A1S Flameshield Fire Shutter 240 JM - Fire Shutter (With External Motor)

The fire shutters are manufactured and produced in accordance with the parameters and technical aspects indicated within the specifications, which were submitted to the Warrington Fire Research Establishment. The shutters are constructed to Fire Testing in accordance with BS EN 1634-1 and full compliance with the new Fire Standard BS EN 16034:2014. This product can be fitted to a rigid structure and is CE marked.

Features and benefits:

• Warrington Element Fire Research Centre No. 421378. Masonry/Brickwork/Concrete Up to 240 minutes.
• Extended Application under BS EN 15269-10: 2011 WF 421375.
• Certificate of Constancy of Performance - 1121-CPR-RA5009.
• CE marked to BS EN 16034.
• CE marked to the machinery directive.
• Decorative RAL finishes available.
• External type motor.

Endplates:

The endplates are fixed to a steel fixing angle which spans the full height of the shutter, which in turn is fixed back to the wall construction. Accordingly, the angles are slotted for expansion with an anchor point located at the bottom of the angle.

Guides:

Constructed from minimum 50 mm straight channel galvanized guide mounted on 75 x 50 mm mild steel angle (minimum). For shutters of increased width compared with the tested to provide for expansion the depth of each guide rail shall be increased by 5 mm for every 1 m increase in width.

Hood:

Formed from 20 swg steel sheet, with the top leg slotted for expansion. Dependent on the fire rating of the shutter (one hour only) and the size of the opening (hood support brackets are no longer able to be used to reduce the barrel diameter). The EXAP provide for the use of a canopy (specific appropriate restrictions apply).

Release mechanism:

Fusible Link/Manual reset solenoid/Auto reset Solenoid Alternatively, Audio Visuals are available, again to be linked to the fire alarm, this unit offers the facility of a time delay, which flashes and sounds to warn that the fire shutter is closing.