AluK SL50 Capped Curtain Walling System
QA Certificate
Certificate type
Capped 50 mm curtain walling system.
Capped 50 mm curtain walling system.
Features and benefits:
- 50 mm sightlines.
- Variety of face cap options.
- Eleven mullion and nine transom options.
- Mullion or compartmental drainage options.
- Glazing range from 6–42 mm.
- Fully integrates with AluK window and door systems.
- Certified in accordance with CWCT Sequence 'B' test methodology.
- Aluminium profiles are extruded in accordance with BS EN 12020, and are manufactured from grade 6060/6063 T6 aluminium.
| Uniclass 2015 | |
| CAWS | H11/110 Curtain walling |
| Product Reference | AluK SL50 Capped Curtain Walling System |
| Transom/ mullion | Insert requirement from 'Options' below. |
| Pressure plate/ cap | Insert requirement from 'Options' below. |
| Vent | K791Sash for SG vent. K792Sash for SG vent. |
| Glazing | Glass panels6–42 mm glass look-a-like panels, insert requirements. Glazing6–42 mm insulating glass units, insert requirements. Infill panels6–42 mm insulated sandwich panels, insert requirements. |
| Finish | - |
| Exterior | - |
| Type | Anodized to a minimum 15 micrometres thicknessPolyester powder coated to a minimum 60 micrometres thicknessPolyester powder coated to a minimum 60 micrometres thickness with marine environment guarantee |
| Texture | Not applicableFor anodized. High glossMattSemi-glossTexturedTextured metallic |
| Colour | Insert RAL colour requirement or type 'Not applicable' for anodized. |
| Interior | - |
| Type | Anodized to a minimum 15 micrometres thicknessPolyester powder coated to a minimum 60 micrometres thicknessPolyester powder coated to a minimum 60 micrometres thickness with marine environment guaranteeAs exterior |
| Texture | Not applicableFor anodized. High glossMattSemi-glossTexturedTextured metallicAs exterior |
| Colour | Insert RAL colour requirement, type 'As exterior' or 'Not applicable' for anodized. |
| Accessories | NoneK781Glazing adaptor up to 15°. K782Glazing adaptor up to 23°. K783Glazing adaptor up to 30°. K784Glazing adaptor up to 38°. K785Glazing adaptor up to 45°. K828Gasket extender 15 mm. K894Gasket extender 6 mm. |
| Standard product features | Outer frame: K794 - SG vent outer frame. Bead: Square. Recommended weight limits (maximum):
Performance:
|
| Product Options | Recommended size limits (maximum): Consult AluK (GB) Ltd for details. Transom/ mullion:
Pressure plate/ cap:
Glazing: - Glass panels: 6–42 mm glass look-a-like panels incorporating two panes of minimum 6 mm-thick glass, with a 16 mm argon gas filled cavity and ceramic painted internal face with foil backed insulation to achieve a maximum 0.35 W/m²K centre pane. Exposed internal faces of insulation incorporate an internal polyester powder coated aluminium tray backing. - Glazing: 6–42 mm insulating glass units incorporating a clear low emissivity inner pane and a clear outer pane with an argon gas filled cavity and 'warm edge' spacer bar to achieve a maximum centre pane U-value of 1.0 W/m²K. All glass within 800 mm from FFL should be toughened or laminated (within 1500 mm from FFL if within 300 mm of a door). - Infill panels: 6–42 mm insulated sandwich panels incorporating two sheets of a minimum 2 mm-thick polyester powder coated aluminium sheet to match framing and minimum 24 mm non-combustible foam insulation core. Finish:
|
- CWCT : Sequence 'B'