NBS Source
List your products

Plastestrip Profiles

+44 (0)1726 74771 www.plastestrip.com

Sort by:

Showing 1-23 of 23

FastFrame - Horizontal rail system

FastFrame - Horizontal rails system is suited to narrow portrait façade panels that would otherwise require an excessive quantity of vertical rails to support.

FastFrame - Rainscreen mechanical secret fix system

FastFrame - Rainscreen mechanical secret fix system consists of a horizontal aluminium 'C rail' which is fixed to the base 'FastFrame - Vertical rail system'. Helping hand brackets can be mechanically fixed into most types of cladding panels in excess of 8mm thick.

FastFrame - Vertical rail system

FastFrame - Vertical adjustable rail system can be fixed back to most structural substructrures such as metal, timber, concrete and masonry. Helping hand brackets are universal for all substructures types and include an isolation pad to help reduce thermal bridging.

The system can be used to support most types of facade or soffit panel where panels are being riveted or adhesive fixed.

This system can also be used as a base system to accept proprietary carrier systems for specific panels, such as terracotta, brick slips, etc.

Support Rails

Aluminium rainscreen cladding support rails.

ThermaFrame - Rainscreen mechanical secret fix system

ThermaFrame - Rainscreen mechanical secret fix system consists of a horizontal aluminium 'C rail' which is fixed to the base 'ThermaFrame - Vertical rail system' which utilises helping hand brackets made from stainless steel.Brackets can be mechanically fixed into most types of cladding panels in excess of 8mm thick.

ThermaFrame - Vertical rail system

ThermaFrame Vertical adjustable rail system utilises helping hand brackets made from stainless steel.

Stainless is approx 8X less conductive than aluminium, which greatly contributes to improved U-values due to less cold bridging via the support brackets.

ThermaFrame can be fixed back to most structural substructrures such as metal, timber, concrete and masonry. Brackets are universal for all substructures types and include an isolation pad for further reduced thermal bridging.

The system can be used to support most types of facade or soffit panel where panels are being riveted or adhesive fixed.

This system can also be used as a base system to accept proprietary carrier systems for specific panels, such as terracotta, brick slips, etc.

ThermaFrame – FloorSpan

Adjustable aluminium and stainless rainscreen cladding FloorSpan system; panels can be riveted or adhesive-fixed.

Tophat & Z system

The omega & z system, also known as a top hat and z system, is a simple solution for mounting cladding panels on to any substrate. Top hats (or omega profiles) are used to support panel joints and the Z rails are used to support the intermediates across the panel.

Features and Benefits:

  • Gives an A1 fire rated alternative to timber battens
  • Cost effective
  • High strength
  • Easy to install
  • Fully calculated, warrantied and covered by our PI insurance

Showing 1-23 of 23