NBS Source
List your products

Xtratherm UK Ltd

+44 (0)371 2221033 www.xtratherm.com

Sort by:

Showing 1-36 of 36

Cavity Tray Channel

An insulated channel to allow for insulation continuity around stepped cavity trays at gable junctions.

CavityTherm CT/PIR

High performance composite board of enhanced PIR with a lambda value of 0.021 W/m·K, for full fill cavity wall applications.

Safe-R Rainscreen Board

SR/RS Rainscreen Board provides ultimate thermal performances in rainscreen applications. Safe-R is a superior performance phenolic insulation with a Euroclass B fire classification. It is faced with low emissivity foil facings on both sides and has a Lambda value as Low as 0.020 W/mK.

SR/RS has been tested to BS 8414 (Parts 1 and 2) in a number of compliant system specifications. For comprehensive guidance and copies of reports contact technical support.

For compliance with the latest Building Regulations and Standards in other jurisdictions, consult your system supplier and local building control authorities.

Xtratherm SR/RS is not suitable for use on high-rise buildings in England where; the building contains one or more dwellings, an institution or a room for residential purposes (excluding any room in a hostel, hotel or boarding house), student accommodation, care homes, sheltered housing, hospitals and dormitories in boarding schools, with a storey at least 18m above ground.

Safe-R SR/CW

Partial fill cavity insulation for traditional masonry walls.

Safe-R SR/FB

Framing board designed for use with steel or timber frame applications up to 18 m in height.

Safe-R SR/PR

Pitched roof board for use on sloped roofs (ventilated, hybrid or warm) providing efficient U-values with minimal intrusion into valuable living space.

Safe-R SR/ST

Soffit board providing effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings.

Safe-R SR/STP

Provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings.

Safe-R SR/TB

Composite insulated panel of Xtratherm phenolic insulation core with a glass tissue facing bonded to 12.5 mm tapered edge plasterboard for internal applications

Safe-R SR/TB-MF

Composite insulated panel of Xtratherm phenolic insulation core with a composite foil facing bonded to 12.5 mm tapered edge plasterboard for internal walls, sloped roofs and ceilings.

Safe-R SR/UF

High performance rigid phenolic insulation with low emissivity aluminium facings both sides and has a thermal conductivity as low as 0.020 W/m·K, delivering good U-values in floors.

Thin-R Aluminium Faced Tapered Insulation

Xtratherm TR/ALU is a high performance polyisocyanurate (PIR) tapered roof insulation with vapour tight aluminium foil facings suitable for use with single ply membranes. TR/ALU is part of the comprehensive range of Xtratherm’s high performance tapered roof boards providing total solutions for tapered roof projects.

Thin-R Bituminous Faced Tapered Insulation

Xtratherm TR/BGM is a high performance polyisocyanurate (PIR) tapered roof insulation with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the under side (TR/BGM boards are not reversible).

TR/BGM is suitable for use below most bitumen based partially bonded built up roofing systems. Part of Xtratherm’s comprehensive range of high performance tapered roof boards providing total solutions for tapered roof projects.

Thin-R Mineral Glass Faced Tapered Insulation

Insulation for single ply fully adhered/ partially bonded built-up felt systems.

Xtratherm TR/MG is a high performance polyisocyanurate (PIR) with mineral coated glass facers suitable for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.

Thin-R FR/ALU

Insulation for mechanically fixed single ply waterproofing systems.

Thin-R FR/BGM

Insulation for partially bonded, torched-on, built-up bituminous felt systems.

Thin-R FR/MG

Insulation for single ply fully adhered /partially bonded built-up felt systems.

Thin-R FR/TP

Thermal ply high performance PIR and plywood composite for flat roofs.

Thin-R Hyfloor Floor Insulation

Polyisocyanurate (PIR) tongue and groove insulation for partial fill cavity walls.

The floor in any building is an area of considerable downward heat loss when not properly insulated. Xtratherm has developed Thin-R Hyfloor XT/HYF (T&G) engineered tongue and grooved floor insulation as the answer to achieve lower U-values in a practical and robust manner.

XT/HYF (T&G) has a superior thickness to performance ratio, allowing the lower targets required under Building Regulations to be achieved with minimum thickness.

Thin-R Partial Fill Cavity Wall Insulation

Insulation board object. The object has a number of parametric values for materials.

The XT/CW T&G Partial Fill Cavity Wall boards builds to a system thanks to its engineered tongue and grooved joints and preformed corner boards, ensuring insulation continuity and minimisation of thermal bridging. XT/CW T&G for use in traditional masonry walls, builds to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.

Thin-R XT/Close-R

Fully insulated cavity closers offering a cost effective solution for builders and specifiers for the closing of cavities around window and door openings, preventing cold bridging, damp penetration, air infiltration and condensation.

Thin-R XT/CW (T&G)

Partial fill cavity wall for use in traditional masonry walls, builds to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.

Thin-R XT/CWP (T&G)

Polyisocyanurate (PIR) tongue and groove insulation for partial fill cavity walls.

Thin-R XT/PR

Pitched roof board on sloped roofs (ventilated, hybrid or warm) providing efficient U-values with minimal intrusion into valuable living space.

Thin-R XT/SK

Polyisocyanurate (PIR) insulation for sarking warm roof construction.

Thin-R XT/TF

Polyisocyanurate (PIR) insulation for timber framed walls.

Thin-R XT/TL

Composite insulated panel of Xtratherm PIR insulation core with a composite kraft facing bonded to 12.5 mm tapered edge plasterboard for internal applications, fixed with proprietary adhesive bonding.

Thin-R XT/TL (MF)

Composite insulated panel of Xtratherm PIR insulation core with a composite foil facing bonded to 12.5 mm tapered edge plasterboard for internal walls, sloped roofs and ceilings.

Thin-R XT/UF

A rigid polyisocyanurate underfloor insulation for solid and suspended ground floors.

Thin-R XT/Walk-R

Loft decking board, composite of high performance polyisocyanurate (PIR) insulation with tough oriented-strand board (OSB) board that provides safe access into insulated roof spaces.

XtroLiner Partial Fill Cavity Wall Insulation

XO/CW T&G is an innovative partial fill wall insulation system incorporating robust facings, engineered jointing details, performed corners and a certified lambda of 0.021 W/mK.

This lower lambda improves U-Values and meets Zero Carbon standards, proving an excellent choice for passive and low energy builds. XO/CW (T&G) partial fill can achieve a passive U-Value of 0.15 W/m2K in a traditional cavity wall. Using XO/CW allows the residual cavity to be maintained, offering excellent protection against wind driven rain.

XtroLiner XO/FB

XtroLiner Framing Board XO/FB is designed for use in a wide range of construction including steel or timber frame applications up to 18 m in height.

XtroLiner XO/PR

High performance polyisocyanurate (PIR) insulation for ground supported floors and suspended floors.

XtroLiner XO/STP

High performance polyisocyanurate (PIR) insulation for soffit application.

XtroLiner XO/UF

Superior performance polyisocyanurate (PIR) insulation for solid and suspended floors.

Showing 1-36 of 36