NBS Source
List your products
Aluminium Sliding Door CP 130 Concept Patio System
Description

CP 130 Concept Patio® System is a highly insulated slide and lift-slide system, which meets the highest requirements with regard to insulation, stability and safety.

A complete range of solutions for all types of sliding patio door, it can be combined with CS 77 windows and doors, and Ventalis ventilation units.

Features and benefits:

  • Single, double and triple track, straight slide or lift and slide variants.
  • Monorail option with beaded fixing light for minimal appearance.
  • Low threshold and fly-away corner options.
  • Accommodates sash weights of up to 300 kg.
  • Drained and ventilated glazing with EPDM synthetic rubber gaskets.
  • Choose from a full range of polyester powder coat colours and anodized finishes.
  • Dual colour available offering a different colour inside and out.
  • Weather stripped profiles with polyamide thermal breaks.
  • High insulation variant available.
  • 10 year systems guarantee provided as standard.
  • Meets the very stringent requirements to be awarded the Secured By Design accreditation.
  • CAD and BIM details available on request.

Performance:

  • Air permeability: Up to 600 Pa (class 4).
  • Wind load resistance: Up to 1200 Pa (class 3).
  • Water tightness: Up to 600 Pa (class 9A)
  • Acoustic performance: Rw (C;Ctr) = 34 (-1;-4) dB/ 39 (-1;-3) dB, depending on the glazing type.

Please refer to Reynaers product CE Passport certificates for clarification

Thermal insulation (to EN 10077-2:2012):

  • Double glazing: 1.8 W/m²K (Ud value depending on the frame/ vent combination and glass unit specification).
  • Triple glazing: 1.4 W/m²K (Ud value depending on the frame/ vent combination and glass unit specification).

Security:

PAS24:2012 (UK Secured By Design Standard) and RC2/ WK2 (European standard EN(V)1627–EN(V)1630 (windows).

Fixing:

  • Fixings must ensure the window is retained securely within the opening without damage or distortion to the window frame.
  • Generally, fasteners should be positioned 150 mm from each corner and each mullion/ transom, and at centres not exceeding 600 mm.

General information

Size

Refer to drawings or schedule.

Finish

Anodized

Polyester powder coated

Insert requirement.

Uniclass 2015

Pr_30_59_24_80 Sliding door and partition setsPrimary

CAWS

L20/520 Sliding doors

L20/60 Doors

Specification data - Sliding door and partition sets

Product Reference

Aluminium CP 130 Concept Patio

Aluminium CP 130-HI Concept Patio High

Aluminium CP 130-LS Concept Patio Lift and Slide

Aluminium CP 130-LS/HI Concept Patio Lift and Slide High

Configuration

Fixed

Monorail

Insert requirements: single or bi-parting sliding sash with beaded fix light for minimal appearance.

2-rail

Insert requirements: one or two sliding sash combinations or bi-parting sliding sash.

3-rail

Insert requirements: two or three sliding sash combinations.

Size

Refer to drawings or schedule.

Finish

Anodized

Polyester powder coated

Insert requirement.

Colour

-

External

Insert requirement.

Internal

Insert requirement.

Glazing details

Insert details of glazing unit including, spacer type and dimension, glass type (emissivity, safety, solar, g value and energy factors) and thickness.

Ironmongery

-

Type

Horizon handles

Orchid handles

Shield handles

Standard handles

Colour

Insert requirement.

Accessories

None

Remote operation

Ventalis trickle ventilator

Window restrictor

Standard product features

Reynaers frame and components:

  • Aluminium profiles shall be extruded from EN AW-6060 (AlMgSi0.5 F22) aluminium alloy to comply with EN 573 – parts 3 and 4.
  • Designed and manufactured to comply with BS 4873.
  • Outer frame members shall be 130 mm front to back and square cut. All corner joints to be assembled with screwed corner joints and glued. All joints shall be sealed during fabrication against water entry.
  • Reynaers profiles are insulated with glass fibre reinforced polyamide strips, separating the internal and external faces, mechanically jointed and glued to form a single compound profile.
  • Dry glazed to accommodate a wide range of single, double and triple glazing units with internal clip-in aluminium glazing beads.
  • Weather-stripping to be EPDM extruded synthetic rubber gaskets to DIN 7863 and ISO 3934, set in undercut grooves in the frame and vent.
  • The Reynaers systems carry CE – Marking fully compliant with the EU Construction Products Directive (CPD) to the relevant product standard BS EN 14351-1 for windows and doors and BS EN 13830 for curtain walls.
  • Manufactured and supplied under the requirements of ISO 14001, the internationally accepted standard that outlines an effective environmental management system.
  • Manufactured and supplied under a quality system certified to BS EN ISO 9001: 2000.
  • Reynaers Aluminium guarantees that the Reynaers Aluminium systems meet the technical specifications and standards of the country and the product in question. The current processing and maintenance regulations mentioned in the Reynaers Aluminium catalogues determine the extent of this 10 year guarantee (five year guarantee for wearing parts).

Product Options

Product reference:

  • Aluminium CP 130 Concept Patio: straight sliding door system.
  • Aluminium CP 130-HI Concept Patio High: thermally enhanced straight sliding door system.
  • Aluminium CP 130-LS Concept Patio Lift and Slide: lift and slide sliding door for improved operation.
  • Aluminium CP 130-LS/HI Concept Patio Lift and Slide High: thermally enhanced lift and slide sliding door for improved operation.

Ironmongery:

- Horizon handles:

Available anodized, or powder coated in one of 250+ RAL colours.

Accessories:

- Ventalis trickle ventilator:

A controllable ventilation system with a self-regulating airflow. The patented self-regulating units automatically open and close the air inlet when wind pressure increases or decreases, keeping the incoming airflow constant. Acoustic option available to 34/43 Db (Windows and Doors), 36/45 Db (Sliding Doors).

Consult manufacturer for ironmongery recommendations and details.

Glazing:

  • 4-43 mm single, double or triple glazing options. Contact the glass supplier for details of the glazing unit including, spacer type and dimension, glass type (emissivity, safety, solar, g value and energy factors), thickness and weight.
  • Glass to be set against extruded EPDM rubber gaskets retained in undercut grooves within the aluminium profile and clip-in glazing beads.

Finish:

  • Profiles powder coated in a range of RAL or ‘Coatex’ colours to APA Qualicoat standard or BS EN 12206-1:2004.
  • Anodized in satin or bronze colours to EWAA/ EURAS-Qualanod standard or BS 3987:1991.
  • Profiles can be finished with different internal and external colours, powder coated or anodized.

Consult manufacturer and insert requirements.

Similar products from Reynaers Aluminium