NBS Source
List your products
Application

- Concrete substrates:

Provides protection against water penetration, and consequently against concrete corrosion. The polyurea coating provides crack-bridging and clings, as a seamless sprayed-on barrier layer, like a liquid film. Thanks to the fact that it cures within seconds, even complicated shapes and vertical surfaces can be sealed without problem.

Description

Two-component polyurea spray elastomer for the protection of various substrates.

Features and benefits:

  • Solvent-free.
  • Fast-curing.
  • Crack-bridging.
  • Lastingly elastic.
  • Wear-resistant.
  • Resistant to chemicals.
  • Resistant to low temperatures.
  • CE marked to 1119 – CPD – CE2+004 EN 1504-2.

Applications:

- Concrete substrates:

Provides protection against water penetration, and consequently against concrete corrosion. The polyurea coating provides crack-bridging and clings, as a seamless sprayed-on barrier layer, like a liquid film. Thanks to the fact that it cures within seconds, even complicated shapes and vertical surfaces can be sealed without problem.

- Wooden substrates:

The product can be applied as an anti-slip flooring. The load adheres to the rough surface of this product, which saves additional and time-consuming safety measures, and increases the lifespan of the load-carrying decks. The polyurea surface has been tested by DEKRA in accordance with VDI 2700.

- Metal substrates:

Suitable as an anti-corrosion waterproof coating. The excellent tensile strength and abrasion values offer superior protection against wear. This pays off in places where highly abrasive bulk material is being moved, such as in mining. At the same time, the reliable polyurea coating guaranties a high degree of corrosion protection.

- Water Regulations Advisory Scheme (WRAS)-approved:

The product is approved for potable water contact, according to WRAS approval number 1704575. Additional local regulations and certification needs have to be taken into consideration before usage for applications with potable water contact.

General information
Specification data - Liquid tanking resins
Product Reference

BASF Elastocoat C 6335/134

Standard product features

Technical characteristics:

  • Density (to DIN 53 420 (20°C)): 1 g/cm³.
  • Hardness (to DIN ISO 7619-1): shore A: 95, shore D: 60.
  • Tensile strength (to DIN 53 504): 19 N/mm².
  • Elongation at break (to DIN 53 504): 160%.
  • Tear strength (to DIN 53 515): 70 kN/m.
  • Abrasion (to DIN 53516): 75 mg.
  • Impact resistance: Class III.
  • Adhesion strength by pull-off test: ≥2.
  • Capillary absorption and permeability <0.1.
  • Resistance to severe chemical attack test liquid 1, 3, 10 of EN 13529: Class I.
  • Permeability to CO2: >50.
  • Abrasion resistance: <3.
  • Permeability to water vapour: Class II.

Literature
Similar products from ECON Polyurethanes, a BASF distributor