NBS Source
I'm a manufacturer
Compare variants


Cavity and shear wall tie applications.


The ACS 3000 Range Tie is a multi purpose frame cramp designed in accordance with the requirements of BS EN 845-1. The tie is designed to allow a masonry panel to be tied back to a range of structures/substrates meaning one tie can fulfil a range of applications on site. The advanced punched and pressed profile of the tie means that it is capable of withstanding high loads as a result of its increased sectional properties.

The 3000 Range Tie also has the added capability to be used as a movement tie, designed to tie two panels of masonry together at a vertical movement joint. The tie provides lateral resistance to wind loading whilst allowing expansion and contraction of the masonry panel to prevent cracking. Through the use of an ACS debonding sleeve, it is designed to allow in axis movement of up to +/- 10mm.

The tie’s formed section and the integrated drip features act to prevent water from crossing the cavity. The minimum mortar joint thickness for which this tie is intended for use is 10mm.

The ACS 3000 Range Tie is available in Grades 304 (BS EN 1.4301) and Grade 316 (BS EN 1.4401) austenitic stainless steel.

Features and benefits:

  • Multi-purpose frame cramp.
  • Debondable.
  • BS EN 845-1 compliant.
  • Structure – masonry.
  • Austenitic Stainless Steel 1.4301 (304) grade.
  • 0 – 187.5 mm cavity.
  • UKCA / CE+UKNI marked
  • Lucideon tested.
  • Meets the requirement of the NHBC technical specification.

Consult ACS for recommended substrate fixings.

General information






Stainless steel


75 mm

100 mm

125 mm

150 mm

175 mm

Show more


Pr_20_85_84_19 Cavity wall tiesPrimary
Pr_20_85_84_73 Shear wall ties


F30/218 Shear wall ties

F30/24 Cavity wall ties

F30/214 Cavity wall ties

Specification data - Cavity wall ties


To BS EN 845-1.


Austenitic stainless steel, 1.4301 (304) grade.


75 mm.

Guidance for specification option:

Nominal cavity width: 0 – 20 mm.

Additional requirements


Mortar joint thickness (minimum)

10 mm.

Resistance to water crossing cavity


Compressive load capacity

1160 N.

Tensile load capacity

790 N.

Dynamic stiffness

Type B.

Guidance for specification option:

Tests performed at Lucideon proved that the 3000 range tie has a measured dynamic stiffness of 8.8 MN/m³ in a 100 mm cavity and therefore is classed as a Type B tie in line with guidance of Approved Document E of the Building Regulations.


ACS Multi-PurposeDe-bonding Sleeve.

ACS Multi-PurposeInsulation Retaining Clip.

ACS Neoprene Isolation Washers.


940-980 N.


0–20 mm.

Sustainability data

Contains Red List materials


Country of product manufacture

United Kingdom


Fully recyclable

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

90 %

BIM objects


NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version



ACS 3000 Range Tie

ACS 3000 Range Tie

Similar products from ACS Stainless Steel Fixings Ltd

ACS 2000 Range Tie

ACS 2000 Range Tie