NBS Source
Anomatch - Powder Coating

Anomatch - Powder Coating

Powdertech (Corby) Ltd Third party certifications:
  • QMS ISO 9001

    QMS ISO 9001

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

  • EPD

    EPD

    Certificate type

Anomatch architectural powders have been specially designed to represent architectural anodising on both aluminium and galvanized steel.

Jump to:
+44 (0)1536 400890 www.powdertechcorby.co.uk

Application

  • Base material: Mild steel, galvanized steel or aluminium.
  • Material form: Solid, perforated, expanded or fabricated.
  • Application. Solar control; curtain wall; facade; cladding; capping; trims; soffit and associated components; balconies; balustrade and handrail. Architectural, retail, commercial and residential.

Description

Anomatch architectural powders have been specially designed to represent architectural anodizing on both aluminium and galvanized steel. Anomatch creates a finish that enhances the metal with a soft, lustrous sheen.


Anodized aluminium has a reputation for its 'living' quality, with a natural metallic radiance. Anomatch creates the same effect with additional benefits.


Features and benefits:

  • Range of over 20 colours, bronze, silver, gold and blue/grey.
  • Long guarantees – up to 40 years.
  • Low maintenance
  • Can be repaired on site or off-site.
  • A faster turn around and lower cost than anodising.
  • Excellent weather resistance, excellent mechanical properties
  • Colour stability
  • Flexible coating which can be drilled, cut and sawn without fracturing the coating,
  • Does not require expensive, high grade, anodizing quality aluminium.
  • A homogenous and consistent finish across different batches of metal.
  • A homogenous and consistent finish on adjoining material.
  • Colour consistency finish across welded joints.
  • Steel can be chosen for its strength - and coated to appear anodized.
  • Qualicoat Class 1 or class 2 approved powder products.
  • All Anomatch finishes and application conform to BS EN 12206-1. Powder coating on aluminium.
  • All Anomatch finishes and application conform to BS EN 13438: 2013. Powder coating on galvanized steel.
  • Resistance to boiling water: no blistering and no loss of adhesion.
  • Cylindrical mandrel bending: To ISO 1519, 5 mm mandrel, no cracking or detachment.

General information

Color

Full details at: Powdertech Anomatch | Powdertech Corby

Bronze

Silver

Gold

Blue

Grey

Finish

Smooth matt and deep matt pearlescence

Matt

Material

Powder coating material is a thin layer of pigmented polyester applied to a base metal.

Polyester

Shape

Formless

WarrantyDescription

25 year

For C2 and C3 environments: 25-year warranty for gloss, colour and adhesion.

For C4, C5I and C5M environments: Guarantees are conditional on project location, environmental conditions and pre-contract approval.

Uniclass

Pr_35_31_68_66 Powder coatingsPrimary
Pr_35_31_22_55 Multicoloured finish spatter coatings
Pr_35_31_22_54 Multicoloured coatings

CAWS

R10/321 Combined fascia, soffit and gutter

R10/13 Combined fascia, soffit and gutter

L35/420 Carbon steel components

L35/410 Aluminium components

H92/130 Major non-standard components

H31/120 Metal

L30/560 Proprietary balustrades

L30/550 Purpose-made balustrades

H10/10 Patent glazing

H20/10 Sheet cladding

H31/10 Metal

H43/10 Metal insulating sandwich panel

H10/115 Patent glazing

H11/130 Sun screens

H11/110 Curtain walling

H11/137 Windows/ opening lights

H11/140 Louvres

H11/135 Doors

H11/145 Integrated access equipment

H13/115 Structural glass assembly

H20/150 Sheet cladding

H20/155 Sheet cladding

H92/120 Rainscreen cladding

H92/830 Powder coating

L10/460 Rooflights

L10/550 Glazed metal screens

L10/560 Glazed screen system

L10/650 Metal louvres

Z31/120 Powder coating materials

L10/45 Rooflights

L30/55 Proprietary balustrades

L30/50 Purpose-made balustrades

L10/51 Glazed screen system

L10/54 Louvres

H11/830 Powder-coating

H43/120 Metal insulating sandwich panel

Specification data - Powder coatings Enhanced data

Standard

BS EN 12206-1.

Powder formulation

Manufacturer's standard.

Gloss level

5–35%.

At 60ᵒ.

Film thickness

>60 µm.

Adhesion

Rating 0.

Dry adhesion cross hatch (ISO 2409) Rating 0, no coating detachment, wet adhesion (ISO 2409) after 1 hour pressure cooker rating 0, no detachment.

Accelerated weathering

1000 hours no significant change in colour, >50% retained gloss.

To ISO 16474-2:2013.

Sulphur dioxide resistance

24 cycles no infiltration.

Exceeding 1mm from the scribe, no change in colour or blistering in excess of 2(S2) to ISO 4628-2.

Constant humidity resistance

1000 hours.

To ISO 6272-2, <1mm scribe creep. No blistering in excess of 2(S2) to ISO 4628-2.

Impact resistance

No cracking or detachment.

Tested to ISO 6272-2: Reverse Impact test.

Erichsen cupping

No cracking or detachment.

Tested to ISO 1520, minimum 5 mm indent.

Permeability

No blistering or coating detachment.

Scratch resistance

E2 Pass.

To BS 3900.

Pre-treatment

Aluminium: Titanium-zirconium (TiZr) non-chrome six-stage pre-treatment.

Galvanized steel: Silane (oxsilan) non-chrome eight-stage pre-treatment.

Not required/ other.

Consult manufacturer for details for surfaces other than aluminium or galvanized steel.

Application method

Corona discharge system.

Powder application.

Fire rating (to BS EN 13501)

A2-s1, d0.

Digital objects

Platform Compatible Version Certified to
Revit

Revit 2017

1

2.0
IFC
-

1

2.0
Download now from NBS National BIM Library

Literature

Anomatch data sheet September 2020

Anomatch data sheet September 2020

ISO 9001 : 2015

ISO 9001 : 2015

Case studies

Anomatch™ shines in consistency stakes

Anomatch™ shines in consistency stakes

Perforated aluminium and Anomatch on  Wellcome Genome Campus

Perforated aluminium and Anomatch on Wellcome Genome Campus

Powder coating replaces anodising to achieve high quality finish and colour consistency across varying substrates.

Powder coating replaces anodising to achieve high quality finish and colour consistency across varying substrates.

Third party certifications

QMS ISO 9001

QMS ISO 9001

Quality Management System

QA Certificate

QA Certificate

Axalta Applicator Approval

EPD

EPD

EPD guide

QA Certificate

QA Certificate

Interpon Approved Applicator

QA Certificate

QA Certificate

Interpon Approved Applicator

QA Certificate

QA Certificate

Sherwin Williams Approved Applicator 30.

QA Certificate

QA Certificate

Sherwin Williams Approved Applicator 40

Similar products from Powdertech (Corby) Ltd

Aged Metal - Evolution - Powder Coating

Aged Metal - Evolution - Powder Coating

Colour Palettes Landscape - Powder Coating

Colour Palettes Landscape - Powder Coating

Freeform - Powder Coating

Freeform - Powder Coating

PWF - Wood Finish Powder Coating

PWF - Wood Finish Powder Coating

Rust - Powder Coating

Rust - Powder Coating

Satellite - Powder Coating

Satellite - Powder Coating

Stone - Powder Coating

Stone - Powder Coating

Terracotta - Powder Coating

Terracotta - Powder Coating

Zest - Powder coating

Zest - Powder coating