ACO HP Refurbishment outlet

Name: ACO HP Refurbishment outlet
Brand: 9RzvTqQPyoKjNogyKyD3Vu
SKU: kTvj57xMRQH9Eny2cZtJ77

ACO Technologies plc

Outlet designed to fit inside existing outlet and pipework of an existing flat roof being upgraded.

Jump to:

+44 (0)1462 816666 www.aco.co.uk

Description

When an existing flat roof is being upgraded, the refurbishment outlet is designed to fit inside the existing outlet and pipework with minimal disruption without the need to remove the original outlet. The aluminium body incorporates a wide fixing flange to enhance the bond with roofing membranes and does not suffer the distortion effects during the application of torched membranes. Outlets are supplied with a flexible finned pipe seal ensuring a watertight connection to existing pipework. The ease of use and minimal disruption to the existing rainwater system makes this an extremely cost effective solution when upgrading flat roofs.

Refurbishment outlets are designed to fit the following range of existing pipework systems:

3HP-RFO: 71.5–78.5 mm internal pipe diameter.

4HP-RFO: 97.0–104.0 mm internal pipe diameter.

General information

Material

[Material, Gun-metal to BS 1400 available to special order. Gun-metal should be specified for use in conjunction with copper or lead-clad roofs or when connected to copper pipes]

LM6 grade aluminium alloy to BS 1490

Specification data

Product Reference	HP Refurbishment outlet
Type	3HP-RFO 75 mm nominal bore, dome grating. 4HP-RFO 100 mm nominal bore, dome grating. Contractor's choice As drawing ___
Outlet	Type and direction to suit pipework with suitable adaptors and connections
Accessories	2/3DS deck support Outlet support plate to metal decks for code 3 (75 mm) outlets. 4/6DS deck support Outlet support plate to metal decks for code 4 (100 mm) outlets. 2/3RR raising ring 128 mm high raising ring for code 3 (75 mm) circular outlets. 4/6RR raising ring 128 mm high raising ring for code 4 (100 mm) circular outlets. 2/3TG terrace grate Terrace grate for use with raising ring to code 3 (75 mm) circular outlets. 4/6TG terrace grate Terrace grate for use with raising ring to code 4 (100 mm) circular outlets. Contractor's choice As drawing ___

Standard product features

Material:

LM6 grade aluminium alloy to BS 1490.

Secure gratings:

Gratings are secured with stainless steel fixings that require either a socket wrench or spanner for removal and replacement.

Flow rate (35 mm head over outlet body):

3HP-RFO: 5.0 L/s.

4HP-RFO: 5.0 L/s.

Area drained (rainfall intensity 75 mm/hr):

3HP-RFO: 240 m².

4HP-RFO: 240 m².

Weight:

3HP-RFO: 5.00 kg.

4HP-RFO: 5.10 kg.

Product Options

Material:

Gun-metal to BS 1400 available to special order. Gun-metal should be specified for use in conjunction with copper or lead-clad roofs or when connected to copper pipes.

Accessories:

Deck supports are used where ACO Building Drainage HP rainwater outlets are installed in metal deck roof constructions, providing a stable and secure interface between the outlet and roof. Deck supports are manufactured from 1.5 mm steel sheet and finished primed in a red oxide paint finish. Suitable for all types of metal deck roofing.

Raising rings are used where it is necessary to raise the level of the dome grating above the outlet body, for example an inverted roof construction. With the exception of the balcony outlets (HP-BO) and gully outlets (HP-GO), raising rings will only accept dome gratings or terrace grates as the raising rings will not accept the standard flat grates.

Terrace grates are designed for installations with terraced paving slabs or block paviors. Terrace grates can only be used with circular raising rings. A slotted fixing detail allows 90° rotational movement to accommodate slab/ pavior patterns.