Bath Filling
Description

The bath filling control system can be used with wave-on or tactile switches. The half fill level is half that of the full fill which is adjustable. There are a number of kits available to suit a wide range of requirements. Benefits of the bath filling control system are similar to the shower control system except that it operates a single valve post thermostatic mixer, with the option of hot and cold if required. An additional control system can be installed if warm and cold top up is required as well as the full fill and half fill settings. Various sensor plates, water spouts and thermostatic mixing valves are available. To choose the most suitable solution, consult manufacturer for details.

Two bath filling options are available from DVS:

Option 1:

  • VR01-024 – High-security bath filling backplate.

Plus a choice of:

  • VR00-005 – Push sensor for back plates with Blue insert (C).
  • VR00-006 – Push sensor for back plates with Red insert (H).
  • VR00-001 – Wave-on sensor for back plates with Blue insert (C).
  • VR00-002 – Wave-on sensor for back plates with Red insert - (H).

Option 2:

  • SH07-043 – High security WM bath spout - 45° (113 mm long from top).

Plus a choice of:

  • SH07-054 – Bath filling plate with half-fill/full-fill, 2 x tactile switch.
  • SH07-055 – Bath filling with half-fill/full-fill indication - plate only.
  • SH07-053 – Shower push control plate only, 1 x tactile switch required.
  • AC02-052 – Tactile switch with 38 mm bezel for use with control plates.

General information

Uniclass 2015

Pr_40_20_87_07 Bath mixer taps with shower hose and hand spraysPrimary

CAWS

N13/35 Baths

N13/355 Baths

Specification data - Bath mixer taps with shower hose and hand sprays

Product Reference

Option 1, VR01-024

High security bath filling backplate.

Option 2, SH07-043

High security WM bath spout - 45° (113 mm long from top).

Literature
Similar products from Dart Valley Systems Ltd