Aluminium Structural RoofDek

Third party certifications:

BSI Kitemark
Certificate type
QA Certificate
Certificate type

Aluminium profiled roof decking.

Jump to:

+44 (0) 1244 892434 www.tatasteelconstruction.com

Application

Suitable for all roofing types.

Description

Aluminium profiled roof decking, developed to optimize the designer's needs for efficiency, aesthetics and structural performance alongside high strength and span capability.

RoofDek trapezoidal profiles D35 to D60:

Self-curving, within defined radius limits, down to 40 m (see technical literature for further details).

Can be supplied crimp curved down to 400 mm radius. Maximum 5 m length, with a minimum straight 200 mm lead in and lead out legs.

Maximum cantilevers assume 0.9 kN point load on the end, with the adjacent span being the single span as shown in the load/span table separately. The end of the cantilever must be stiffened with an angle flashing.

RoofDek trapezoidal profiles D100 to D159:

Sheet lengths in excess of 12 m are not practical for installation on-site and may also be subject to delivery restrictions. Extended end laps can be used to create a double span whilst keeping the deck length to a minimum. If a deck length in excess of 12 m is required, consult the manufacturer.

Features and benefits:

Subject to satisfactory fixings, the decks will resist wind uplift to at least 1.50 kN/m² to a deflection limit of L/150.

Load/ span tables are calculated to Eurocode 9 and based on a combined imposed load of 1.50 kN/m², a construction line load of 1.5 kN/m and a deflection limit of L/200. The factor of safety used is 1.5 for live load and 1.35 for dead load.

Loss Prevention Certification Board (LPCB) LPS 1181-1 approved.

CE marked (2273-CPR-0036).

Applications:

Suitable for all roofing types.

General information

Material	0.90 mm aluminium D35, D46, D60 and D100. 1.20 mm aluminium D35, D46, D60, D100 and D137. 1.50 mm aluminium D137 and D159.
Finish	Mill Polyvinylidene difluoride (PvDF) Stucco
Uniclass 2015	Pr_25_71_51_03 Aluminium profiled sheetsPrimary
CAWS	E60/140 Precast floor plate

Specification data - Aluminium profiled sheets

Product Reference	Aluminium Structural RoofDek
Profile	D35 900 mm cover width. 150 mm pitch. Span range: 1.5–2.3 m. D46 900 mm cover width. 225 mm pitch. Span range: 1.8–2.7 m. D60 800 mm cover width. 200 mm pitch. Span range: 2.3–3.4 m. D100 700 mm cover width. 233.3 mm pitch. Span range: 3.2–4.9 m. D137 930 mm cover width. 310 mm pitch. Span range: 4.1–5.0 m. D159 750 mm cover width. 250 mm pitch. Span range: 5.2–7.0 m.
Span	As drawing Insert details.
Material	0.90 mm aluminium D35, D46, D60 and D100. 1.20 mm aluminium D35, D46, D60, D100 and D137. 1.50 mm aluminium D137 and D159.
Finish	Mill Polyvinylidene difluoride (PvDF) Stucco
Additional requirements	None Factory crimp curving, 0.40 m radius Optionally available for D35 and D46.

Standard product features

Material:

Aluminium alloy to BS EN 485-1/2/3/4:1995. Coated grade 3004 H44. Mill and stucco - grade 3005 H27. Consult manufacturer for the availability of types of coating or finish which depends on profile and other factors.

Depth of deck:

The profile reference indicates the depth of the deck, e.g. D100 = 100 mm deep.

Fire performance:

Surface spread of flame: Class O.

Reaction to fire performance: Dependent upon pre-finished steel product up to A1 rating to BS EN 13501-1 (considered non-combustible).

Ratings for exposure and penetration to fire, dependent on build-up above deck.

Technical characteristics:

Varies depending on material and thickness, consult technical literature for weight, single and double span data, plus minimum self-curve and cantilever information.

Literature