Concrete floor polishing providing a smooth, matt surface with lower durability and no exposed aggregate.
Concrete floor polishing which consists of polishing steps only. This concept does not expose fine material, gravel or larger aggregates.
The concrete skin is polished without grinding it away, and the polished surface makes the floor easy to clean and more resistant to tyre marks from forklifts and dirt. The light reflection off the surface of the floor also provides a pleasant aesthetic
The floor is ground and polished according to a well-established and tested method, using planetary grinding machines, diamond tools and in accordance with Denholm's grinding guide. The floor receives a completely smooth and glossy surface. The concrete surface must be smooth with good surface treatment during casting. Irregularities in the concrete surface's colour and appearance are not removed by polishing.
A stain protection pore primer should be used.
Features and benefits:
400 Grit Finish - Low Gloss Effect
|Standard product features|
A1fl (fireproof/ non-combustible).
Electrostatic discharge (ESD) resistance:
Complies with the requirements of BS-EN 61340-5-1 and ANSI/ESD. Walking tests with ESD shoes give, in general, no or little static charge. The use of ESD shoes is recommended when handling electronics with maximum 100 V.
A floor polished in accordance with the 400 Grit Finish - Low Gloss Effect concept consists of pure concrete. In the process, only environmentally friendly impregnation and cleaning fluids are used, which means the floor doesn't present a hazard to health or the environment. The floor has a very long service life and high strength, which reduces the need for maintenance, and thus the environmental burden to an absolute minimum.
Consult manufacturer for information.