AluK F82 Thermally Broken Sliding Folding Door System

Frame depth:

82 mm.

Bead:

Square.

Recommended weight limits (maximum):

Individual panel weight not to exceed 150 kg.

Performance:

• Air permeability rating: Class 4 (600 Pa).

• Water tightness rating: Open in: Class 5A (200 Pa); open out: E900 (900 Pa).

• Wind resistance: Class B3 (1200 Pa).

Recommended size limits (maximum):

• With traffic door - maximum panel size (w x h): 1200 x 2600 mm.

• Without traffic door - maximum panel size (w x h): 1200 x 3000 mm.

Outer frame:

Compatible with a range of ancillary profiles including frame extenders, corner posts, couplers and sills.

Configuration:

Panels can be stacked inside or outside of the room, to the left, right or split to stack on both sides. Door sets can be manufactured to replace entire walls to maximize the opening space. Consult AluK (GB) Ltd for details.

Available configurations:

• 2-0-2 - Two panels/ zero sliding LH/ two sliding RH - without traffic door.

• 2-2-0 - Two panels/ two sliding LH/ zero sliding RH - without traffic door.

• 3-0-3 - Three panels/ zero sliding LH/ three sliding RH - with traffic door.

• 3-1-2 - Three panels/ one sliding LH/ two sliding RH - with traffic door.

• 3-2-1 - Three panels/ two sliding LH/ one sliding RH - with traffic door.

• 3-3-0 - Three panels/ three sliding LH/ zero sliding RH - with traffic door.

• 4-0-4 - Four panels/ zero sliding LH/ four sliding RH - without traffic door.

• 4-1-3 - Four panels/ one sliding LH/ three sliding RH - with traffic door.

• 4-2-2 - Four panels/ two sliding LH/ two sliding RH - without traffic door.

• 4-3-1 - Four panels/ three sliding LH/ one sliding RH - with traffic door.

• 4-4-0 - Four panels/ four sliding LH/ zero sliding RH - without traffic door.

• 5-0-5 - Five panels/ zero sliding LH/ five sliding RH - with traffic door.

• 5-1-4 - Five panels/ one sliding LH/ four sliding RH - with traffic door.

• 5-2-3 - Five panels/ two sliding LH/ three sliding RH - with traffic door.

• 5-3-2 - Five panels/ three sliding LH/ two sliding RH - with traffic door.

• 5-4-1 - Five panels/ four sliding LH/ one sliding RH - with traffic door.

• 5-5-0 - Five panels/ five sliding LH/ zero sliding RH - with traffic door.

• 6-0-6 - Six panels/ zero sliding LH/ six sliding RH - without traffic door.

• 6-1-5 - Six panels/ one sliding LH/ five sliding RH - with traffic door.

• 6-2-4 - Six panels/ two sliding LH/ four sliding RH - with traffic door.

• 6-3-3 - Six panels/ three sliding LH/ three sliding RH - with traffic door.

• 6-4-2 - Six panels/ four sliding LH/ two sliding RH - without traffic door.

• 6-5-1 - Six panels/ five sliding LH/ one sliding RH - with traffic door.

• 6-6-0 - Six panels/ six sliding LH/ zero sliding RH - without traffic door.

Glazing:

- Glass panels:

28–44 mm glass look-a-like panels incorporating two panes of minimum 6 mm- thick glass, with a 16 mm argon gas filled cavity and ceramic painted internal face with foil backed insulation to achieve a maximum 0.35 W/m²K centre pane. Exposed internal faces of insulation incorporate an internal polyester powder coated aluminium tray backing.

- Glazing:

28–44 mm insulating glass units incorporating a clear low emissivity inner pane and a clear outer pane with an argon gas filled cavity and 'warm edge' spacer bar to achieve a maximum centre pane U-value of 1.0 W/m²K. All glass within 800 mm from FFL should be toughened or laminated (within 1500 mm from FFL if within 300 mm of a door).

- Infill panels:

28–44 mm insulated sandwich panels incorporating two sheets of a minimum 2 mm- thick polyester powder coated aluminium sheet to match framing and minimum 24 mm non-combustible foam insulation core.

Finish:

• A variety of powder coated colours are available in accordance with BS 6496 and BS EN 12206-1:2004. Powder coating is applied to a Qualicoat standard, utilizing an inline flash anodizing pre-treatment process, with the polyester powder coating applied within 30 minutes of the flash anodizing process to ensure suitable adhesion.

• Doors can be dual coloured, textured or have an anodized finish.

Ironmongery:

High security hinges and locking mechanisms as standard with shootbolts top and bottom of the interlocks for enhanced security. Full range of suited hardware available.