NBS Source
I'm a manufacturer

Ancon RD3 Cavity Wall Tie

Verified by manufacturer 2 months ago

Leviat

Stainless steel wall tie with double multi-drip.

Jump to:
+44 (0) 114 275 5224 Website

Application

Suitable for use in partial-fill insulated cavities, especially where the open cavity is small.

Description

A Type 3 tie suitable for external walls of houses and small commercial buildings up to 15 m in height, built on flat sites, where the basic wind speed is up to 27 m/s and altitude is not more than 150 m above sea level.


Features:

  • Available in two lengths to suit cavities up to 150 mm.
  • Meets the requirements of PD6697 as a Type 3 tie.
  • CE marked to BS EN 845-1.
  • Specially designed safety ends to provide excellent mortar key and reduce the risk of injury during handling and installation.
  • Manufactured from high tensile stainless steel wire which offers high resistance to corrosion and low thermal conductivity.
  • For use at less than 2.5/m² (900 mm horizontal and 450 mm vertical centres) and preferably staggered over the wall area.

General information

Length

250 mm

275 mm

Uniclass

Pr_20_85_84_19 Cavity wall tiesPrimary

CAWS

F30/214 Cavity wall ties

F30/24 Cavity wall ties

Product range

Wall Ties and Restraint Fixings

Specification data - Cavity wall ties

Standard

To BS EN 845-1.

Tie type

PD 6697, Type 3 ('Masonry – basic').

Material

Austenitic stainless steel (chrome nickel alloys) – material/ coating reference 3.

Length

250 mm.

Guidance for specification option:

Cavity Width: 101–125 mm.

275 mm.

Guidance for specification option:

Cavity Width: 126–150 mm.

End types

Symmetrical wire loop.

Design embedment length (minimum)

62.5 mm.

Guidance for specification option:

Recommended to achieve a design embedment of between 62.5 mm and 75 mm in each leaf, to allow for site tolerance in both cavity width and centring of the ties.

Additional requirements

-

Mortar joint thickness (minimum)

10 mm.

Compressive load capacity

650 N.

Tensile load capacity

1100 N.

Tie-mounted insulation retaining clips

Ancon Staifix Universal Insulation Retaining Clips (Eco Clip).

Literature

Wall Ties and Restraint Fixings

Wall Ties and Restraint Fixings

Similar products from Leviat

Ancon 25/14 Brick Ties

Ancon 25/14 Brick Ties

Ancon ACOU SP-SD - Acoustic Cavity Wall Tie

Ancon ACOU SP-SD - Acoustic Cavity Wall Tie

Ancon ACOU SP-SP - Acoustic Cavity Wall Tie

Ancon ACOU SP-SP - Acoustic Cavity Wall Tie

Ancon ACOU ZB-ZB - Acoustic Partition Tie

Ancon ACOU ZB-ZB - Acoustic Partition Tie

Ancon ACOU ZB-ZV - Acoustic Partition Tie

Ancon ACOU ZB-ZV - Acoustic Partition Tie

Ancon ACOU ZV-ZV - Acoustic Partition Tie

Ancon ACOU ZV-ZV - Acoustic Partition Tie

Ancon Bubble Foil Insulation Wall Ties

Ancon Bubble Foil Insulation Wall Ties

Ancon Cellular Clay Block Wall Ties

Ancon Cellular Clay Block Wall Ties

Ancon Double Triangle Wall Tie

Ancon Double Triangle Wall Tie

Ancon SPS Flat Bar Wall Tie

Ancon SPS Flat Bar Wall Tie