A1000 Wheelchair Incline Stair Lift


Wheelchair incline stair lift that can be wall or stanchion post mounted to almost any staircase. With the standard or a special size platform the stair lift can be adapted to fit the majority of applications which include stairs with mid landings and the requirement for the unit to travel around a corner or bend.

With simple and easy to use push buttons and joystick, the stair lift is a reliable and cost effective solution to restricted access via an existing stair case. To operate the stair lift unit, the wheelchair users would press the unfold button on the remote control station and the platform will then automatically unfold ready to be used. The wheelchair users can then move themselves onto the platform.

Features and benefits:

  • Wall or stanchion post mounted.
  • Automatic fold and unfold facility.
  • Single phase, 13 A power requirement.
  • Suitable for internal or external applications.
  • Capable of accommodating stairs with mid landings or curves/ corners on the staircase.

General information


Platform side panel: RAL 9007

Floor and ramp covering: Non-slip flooring, RAL 9007

Uniclass 2015

Pr_65_80_47_84 Step liftsPrimary


X13/110 Stairlift system

Specification data - Step lifts

Product Reference

A1000 Wheelchair Incline Stair Lift

Size (w x l)

800 x 1000 mm

800 x 1250 mm


Attendant control

Battery back-up emergency alarm

Battery back-up emergency lowering

Side access

Special painting to plastic side cover

Standard product features

Folded up width:

237 mm (350 mm when stanchion post mounted).


  • Platform side panel: RAL 9007.
  • Floor and ramp covering: Non-slip flooring, RAL 9007.


Through or adjacent entrance configuration.

Rated load:

300 kg.

Speed (approximate):

0.15 m/s.

Number of stops/ landings:



Wall or stanchion post mounted.


Left or right.


Rack and pinion with worm gear motor and brake.

Control logic:

Constant pressure controls.


  • Up, down and stop buttons on platform.
  • Call push buttons at each landing.
  • Landing controls surface mounted.
  • Comfortable and easily accessible push buttons.
  • Key switching provided for upper/lower call stations.

Power supply:

Automatic power driven travelling ramp/ wheelstop on platform.

Safety barriers:

Safety arms located behind the platform when folded.

Safety features:

  • Key control: Key switches provided on both landings.
  • Safety edges: Sensitive edges are provided for the highest possible safety.
  • Safety gear: Fall protection provided by speed governor and safety gear.

Power supply:

240 V, 50 Hz, 10 A supply with soft start and stop, 24 V control voltage.