Broadcast Epoxy Flooring and Car Park Systems

Broadcast Epoxy Flooring and Car Park Systems

Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

Sika Limited

A coloured, rigid epoxy, protective waterproofing and wearing surface for intermediate car park decks and ramps.

Jump to:
+44 (0)1707 394444 www.sika.co.uk
Description

Sikafloor® - 161 is a two component, solvent free, moisture tolerant epoxy resin primer binder for most Sikafloor systems.

Suitable areas of application:

  • Industrial areas.
  • Abattoirs.
  • Car parks.
  • Water treatment plants.
  • Workshops.
  • Food processing areas.
  • Manufacturing areas.
  • Laboratories.
  • Storage areas.
  • Breweries.
  • Tunnel walls.
  • Decontamination areas.
  • Cleanrooms.

Features and benefits:

  • Waterproof.
  • Abrasion resistant.
  • Impact resistant.
  • Intermediate layer underneath Sikafloor-263 SL and Sikafloor-264

Preparation:

The cementitious substrate should be sound and of sufficient compressive strength (minimum 25 N/mm²) and pull off strength (minimum 1.5 N/mm²). The surfaces must be dry and free of all contaminants, e.g. oils, grease, surface treatments and coatings, etc. The substrate must be prepared mechanically to achieve an open textured fine gripping surface, free of cement laitance. Weak concrete should be removed and surface defects such as blowholes and voids must be fully exposed. All dust, loose and friable material must be completely removed, preferably by brush and vacuum, from all surfaces before application of the coating. Prior to application, confirm substrate moisture content.

General information

Uniclass 2015

Ss_30_40_30_40 Liquid-applied cold roof covering systemsPrimary

CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Liquid-applied cold roof covering systems

Product Reference

Sikafloor 161

Colour

Contact manufacturer for range and to obtain samples.

Standard product features

Primer:

Apply Sikafloor® - 161 to the surface at a minimum consumption rate of 0.4 kg/m2. Sikafloor® - 161 can be applied onto substrates with a surface moisture content of up to 6% pbw measured using the Sika® - Tramex meter (at the time of application).

Base/Wearing course:

  • Sikafloor®-161 filled. 1 x Sikafloor®-161 + quartz sand (0.1 - 0.3 mm).
  • Resin and filler content is increased depending on location of Internal decks or ramps/turning areas. Contact Manufacturer for specific details

Broadcast:

Broadcast with 0.6-1.2mm Quartz Aggregate @ consumption of ca. 4-6 kg/m2 to achieve the desired slip resistance (If necessary, different aggregate may be used in order to fulfil the client’s specific requirements).

System thickness:

Approximately 2–4 mm.

Product Options

Seal coat:

  • Sikafloor®-264. Apply a sealing 1-2 coats of Sikafloor 264 by roller at a minimum consumption of 0.7 - 0.8 kg/m2, per coat. (NB. Certain colours may require a slightly increased consumption).
  • Sikafloor 18 Pronto PMMA seal coat can be used as an alternative to Sikafloor 264 for application at lower temperatures and for fast curing.

Third party certifications
  • BS EN 1504
Similar products from Sika Limited