AquaSafe Alarm

The Triton AquaSafe Alarm is a warning system which alerts the end-user in the event of a high level situation in the chamber/ sump, or when a high level situation has been recorded, there has been a power failure to the alarm or when a service is due.

A battery is incorporated within the panel to power the alarm in case of mains power failure. The system is designed to activate via a mini or sump float switch located inside the chamber/ sump. It is set to activate higher than the activation point of the primary pump.

The alarm is designed for use indoors or in a suitable waterproof outdoor enclosure within 5 m of the base of the pump chamber/ sump (10 m if using a sump float switch). It should not be installed outdoors without suitable protection from both water and extreme temperatures. External devices such as dial-out telemetry or a building management system can be connected to the alarm.

The system conforms to the Low Voltage Directive, EN 61010:2010, the EMC Directive EN 55014:2006, A1 and EN 55014-2:2015. CE marked.

Supplied complete with the alarm panel, 16 and 20 mm glands, either a mini or sump float switch and installation guidelines.

12-month guarantee.

General information

Uniclass 2015

Pr_75_50_46_30 Float switchesPrimary


R18/310 Private packaged pumping stations

Specification data - Float switches

Product Reference

AquaSafe Alarm


Mini float switch

Sump float switch

Standard product features

Technical characteristics:

  • Size (l x w x h): 124 x 122 x 85 mm.
  • Material: ABS.
  • Colour: Grey.
  • Power supply: 230 VAC/ 50 Hz.
  • Rated power: < 10VA.
  • Internal battery: 6 VDC, 1.3 Ah.
  • Alarm sound level: 85 dB.
  • Mains power cable length: 1 m.
  • Operating temperature: -10°C to + 40°C.

Similar products from Triton Systems