Compare

ARDEX DPM 1 C One Coat Damp Proof Membrane

Name: ARDEX DPM 1 C One Coat Damp Proof Membrane
Brand: Ardex Ltd – Flooring, Tiling & Screeding products
SKU: dA8Tgr5sUjUc767g5tN9A5

Verified by manufacturer 2 months ago

Ardex Ltd – Flooring, Tiling & Screeding products

Third party certifications:

EPD
Certificate type

One-coat damp proof membrane and residual moisture suppressant. Protects the final floorcovering from residual construction moisture and rising damp.

Jump to:

+44 (0)1440 714939 Website

Application

Suitable for use on cement/sand screeds containing water based under floor heating systems.
Specifically developed to provide either a damp proof membrane, or to suppress residual moisture in concrete slabs and cement/sand screeds which are well compacted and sound, where readings of up to 98% RH are measured.
Can be used as a damp proof membrane that deals with damp concrete where a structural damp proof membrane is not present or is ineffective, with the risk of ground bearing moisture.
A thinner application may be used to suppress residual moisture in concrete slabs and cement/sand screeds which are well compacted and sound, where readings of up to 92% RH are measured.
Suitable for use on Calcium Sulphate screeds up to 90% RH. The surface temperature should not exceed 27°C in accordance with BS 8203 and BS 5325.
Suitable for heated concrete and cement/sand screeds. The surface temperature should not exceed 27°C in accordance with BS 8203 and BS 5325.

Description

A one coat system to suppress residual moisture in lightly shot blasted power floated concrete sub-floors and dense cement and sand screeds. It provides a surface damp proof membrane (DPM) where a DPM is not present in the floor or it is not effective.

Features and benefits:

Guarantees the early laying of all floorcoverings.
Walkable in six hours.
Protects the final floorcovering from residual construction moisture and rising damp.
Can be applied where a structural DPM is not present or is ineffective.
Suitable for use on surfaces with the highest measurable levels of moisture content (up to 98% RH).
Adheres to saturated concrete even at lower temperatures.
Can receive ARDEX Smoothing and Levelling Compounds in as little as six hours.
Apply ARDITEX NA and ARDITEX RS PLUS direct without priming.

Thickness of application:

Minimum 250—350 microns, as appropriate, to be checked using an ARDEX wet film thickness gauge.
Coverage of 1.8 m²/kg (350 microns)—2.5 m²/kg (250 microns) is not to be exceeded.

General information

Color	Black
Finish	Smooth
Material	Epoxy resin
Shape	Formless
Length	Bespoke
Width	Bespoke
Height For 85% RH use a A2 Trowel at 60 degrees to give a minimum thickness of 250 microns. For 92% RH use a B1 Trowel at 60 degrees to give a minimum of 300 microns. For 98% RH use a B2 Trowel at 60 degrees to give a minimum of 350 microns. The applied film thickness can be checked with wet film thickness gauge.	-

Uniclass	Pr_35_31_77_15 Concrete sealersPrimary
CAWS	M50/10 Resilient floor tiling M50/110 Resilient floor tiling M50/130 Carpet tiling M50/15 Carpet tiling M50/150 Sheeting M50/170 Carpeting M50/20 Sheeting M50/25 Carpeting