Metal lockers in a range of compartment configurations.
Metal lockers in a range of compartment configurations.
Features and benefits:
Material | Carbon steel, powder-coated |
Uniclass 2015 | |
CAWS | N10/220 Lockers |
Product Reference | Metal Lockers |
Type | One compartment, 1301Full length. Two compartments, 1302Compartment opening size: 810 mm-high (internal: 847 mm). Three compartments, 1303Compartment opening size: 525 mm-high (internal: 555 mm). Four compartments, 1304Compartment opening size: 390 mm-high (internal: 420 mm). Five compartments, 1305Compartment opening size: 306 mm-high (internal: 336 mm). Six compartments, 1306Compartment opening size: 250 mm-high (internal: 280 mm). |
Width/ depth | 300 x 300 mm300 x 450 mm380 x 380 mm380 x 450 mm450 x 450 mm |
Nesting | Single unitTwo units, rowThree units, row300 mm-wide units only. |
Colour | - |
Frame | Ice |
Door | AppleBlackCherryForestIceOrangePinkPurpleRockpoolRoyaleSkyeSmokeWhiteYellowRALInsert requirements. |
Locking | Latch lockStandard. Ten-disc tumbler cam lockStandard. Coin refund/ retainDigital combination lockFour-digit combination lock |
Accessories | - |
Three-point locking | RequiredAvailable for one compartment (full length) lockers only, and with latch lock or ten-disc tumbler cam locks only. Not required |
Numbering | Not requiredDiscsLabelPlate |
Perforations | RequiredNot required |
Stands/ seats | Not requiredStandsStands with adjustable feetStands with seatsStands with seats and adjustable feet |
Sloping top | Required1:3 gradient; recommended where user may leave items on top of lockers. Not required |
End panels | RequiredFor aesthetic appearance and to protect row ends. Not required |
Charging point | RequiredSingle unswitched 13 A socket (each compartment). Not required |
Standard product features | Height: 1775 mm. Material: Carbon steel, powder-coated. Construction: Spot welded and pop riveted.
|
Product Options | Nesting: Units are nested in groups during the manufacturing process. All lockers are holed in back and sides to enable them to be bolted together. Note: When preparing locker room layouts, allow approximately 4 mm extra for each nest for rivet heads at the sides of lockers in each row. Colour: Paint finish: Five-stage automatic degreasing and phosphating process to remove surface contamination for improved adhesion and humidity resistance. The powder is electrostatically applied prior to oven baking at the appropriate temperature. Additional cost applies for non-standard RAL colours. Locking:
Accessories: Additional costs apply; consult manufacturer for details. - Three-point locking: Espagnolette bolts provide effective and secure latching, allowing locking at three positions. Can be specified with either standard locking method. A range of other locking options are available; consult manufacturer for details. - Numbering:
- Perforations:
- Sloping top: Height increase at rear:
- Charging point: Contact manufacturer for further details. |