12501 Latch-Blocking PE
Verified by manufacturer 3 months ago
DIN
DIN
Catch lock with latch blocking.
Application
For use in public buildings, office buildings, banks, hospitals, hotels and upmarket residential buildings.
Description
Catch lock with latch blocking for doors with low-security demands (break-in), but with latch blocking, which are operated from the outside using a pull handle or knob. Opening is only possible by latch withdrawal using the key or an E-fitting. Exiting from the panic side is always possible using the panic function.
Features and benefits:
- Key-operated latch mortice lock with latch blocking and panic E function.
- Centred lock case.
- Operation from the outside via the cylinder (latch withdrawal) or electronic fitting.
- Quiet closing due to the comfort latch with dampened latch throw.
- Lever handle bearing with no backlash due to the two-part continuous clamp follower.
- Linear lever handle operation and holding up torque due to the new spring design.
- Reversible due to the reversible DIN L/R latch.
- Follower turning angle 32°.
General information
Color | Silver |
Finish | Matt |
Material | Stainless steel |
Length | 230 mm 235 mm 248 mm |
Height | 18 mm 20 mm 22 mm 24 mm |
Uniclass | |
CAWS | P21/24 Door locks P21/515 Door locks |
Specification data - Door latches
Standard | To EN 12209:2003+AC:2005, EN 1125 and EN 179. |
Classification grades (minimum) | |
Category of use | Grade 3. |
Durability | Grade M. |
Door mass and closing force | Grade 5. |
Suitability for use on fire-resisting and/ or smoke control doorset | Grade 1. |
Safety | Grade 0. |
Corrosion resistance and temperature | Grade F. |
Security and drill resistance | Grade 4. |
Key identification requirement | Grade 0. |
Latch or lock type | Mortice lock. |
Backset | 55 mm.65 mm.80 mm. |
Material and finish | Matt stainless steel faceplate.Manufacturer guidanceOther finishes on request. |
Cut-outs | RZW. PZW. |
Locks with follower | 9 mm. |
Forend | Radiussed, 20 x 235 mm. Radiussed, 24 x 235 mm. |