Alwitra Evalon V Single Ply Fully Adhered – Warm Roof

Evaprime SA R.

Guidance for specification option:

A solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates.

Evaprime SA S.

Guidance for specification option:

A high-performance, solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates.

Evaprime SA R.

Guidance for specification option:

A solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates.

Evaprime SA S.

Guidance for specification option:

A high-performance, solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates.

Stratavap.

Guidance for specification option:

StrataVap is a self adhesive, 0.8 kg/m² elastomeric, polymer distilled bitumen membrane for use as an AVCL in roofs over high humidity spaces such as swimming pools and gymnasiums. The upper face consists of a glass fibre reinforced aluminium film, with the underside featuring a protected self-adhesive finish.

Self-adhesive.

Evatherm A Insulation, 1200 x 600 mm.

Guidance for specification option:

EvaTherm A is a high performance rigid polyisocyanurate (PIR) foam board for use in warm flat roofs under built-up felt, mastic asphalt and approved single-ply membrane waterproofing systems.

EvaTherm A is a closed cell, CFC and HCFC-free (zero ozone depletion), rigid polyisocyanurate foam core faced, both sides, with a perforated mineral coated glass fibre tissue. It has an exceptionally low thermal conductivity of 0.025 W/mK.

Thickness (mm) 25, 30, 40, 50, 60, 70, 80, 90,

100, 120, 130, 140, 150 mm. Consult literature and insert requirements.

Instastik.

Guidance for specification option:

INSTA-STIK Roofing Adhesive is a specially formulated polyurethane foam adhesive for the purpose of adhering rigid

insulation boards to flat roofs.

HA Adhesive.

Guidance for specification option:

ICB HA Adhesive is a solvent based pressure sensitive adhesives which can be used for full bonding of EVALON® and EVALON®-V membranes onto concrete, timber, bituminous felts, asphalt, GRP, metals, thermal insulation boards (except plain polystyrene and cork) etc.

Welded jointing of waterproof membrane

Alwitra Standard Rainwater Outlet

Eva-Metal Drip Edge.

Guidance for specification option:

Drip edge profile to be formed from 0.6 mm galvanized steel sheet laminated/coated with Membrane material. Installation: Secure profile to structure with fasteners recommended by membrane manufacturer at maximum 200 mm C/cs.

Eva-Metal Profile

Guidance for specification option:

Eva-Metal Profile to be formed from 0.6 mm galvanized steel composite sheet laminated/ coated with membrane material. Installation: Secure profile to structure with fasteners recommended by membrane manufacturer at maximum 200 mm C/cs. Profile shape and dimensions to be advised.

WF Profile 'WF'.

Guidance for specification option:

WF Profile 'WF' upstand termination profile to be formed from 0.6 mm galvanized steel sheet laminated/ coated with membrane material. Installation: Secure profile to structure with fasteners recommended by membrane manufacturer at maximum 300 mm C/cs. Dress membrane onto profile to overlap fasteners by a minimum of 50 mm and weld materials together

Eva-Metal Water Check Profile.

Guidance for specification option:

Eva-Metal Water Check Profile Water check edge profile to be formed from 0.6 mm galvanized steel sheet laminated/coated with membrane material. Installation: Secure profile to structure with fasteners recommended by membrane manufacturer at maximum 200 mm C/cs.

ICB Fascia/Soffit Fascia.

Guidance for specification option:

ICB Fascia/Soffit Fascia profile to be formed from aluminium sheet. Installation: Secure profile to structure with fasteners recommended by membrane manufacturer at maximum 200 mm C/cs. Profile shape and dimensions to be advised.

FPA Profile 'FPA'.

Guidance for specification option:

FPA Profile 'FPA' upstand profile manufactured from coated aluminium material. Membrane to be fully bonded to upstand using manufacturers approved adhesives Installation: Secure membrane with profile to structure with fasteners recommended by membrane manufacturer at maximum 300 mm C/cs. Apply Manufacturers Approved acrylic sealant to top edge of profile.

Mechanical peelstop perimeter fixing.

Guidance for specification option:

Mechanical peelstop perimeter fixing Supply and install a galvanized steel continuous peel stop profile to base of all parapets, rooflights, AC ventilators and plant room roofs. Peel stop profile fixed at maximum 200 mm centres with approved fasteners and covered over with plain EVALON® membrane minimum 160 mm wide

Lead flashings.

Guidance for specification option:

Created on site using suitable code lead and following the relevant codes of practice.

Alwitra Standard Outlet.

Guidance for specification option:

Alwitra Standard Outlet Manufacturer: ALWITRA® Roofing Systems Ref: Standard Outlet with Vertical/Horizontal Spigot and Top Element Diameter: 100mm/ 125mm/ 75mm Outlet Body manufactured from polypropylene, with separate EVALON® connecting flange and complete with flat grating. Allow to supply and install outlet including all connections to down pipes, and to hot air weld connecting flange to main EVALON® field sheet.

Alwitra Standard SF Outlet.

Guidance for specification option:

Alwitra Standard SF Outlet Manufacturer: ALWITRA® Roofing Systems Ref: Standard SF Outlet with rigid PVC and flexible Evalon Flange Diameter: 50mm to 150mm Outlet Body manufactured from rigid PVC and flexible Evalon flange. Allow to supply and install outlet including all connections to down pipes, and to hot air weld connecting flange to main EVALON® field sheet.

EVA-metal Chute.

Guidance for specification option:

Eva Chute Manufacturer: ICB (Waterproofing) Ltd. Reference: EVA-metal Chute Size: to be advised Relieve substrate as necessary to provide falls required and to ensure that the lower chute flange is set flush with the surface of the main roof area, mechanically fix chute (minimum 2 fixings per flange) using ICB approved fasteners.

Overflow / rainwater outlets.

Guidance for specification option:

Overflow / rainwater outlets Manufacturer: Alwitra – Product of ICB (Waterproofing) Ltd. - Product reference: Outlet Type S overflow pipe with flexible Evalon flange Diameter: To be confirmed Allow to supply and install outlet, and to hot air weld connecting flange to main Evalon field sheet.

Paving Slab Supports PS1.

Paving Slab Supports PA20.

EvaGreen Terrace Pedestals.

Guidance for specification option:

EvaGreen Terrace Pedestals are made up of recycled plastic with a 200 mm diameter based with various heights and adjustable depth.

Protection layer.

Guidance for specification option:

Protection layer - Product reference: HPS 2.5 Protection Fleece Material: Polypropylene Thickness: 3.5 mm.

Interlocking Tiles.

Guidance for specification option:

• ICB Interlocking Walkway Tiles
• 500 x 500 x 30 mm.

Walkway tiles.

Guidance for specification option:

Walkway tiles - Size: 600 x 800 mm - Colour: Grey Fixing: Use 50 mm wide edge weld/bond: To Evalon field sheet: Use EvaTack to adhere to field sheet. Leave expansion gap of at least 50mm between each tile. Tiles to be laid in accordance with the manufacturer instructions.

Rubber matting for protection under plant.

Guidance for specification option:

Rubber matting for protection under plant Fixing: 6 mm Matting is to be loose laid and placed under plant. Ensuring no swarf or grit is on the membrane. Matting to be laid in accordance with the manufacturer's Instructions, and ICB (Waterproofing) installation instructions.

Syngreen tile mats.

Guidance for specification option:

ICB Syngreen tile mats are made up of recycled rubber granulate

• 500 x 500 x 30 mm (Interlocking)
• Colour: Green
• Weight: 4.5 kg
• Permeable: 250 mm.

Standing seam profiles.

Guidance for specification option:

Standing seam profiles Colour: [Slate Grey]. Attachment of standing seam profiles Seam centres: [As client requirement]. Preparation: Clean and dry surfaces beyond full width of joint. Alignment: Straight. Attachment: Continuous weld to membrane.

Lightning Conductor Clips.

Guidance for specification option:

Lightning Conductor Clips Lightning conductor clips, solvent welded to clean membrane surface. Ref: ICB Lightning Conductor Clip for flat bars Fixing Centres: 1000 mm C/cs on horizontal surfaces, 500 mm C/cs on vertical surfaces.