Aquazip ADV

Third party certifications:

QA Certificate
Certificate type

Two-component, cementitious, highly elastic waterproof coating.

Jump to:

Application

For professional use. Suitable for the following:

Waterproofing and protection of concrete objects (including objects under load) against penetration of gases such as CO2 and de-icing salts.

Elastic skim coat for plaster with micro cracks.

Cement-based floor screeds.

Ceramic floors.

Plasterboard and marine plywood (prior to the application of ceramic tiles).

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

Description

Two-component, cementitious, highly elastic waterproof coating. Composed of cement, graded sand, chemical additives and synthetic polymers in emulsion.

Features and benefits:

Good workability, adhesion and flexibility.

Suitable for use in pools.

Applicable by roller, brush or machine.

Contributes to LEED® credits.

CE marked, and manufactured in accordance with EN 1504-2 and EN 14891.

Applications:

For professional use. Suitable for the following:

Waterproofing and protection of concrete objects (including objects under load) against penetration of gases such as CO2 and de-icing salts.

Elastic skim coat for plaster with micro cracks.

Cement-based floor screeds.

Ceramic floors.

Plasterboard and marine plywood (prior to the application of ceramic tiles).

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

Specification data

Product Reference	Aquazip ADV

Standard product features

Technical characteristics:
Yield: 1.65 kg/m² (approximately, per mm of thickness).
Specific weight: 1650 kg/m³ (approximately).
pH value: >12.
Mixing ratio: 2:1 (component A: component B).
Workability time: 1 hour.
Application temperature: 5–35°C.
Waiting time (before applying tiles): 5 days at 20°C and 65% relative humidity (minimum).
Maximum thickness per coat: 2 mm.
Compliance: To EN 14891: CM-01P; to EN 1504-2: PI-MC-IR.
- Component A:
Form: Grey powder.
Specific weight: 1300 g/L.
Dry residue: 100%.
- Component B:
Form: White latex.
Specific weight: 1010 g/L.
Dry residue: 53%.
- Compliance to EN 14891:
Impermeability to water under pressure (1.5 bars for 7 days of positive lift): No penetration and weight increase ≤20 g.
Crack bridging ability (in normal conditions and at low temperatures): ≥0.75 mm.
Tensile adhesion strength (initial, after water immersion, after heating, after freeze-thaw cycles, immersion in chlorinated water and contact with lime water): ≥0.5 N/mm².
- Compliance to EN 1504-2:
Measurement of direct tensile adhesion strength: Flexible systems without traffic: ≥0.8 N/mm²; flexible systems with traffic: ≥1.5 N/mm².
Freeze-thaw cycles with de-icing salt immersion: Flexible systems without traffic: ≥0.8 N/mm²; flexible systems with traffic: ≥1.5 N/mm².
Storm cycles: Flexible systems without traffic: ≥0.8 N/mm²; flexible systems with traffic: ≥1.5 N/mm².
Determination of carbon dioxide permeability: Sd >50 m.
Determination and classification of liquid-water transmission rate: 9.96 g/m²∙d.
Determination of water vapour transmission rate: W <0.1 kg/m²∙h^0.5.

Third party certifications

Emissions Dans L'air Interieur: Certificate: A
GEV-EMICODE: Certificate: EC1+ : Very low emission