High performance aluminium windows.
New build; refurbishment; low-rise and high-rise buildings; commercial; public sector; industrial; residential; retail; leisure; hospitality; education.
High performance aluminium windows, part of the MB-70 range.
MB-70 is a modern aluminium system intended for exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures.
The system is characterized by a very low value of the overall heat-transfer coefficient Uf, thanks to application of the thermal breaks and gaskets. This is of a great significance in the times of increasing demands for the energy management and the environment protection.
The profiled "omega"-shaped thermal breaks are applied, of a width equal to 34 mm, made from polyamide reinforced with fibreglass. The offered shape of thermal breaks increases the profile rigidity as compared to flat breaks and facilitates the section drainage, ensuring the appropriate thermal insulation in all atmospheric conditions at the same time. The thermal breaks applied in the windows have additional gaskets at the joining point with the sections, as well as tongues dividing the chamber between the internal and external aluminium sections into three parts.
Features and benefits:
Anodized; RAL; NCS; special effects.
By Aluprof to Qualanod standard, 25 µm film thickness.
Polyester powder coated to Qualicoat or Qualideco standards (including 'seaside' standard).
Up to 25 years
Polyester powder coating finish. Consult manufacturer for details of marine and industrial environments.
L10/25 Aluminium windows
L10/330 Aluminium windows
Non-fire and/ or smoke rated windows to EN 14351-1 and BS 4873; Fire and/ or smoke rated opening windows to BS EN 14351-1, BS EN 16034 and BS 4873
Dependent on smoke vent option specified below.
CE marked; Q-Mark; ITB - EPD Certification; Qualicoat/ Qualanod/ Qualideco; Secured by Design; UL Mark.
Qualicoat/ Qualanod/ Qualideco dependent on finish specified.
Dimensions and configurations
Add dimensions and/ or drawing references as required.
Tilt & turn (open in).
Tilt & slide (open in).
Bottom hung (open in).
Side hung (open in).
Top hung (open out).
Side hung (open out).
Bottom hung (open out).
To EN 1026: 2001, EN 12207: 2001, up to class 4.
To BS EN 1027: 2001, EN 12208: 2001, class E1800.
Resistance to wind load
To BS EN 12211: 2001, EN 12210: 2001, class E2400.
Operation and strength characteristics
Acoustic performance rating
Up to 47 (-2,-6) dB Rw.
Whole window U-value
Aluprof K Range suitable for the project.
Consult manufacturer for details and insert requirements.
Finish as delivered
Specify exterior and interior coatings below.
Specify exterior and interior colours below.
Ventilators by others.
Glazing or infill
Relevant parts of BS EN 1279.
Insert requirement, 23–62 mm (Opening); 15–53.5 mm (Fixed).
RAL colour to match frame.
Specify if interior and exterior values differ.
Teleflex winding gear.
Curtain wall adaptor.
See Installation for details.
Aluprof MB-70 Window
Environmental Product Declaration (EPD)
Cradle to Cradle.
The MB-70 window system specified above shall be fabricated and installed by Aluprof approved companies only, in complete accordance with the information and guidance distributed by Aluprof UK Ltd.
Country of material origin
Country of product manufacture
United Kingdom/ Poland.
Aluprof MB-104 Passive Aero Windows
Aluprof MB-104 Passive SI Windows
MB-59S and MB-59S HI Windows
MB-59S Casement And MB-59S Casement HI Windows
MB-59S Pivot And Pivot HI Windows
MB-60 US And MB-60 US HI Windows
MB-60, MB-60E, MB-60 HI, MB-60 Industrial And MB-60 Industrial HI Windows
MB-86 (ST, SI and AERO variants) Thermally Broken Window System
MB-86 US (ST, SI and AERO variants) Concealed Window System