Bekamatic - Gates

  • Factories and workshops.
  • Administrative centres.
  • Public buildings.
  • Play and sport grounds.
  • Schools.
  • Parks.
  • Airports.
  • Military sites.


The "expert" gate. The design, construction, and finish of our Bekamatic® SC automatic cantilever results from over 15 years of practical experiences from installations combined with Betafence's superior technological know-how.

The direction of opening (looking from the outside of the fencing): Left / right.

Features and benefits:

  • Cantilever automatic gate.
  • Intensive use.
  • Highly resistant coating with a strong construction.
  • Special executions possible.
  • Easy installation.


  • EN 10346: Continuously hot-dip coated steel flat products – technical delivery conditions.
  • ISO 9227: Corrosion tests in artificial atmospheres - salt spray tests.
  • ISO 16474-3: Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps.
  • Bekamatic SC 6000: G20 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics.
  • Bekamatic SC 10000: EN 13241-1: Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics.

General information



RAL 6005 (Moss green).


RAL 7016 (Anthracite grey).


RAL 9010 (Pure white).


RAL 9005 (Jet black).


Polyester powder coated

Plastic coated with polyester. Min. coating thickness: 100 μm. The polyester coating thickness is the average of 10 measurements. At the coast or in corrosive environments, a higher polyester coating thickness is recommended. The typical value is min. 150 μm at an average of 10 measurements (always in consultation between buyer and seller).


Made of galvanized steel sheet (min. 275 g/m² measured double-sided).



Both the gates and the posts are made of steel grade S250 Z275. Except for the underside beam of the gate wing. For the R2000, the steel grade is S350 Z275, for the R2800 it is S390 Z275.

Frame made of fully welded construction. The tensioning system is built into the gate frame so that the gate itself is kept perfectly horizontal when opening and closing.





Ten years

Standard 10 years guarantee.

Uniclass 2015

Pr_30_59_34_14 Carbon steel gatesPrimary


Pr_30_59_34_14 Loose laid gas retardant damp proofing

Q40/40 Steel gates/ Gate posts

Q40/560 Steel

Specification data - Carbon steel gates Enhanced data




3000 mm.

4000 mm.

5000 mm.

6000 mm.

7000 mm.

8000 mm.

9000 mm.

10000 mm.

11000 mm.

12000 mm.


Other dimensions available on request.


1200 mm.

1500 mm.

1700 mm.

2000 mm.

2400 mm.


Other dimensions available on request.


Carbon steel.

Steel grade S250 Z275. A double guiding and end post is used.

The top of the post is closed off with a cap. That way, any cables can be easily inserted. The post is welded to a floor plate. This floor plate can be attached to the concrete base with 4 M16 ground anchors

Gate leaves

Carbon steel vertical section.

Finish as delivered


Applied finish

Powder coated.

Product Reference

Bekamatic SC 6000

Maximum operation speed: 12 m per minute. With E145 controller.

Bekamatic SC 10000

Maximum operation speed: 18 m per minute. With eP 104 controller.



RAL 6005 (Moss green).


RAL 7016 (Anthracite grey).


RAL 9010 (Pure white).


RAL 9005 (Jet black).


All other RAL colours on request.


Robusta bar railings.

Square tubes.

Securifor panels.

Nylofor panels 2D.

Nylofor panels 2DS.

Nylofor panels 3D.

Show more

Motorized operation

Single-phase motor.

Bekamatic - Gates Bekamatic SC 6000 - Control E145, Power 370 W, speed 12 m/min.

Three-phase motor.

Bekamatic - Gates Bekamatic SC 10000 - Control EP 104, Power 550 W, speed 18 m/min.


Poured into foundation.

Standard - Can be reinforced by sliding in 12 mm round iron.

l-iron (PE80).

With 18 mm round iron welded on top.

Access control

Not required.

Card reader.

Code keypad.

Dead man's switch.

GSM module.

Fitted into the control box.

Show more

Beam size

100 x 100 x 3 mm.

Frame constructed with an under-beam (for 3–6 m width).

150 x 100 x 3 mm.

Frame constructed with an under-beam (for 6–9 m width).

200 x 100 x 4 mm.

Frame constructed with an under-beam (for 9–14 m width).


60 x 60 x 2 mm.

Welded frame (for up to 9 m width).

100 x 100 x 3 mm.

Welded frame (for 9–14 m width).

Bar type

Welded bars.

25 x 25 x 1.5 mm, with a distance of 110 mm between the bars. Provided with an external adjustable lock.

Digital objects
PlatformCompatibleVersionCertified to
- 1 1.3
Revit 2016 1 1.3
Download now from NBS National BIM Library
Similar products from Betafence (a Praesidiad brand)