Cradle to Cradle Certified
Environmental Product Declaration (EPD) - IBU
EMS ISO 14001
EnMS ISO 50001
TUV - Safety and Quality Report
Angled standing seam zinc for facades.
Angled standing seam systems are used in the facade sector and for cladding small surfaces such as fascias, upstands and parapets. They are particularly suitable for visually separating roof and facade surfaces thanks to their height of approximately 25 mm and a seam width of approximately 12 mm. They can be installed horizontally, vertically and also diagonally.
The panels can be delivered with ready-made profiles or bevels or can be produced on the construction site using mobile roll formers.
Angled standing seams are distinguished by particularly low material stresses. In contrast to double standing seams, only one side is closed using a machine or by hand.
Features and benefits:
Pre-PATINA, GRANUM, PRISMO and CLASSIC surfaces.
Maximum panel length 6 m.
Optimum panel length 4 m.
H74/130 Zinc sheet fully supported wall covering
Sheet, strip and plate
To EN 988.
CLASSIC bright rolled.
Reaction to fire
To EN 13501-1, Class A1.
CLASSIC, GRANUM and prePATINA finishes.
To EN 13501-1, Class A2.
Window sill copings.
Cradle to Cradle Certified® Bronze and EN 15804 EPD (CLASSIC and prePATINA).
Contains Red List materials
Country of material origin
Country of product manufacture
Libeskind Villa (Germany)
Centro Aggregazione Giovanile - Youth Center Pieve di Bono (Italy)
Twenty Campus (France)
Le Nid (France)
Activity Centre La Borde (France)
Haapsalu Castle (Estonia)
Wimbledon College ( Wimbledon)
University of Surrey (Guilford)
The Green Man Hub (London)
RAD Building University of Nottingham (Nottingham)
Newhouse of Auchengree (Scotland)
Museum of Transport (Glasgow)
Diploma Learning Centre (Wolverhampton)