NBS Source
List your products
1100 Foam Seal

1100 Foam Seal

Inpro

The 1100 series foam seal for expansion joints provides a 100% watertight seal. This system is excellent for roof applications and installation under metal cover plates.

Jump to:
+44(0)7399586677 www.inprocorp.co.uk
Application

  • 1100 Series: Roof applications and for use underneath metal cover plate systems (floor to floor, wall to wall, floor to corner and wall to corner conditions).
  • 1200 and 1250 Series: For wall to wall and wall to corner conditions.

Description

Foam seals, which create a watertight, UV resistant, insulated seal. For use with expansion joint systems, which help to protect buildings from natural shifting and movement. Can be used in joint widths between 50–200 mm.

1100 Series:

The 1100 series foam seal provides a 100% watertight seal. This system is suitable for roof applications and installation under metal cover plates. Its ridged sides trap and pool epoxy, providing good adhesion to the joint surface and a water tight seal.

  • Can withstand high heat.
  • 100% watertight.
  • Allows for 50% tension, 50% compression, and 100% shear movement.
  • Manufactured from a nitrogen blown polyethylene material, which is more environmentally friendly than ethylene vinyl acetate (EVA) foam seals.
  • Available with an optional coating: the seal can be painted to match any wall colour using Sherwin-Williams® or Pantone® colour – consult manufacturer for details.

1200 Series:

The 1200 foam seal for vertical expansion joints is UV stable and highly resistant to ozone and chemical degradation. This open cell foam is constantly self-expanding, allowing system to maintain a watertight seal during rapid joint movement.

  • Capable of handling vertical and horizontal joint movement.
  • Pre-compressed, and equipped with peel and stick adhesive sides, making installation easy.
  • Installed with epoxy for joint widths 6 inches wide and greater.
  • Allows for up to 100% movement (±50%).

1250 Series:

The 1250 closed cell foam seal for vertical expansion joints is UV stable and highly resistant to ozone and chemical degradation.

  • Capable of handling vertical and horizontal joint movement.
  • Design makes installation easier and allows for better adhesion to the joint surface.
  • Composed of a durable, closed cell foam structure which has high compression, tension and shear stress.
  • Installed utilising colour-matching silicone.
  • Allows for up to 50% movement (±25%).

Applications:

  • 1100 Series: Roof applications and for use underneath metal cover plate systems (floor to floor, wall to wall, floor to corner and wall to corner conditions).
  • 1200 and 1250 Series: For wall to wall and wall to corner conditions.

General information

Uniclass 2015

Pr_35_90_87_27 Expanded polyethylene (PE) foam stripsPrimary

CAWS

F30/615 Movement joints without sealant

F30/78 Movement joints without sealant

H42/661 Sealant joints

Specification data - Expanded polyethylene (PE) foam strips

Product Reference

1100 Series

With ridged sides which trap and pool epoxy, providing superior adhesion to the joint surface.

1200 Series

Single, double and triple faced versions are available. For vertical applications only.

1250 Series

Can be permanently adhered to joint edge using epoxy or silicone. For vertical applications only.

Type

Consult manufacturer's literature for details and insert system code.

Seal colour

Aluminium Stone

Anodized Aluminium

Beige

Black

Charcoal Gray

Classic Bronze

Hartford Green

Limestone

Natural Stone

Precast

Red Rock

Sandstone

Tru White

Accessories/ Other requirements

Not required

Cover plate

For 1100 Series only. For join widths larger than 76 mm in horizontal applications.

Custom silicone

For NSF 61 approval. For 1200 Series only.

Fire barrier

Various options available, consult manufacturer and insert requirements.

Standard product features

Technical characteristics:

- 1100 Series (to ASTM D3575):

  • Nominal density (suffix W): 2 pcf (±0.3).
  • Compressive strength (suffix D): 9 psi (at 25%); 16 psi (at 50%).
  • Elongation at break (suffix T): 200% (±10%).
  • Tensile strength (suffix T): 125 psi (±12 psi).
  • Tear strength (suffix G): 17.5 pli (±3 pli).
  • Compression set (suffix B, after 22 hours, at 50%): 14% (at 24 hour recovery); 20% (at 2 hour recovery).
  • Water absorption (suffix L): <0.03 lb/ft².

- 1200 Series:

  • Nominal density: 10 pcf (160 kg/m³).
  • Thermal conductivity: 0.05 W/m·K.
  • Temperature stability: -40°C to 85°C.
  • Elongation at break (to ASTM 3574): 125% (±20%).
  • Tensile strength (to ASTM 3574): 21 psi (minimum).
  • Shear strength: 8 N/cm³ (minimum).
  • Compression set: 2.5% (maximum).

- 1250 Series:

  • Nominal density: 10 pcf (160 kg/m³).
  • Thermal conductivity (to ASTM C177): R-4.
  • Elongation at break (to ASTM D3575): 250%.
  • Tensile strength (to ASTM D3575): 120 psi.
  • Tear resistance (to ASTM D624): 21.5 lb/inch.
  • Compression set (suffix B, after 22 hours at 50%): 14% (at 24 hour recovery); 20% (at 2 hour recovery).
  • Water absorption (to ASTM D3575): <.02 lb/ft².

Product Options

Type:

Also available in larger sizes, consult manufacturer for details.

Seal colour:

Others are available, consult manufacturer for details.

Digital objects
PlatformCompatibleVersionCertified to
Revit
 Revit 2017 1 2.0
Download now from NBS National BIM Library
Similar products from Inpro

© 2020 NBS Enterprises Ltd. All rights reserved.