Bituthene® 8000/ 8000S

Bituthene® 8000/ 8000S

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

GCP Applied Technologies

Flexible preformed cold applied waterproof and gas resistant membrane with a solar reflective carrier film.

Jump to:
+44 (0)1753 490000 www.gcpat.com
Application

Brush the membrane onto the surface to ensure good initial bond and exclude air. On high walls it may be necessary to batten fix the membrane to prevent slippage.

Description

An advanced self-adhesive water, moisture and gas proofing membrane. Use for protection of sub-structures in accordance with the relevant requirements of BS 8102.

The membrane has a unique non-metalized grey solar reflective composite carrier film to reduce heat gain while the membrane is exposed and to easily spot damage prior to placement of overlying construction. The membrane is specially formulated to allow application to "green concrete" and able to be applied in damp or marginal weather conditions with the use of a moisture tolerant primer system.

Substrate:

Monolithic concrete blinding is preferred which should be regular, smooth and free of loose aggregate and sharp protrusions. Ensure all surfaces are free from ice and frost.

Application:

Brush the membrane onto the surface to ensure good initial bond and exclude air. On high walls it may be necessary to batten fix the membrane to prevent slippage.

Joint laps:

Minimum laps of 50 mm are recommended.

General information

Uniclass 2015

Pr_25_57_08_08 Bitumen sheetsPrimary

CAWS

J40/180 Self-adhesive bitumen gas retardant damp proofing/ tanking

J40/45 Self-adhesive bitumen gas retardant damp proofing/ tanking

J41/125 Single layer reinforced bitumen membrane inverted roof covering

Specification data - Bitumen sheets

Product Reference

Bituthene® 8000/ 8000S

Primer

Not required

Bituthene® Primer S2

Continuity sealant

Not required

Bituthene® LM

Standard product features

Thickness:

1.5 mm.

Product Options

Primer:

Bituthene® Primer S2 is a solvent based quick drying, damp and green concrete tolerant, rubberised primer.

Continuity sealant:

Bituthene® LM is a high performance liquid membrane providing waterproof continuity at angles and for detailing terminations at pile caps and pipe penetrations.

Third party certifications
Similar products from GCP Applied Technologies