Verified by manufacturer 2 months ago
Coupler allowing reinforcement at construction joints without the need to drill.
Suitable for providing reinforcement at construction joints without the need to drill.
A coupler that allows reinforcement to be extended at construction joints without the need to drill or otherwise substantially deface the formwork at construction joint locations.
The female part of the coupler is fixed to the formwork with the aid of a nail plate. After removal of the formwork, the nail plate protects the internally threaded end of the coupler. When the nail plate is removed, the male section can be screwed into the existing section of the coupler.
The bar ends are supported within the coupler by two serrated saddles, and as the lock-shear bolts are tightened, the conical ends embed themselves into the bar. As this happens the serrated saddles bite into both the bar and the shell of the coupler. When the pre-determined tightening torque for the bolts is reached, the heads shear off leaving the top of the installed bolt slightly proud of the coupler. This provides an instant visual check of correct installation.
Features and benefits:
To suit 12 mm bar.
To suit 16 mm bar.
To suit 20 mm bar.
To suit 25 mm bar.
To suit 32 mm bar.
To suit 40 mm bar.
Ancon MBT Continuity Series Couplers
Ancon Bartec Plus Couplers
Ancon Bartec Plus Headed Anchors
Ancon Bartec Plus Transition Couplers
Ancon Bartec Plus Weldable Coupler
Ancon MBT ET Series Coupler
Ancon MBT Headed Anchor
Ancon MBT Transition Series Coupler
Ancon Starter Bar System
Ancon Tapered Thread Headed Anchors
Ancon Tapered Thread Positional Couplers