Compare

BauderTEC DBR 06 Air & Vapour Control Layer

Name: BauderTEC DBR 06 Air & Vapour Control Layer
Brand: Bauder Ltd
SKU: oT6NEVzA3EgLehgY6hShkN

Verified by manufacturer 4 months ago

Bauder Ltd

Third party certifications:

EPD
Certificate type

Bitumen air and vapour control layer (AVCL).

Jump to:

+44 (0)1473 257671 Website

Application

The product is used as an air and vapour control layer in Bauder Single Ply and Cold Applied Liquid systems for installation over certain existing roof systems and all common deck substrates, including profiled metal decks, following the application of Bauder Activator-Primer or Bauder SA Bonding Primer. It is also used as the carrier membrane over insulation and timber decks with Bauder Cold Applied Liquid systems. It is not intended for direct application to concrete decks or as temporary waterproofing.

Description

A technically advanced self-adhesive elastomeric reinforced bitumen air and vapour control layer, featuring an aluminium foil facing for vapour impermeability. The product is thinner than other Bauder air and vapour control layers and is therefore lightweight. If this product is being used in a fully bonded system then a Bauder Self Adhesive Primer will be required.

The product benefits from cleaner, safer and faster installation than traditional torch applied membranes.

Only to be used as part of a full Bauder Single Ply or Cold Applied Liquid Waterproofing System.

General information

Color	Silver
Finish	Foil Guidance for specification option: Top: Aluminium foil, Bottom: Peel off release film covering self-adhesive bitumen. Manufacturer guidance Top: Aluminium foil
Material	Bitumen
Length	32000 mm
Width	1250 mm
Height	0.6 mm
Warranty description	- Manufacturer guidance A comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information.

Uniclass	Pr_25_57_08_75 Reinforced bitumen roofing sheetsPrimary
CAWS	J42/110 Warm deck roof covering J42/10 Warm deck roof covering P10/310 Air and vapour control layer J42/395 Air and vapour control layer P10/60 Air and vapour control layer

Specification data - Reinforced bitumen roofing sheets

Material	-
Bitumen modification	Elastomeric.
Thickness (minimum)	0.6 mm.
Weight (minimum)	0.6 kg/m².
Surface finish	-
Top	Aluminium foil.
Underside	Peel off release film covering self-adhesive bitumen.
Colour	Silver.
Third-party certification	BRE Green Guide A+ to B rating (depending on deck type).

Reinforcement	50 g/m²– aluminium/ polyester combination.
TensileStrength	>950/50 N/mm (length). >750/50 N/mm (diagonal).
Water vapour transmission	≥1500.
Reaction to fire	Class E.

Sustainability data

Country of product manufacture	Germany
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	0.05 kg CO₂ eq/m² Manufacturer guidance Please refer to EPD on the Bauder website. EPD data can vary, please ensure that the scope and context of the EPD data is considered when comparing EPD’s for different products