Verified by manufacturer 4 months ago
The MBT transition coupler for connecting bars of different diameters.
Transition couplers used to connect reinforcing bars of different diameters.
Neither bar end preparation to form threads nor bar rotation are required. The bar ends are supported within the coupler by two serrated saddles, and as the lock-shear bolts are tightened, the conical ends embed themselves into the bar. As this happens, the serrated saddles bite into both the bar and the shell of the coupler.
When the pre-determined tightening torque for the bolts is reached, the heads shear off leaving the top of the installed bolt slightly proud of the coupler. This provides an instant visual check of correct installation.
Features and benefits:
To suit 16/ 12 mm bar.
To suit 16/ 14 mm bar.
To suit 20/ 12 mm bar.
To suit 20/ 16 mm bar.
To suit 25/ 16 mm bar.
To suit 25/ 20 mm bar.
To suit 28/ 20 mm bar.
To suit 28/ 22 mm bar.
To suit 28/ 25 mm bar.
To suit 32/20 mm bar.
To suit 32/ 25 mm bar.
To suit 32/ 28 mm bar.
To suit 40/ 32 mm bar.
Ancon Bartec Plus Couplers
Ancon Bartec Plus Headed Anchors
Ancon Bartec Plus Transition Couplers
Ancon Bartec Plus Weldable Coupler
Ancon MBT Continuity Series Coupler
Ancon MBT ET Series Coupler
Ancon MBT Headed Anchor
Ancon Starter Bar System
Ancon Tapered Thread Headed Anchors
Ancon Tapered Thread Positional Couplers