Bauder LiquiTEC Cold Roof System - Cold Applied

Bauder LiquiTEC Cold Roof System - Cold Applied

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Bauder Ltd

Cold liquid applied, cold roof system suitable for new build, refurbishment and green roof applications. A range of colour finishes are available.

Jump to:
+44 (0)1473 257671 www.bauder.co.uk
Description

Cold liquid-applied, cold roof system suitable for new build, refurbishment and green roof applications. A range of colour finishes is available. It is compatible with most existing waterproofing products, making it suitable for use as an overlay system.

Key features:

  • Exceptionally fast-curing poly(methyl methacrylate) (PMMA) resin.
  • All system elements are totally cold-applied.
  • System formulation delivers superior root resistance.
  • Products are solvent, isocyanate and halogen-free.
  • High-performance fire-retardant prevents spread of flame.

Benefits:

  • Cost savings through quick installation times.
  • Avoids inherent risks associated with hot works.
  • Approved for green roof landscaping by FLL.
  • Minimal impact on the environment.

General information

Finish

Smooth

Features

This BIM Object must be supported by a project specific specification from Bauder, incorporating system build-up, detail design and performance calculations if a full Bauder system guarantee is required. Please contact your local Bauder Representative or technical@bauder.co.uk

Material

Liquid applied polymethylmethacrylate membrane

WarrantyDescription

Guarantee options could include ‘Product’, ‘Product and Workmanship’ and ‘Product, Workmanship and Design’ Guarantees. All guarantees available for this system are subject to the works being carried out in accordance with the Bauder specification and being installed by a Bauder Approved installer. For full details and further information regarding guarantees and alternative systems please contact your local Bauder Representative or technical@bauder.co.uk

Uniclass 2015

Ss_30_40_30_40 Liquid-applied cold roof covering systemsPrimary

CAWS

J31/110 Cold deck roof coating

J31/5 Cold deck roof coating

Specification data - Liquid-applied cold roof covering systems

Product Reference

Bauder LiquiTEC Cold Roof System - Cold Applied

Primer

Bauder LiquiPRIME 1

For use over timber and bitumen-based substrates, used to seal substrate and improve adhesion.

Bauder LiquiPRIME 2

For use over brick, block and cementitious-based substrates, used to seal substrate and improve adhesion.

Waterproofing coating

-

Type

LiquiDEK, Blue grey (RAL 7031)

Standard, cold liquid-applied, fast-curing waterproofing resin.

LiquiDEK, Stone grey (RAL 7030)

Cold liquid-applied, fast-curing waterproofing resin.

LiquiDEK, Traffic grey (RAL 7043)

Cold liquid-applied, fast-curing waterproofing resin.

Reinforcement

Bauder 110 g/m² reinforcement fleece

Accessories

See 'Options' below and insert requirements.

Standard product features

Waterproofing coating:

- LiquiDEK:

A cold liquid-applied, fast-curing waterproofing resin, for use on the main roof area of the LiquiTEC Roof System. It is applied in two coats, ‘wet-on-wet’, with a layer of Bauder 110 g/m² reinforcement fleece between them. The product is a poly(methyl methacrylate) (PMMA) resin-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.

  • Coverage: 3 kg/m² (minimum).
  • Application temperature: -5 to +35°C.
  • Application method: roller.
  • Rainproof time: 30–90 minutes.
  • Overcoat/ traffic time: 45–120 minutes.

Product Options

Primer:

- Bauder LiquiPRIME 1:

A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over timber and bitumen-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.

  • Colour: Clear.
  • Coverage: 0.4 kg/m² (minimum).
  • Application temperature: 0–35°C.
  • Application method: Roller.
  • Rainproof time: 30 minutes (approximate).
  • Overcoat/ traffic time: 45 minutes (approximate).

- Bauder LiquiPRIME 2:

A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over brick, block and cementitious-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.

  • Colour: clear.
  • Coverage: 0.4 kg/m² (minimum).
  • Application temperature: 0–35°C.
  • Application method: roller.
  • Rainproof time: 30 minutes (approximate).
  • Overcoat/ traffic time: 45 minutes (approximate).

Accessories:

- Bauder GRP Trim:

GRP roof edge trim for use with Bauder bituminous roof systems. Available in colours of either grey or black and a choice of profiles to suit the requirements of most projects.

- Bauder Aluminium Termination Bar:

Natural finish aluminium alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

- Bauder GRP Termination Bar:

Black glass-reinforced plastic (GRP) alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

- Bauder lightning conductors:

Lightning conductor clips are specially designed, secure clips that allow for movement.

  • Bauder Lightning conductor - Type 4: polyvinyl chloride (PVC)-coated or bare conductor.

- Bauder insulated rainwater outlets:

For maintaining thermal continuity at drainage points. Suitable for warm, cold and inverted roof construction, the high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet.

Designed for use when connecting to conventional drainage systems, with excellent flow rate performance, and is suitable for both new build and refurbishment projects. Outlets are included in the Bauder waterproofing system guarantee as they are integrated components.

Flow rate figures (where applicable) are based on BS EN 12056:3:2000, typically taken using a 35 mm header of water, including leaf grille:

  • Bauder Bitumen Compact Vertical Outlet DN100: insulated internal outlet, 6.1 L/s.
  • Bauder Bitumen Vertical Outlet DN70: insulated internal outlet, 7.1 L/s.
  • Bauder Bitumen Vertical Outlet DN150: insulated internal outlet, 7.2 L/s.
  • Bauder Bitumen Warm Roof Refurb Outlet DN63: insulated internal outlet, 6.1 L/s.
  • Bauder Bitumen Warm Roof Refurb Outlet DN90: insulated internal outlet, 5.7 L/s.
  • Bauder Bitumen Refurb Outlet DN95 – Uninsulated straight drop outlet, designed to ensure that the maximum flow rate of the existing downpipe is not exceeded.
  • Bauder Bitumen Refurb Outlet DN125 – Uninsulated straight drop outlet, designed to ensure that the maximum flow rate of the existing downpipe is not exceeded.
  • Bauder Insulated Parapet Outlet DN100, including pre-assembled pipe and dome grate: 0.6 L/s connected to external pipework; 0.7 L/s connected to external hopper.
  • Bauder Parapet Emergency Overflow Stainless Steel DN70: emergency overflow/ tell-tale.

- BauderSOLAR Photovoltaic Mounting System:

Bauder Flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings, nor is it ballasted, which would add additional weight loading to the roof. Specifically designed to be installed on Bauder bituminous or single-ply waterproofing systems and provide a lightweight, low-risk and quick-to-install mounting solution for framed solar modules.

- Bauder LiquiFIBRE Detailing Kit:

Fast-curing waterproofing resin, containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen-free.

- Bauder LiquiDETAIL:

Cold liquid-applied, fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing, and is solvent, isocyanate and halogen-free.

- Bauder rooflights/ glazing/ ventilation:

All these glazing products are fully compatible with the roof waterproofing systems. Consult Bauder for details and insert requirements.

  • BauderDOME Rooflight.
  • Bauder Euroglaze Rooflight.
  • Bauder Special Modular Rooflight.
  • Bauder Continuous Rooflight.
  • Bauder Walk-on Rooflight.
  • Bauder Direct Glazing.
  • Bauder AOV.
  • Bauder Modular Link Glazing.
  • Bauder Structural Rooflight.
  • Bauder Fire Rated Rooflight.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2017 1 1.2
Download now from NBS National BIM Library
Literature
Third party certifications
  • Certificate: 14/5152 - Certification
Similar products from Bauder Ltd