Franke Sissons Ltd

A floor standing bucket sink designed for use in cleaners rooms.

Large catering sink, 900 mm.

Manufactured from 1.2 mm thick grade 1.4301 (304) stainless steel polished to a satin finish.

Includes two tap holes behind each bowl, drilled at 180 mm centres. Single bowl sinks are suitable for either 13 mm pillar taps or mixer taps, whereas the double bowl sinks are only suitable for pillar taps.

Bowls are all supplied with 38 mm waste and standpipe strainer overflow. An earthing lug is fitted under the drainer. Each leg is fitted with an adjustable foot with a working height of 900 mm.

Large catering sink, 900 mm.

Manufactured from 1.2 mm thick grade 1.4301 (304) stainless steel polished to a satin finish.

Includes two tap holes behind each bowl, drilled at 180 mm centres. Single bowl sinks are suitable for either 13 mm pillar taps or mixer taps, whereas the double bowl sinks are only suitable for pillar taps.

Bowls are all supplied with 38 mm waste and standpipe strainer overflow. An earthing lug is fitted under the drainer. Each leg is fitted with an adjustable foot with a working height of 900 mm.

Large catering sink, 900 mm.

Manufactured from 1.2 mm thick grade 1.4301 (304) stainless steel polished to a satin finish.

Includes two tap holes behind each bowl, drilled at 180 mm centres. Single bowl sinks are suitable for either 13 mm pillar taps or mixer taps, whereas the double bowl sinks are only suitable for pillar taps.

Bowls are all supplied with 38 mm waste and standpipe strainer overflow. An earthing lug is fitted under the drainer. Each leg is fitted with an adjustable foot with a working height of 900 mm.

A smaller type catering sink, designed for use where space is limited – pub catering and fast food outlets. Taps and underframes available separately.

A smaller type catering sink, designed for use where space is limited – pub catering and fast food outlets. Taps and underframes available separately.

A smaller type catering sink, designed for use where space is limited – pub catering and fast food outlets. Taps and underframes available separately.

Large catering sink, 900 mm.

Manufactured from 1.2 mm thick grade 1.4301 (304) stainless steel polished to a satin finish.

Includes two tap holes behind each bowl, drilled at 180 mm centres. Single bowl sinks are suitable for either 13 mm pillar taps or mixer taps, whereas the double bowl sinks are only suitable for pillar taps.

Bowls are all supplied with 38 mm waste and standpipe strainer overflow. An earthing lug is fitted under the drainer. Each leg is fitted with an adjustable foot with a working height of 900 mm.

Large catering sink, 900 mm.

Manufactured from 1.2 mm thick grade 1.4301 (304) stainless steel polished to a satin finish.

Includes two tap holes behind each bowl, drilled at 180 mm centres. Single bowl sinks are suitable for either 13 mm pillar taps or mixer taps, whereas the double bowl sinks are only suitable for pillar taps.

Bowls are all supplied with 38 mm waste and standpipe strainer overflow. An earthing lug is fitted under the drainer. Each leg is fitted with an adjustable foot with a working height of 900 mm.

Designed for use in detention centres, high security areas, public toilets, railway stations, motorway service stations for exposed or concealed cistern applications.

Designed to be highly durable and water efficient and to withstand intensive use in busy environments, the semi-circular and circular washtroughs are particularly vandal resistant. Products are available for up to eight users with a choice of touch free infra-red controls or manually operated self-closing taps, designed to save water and energy with adjustable flow time. Both tap options are available with soap dispensers. Semi-circular troughs are for mounting up to a wall and for duct mounted or floor supply services. The large floor mounted base for the circular troughs provides good stability. Services are fed from below and can be accessed through a side panel which is fitted with tamper proof security screws. The use of a single water supply and waste has a significant cost saving compared to conventional washbasins which need water supplies and a waste for each basin. Delivered fully assembled. Junior height version also available.

Designed to be highly durable and water efficient and to withstand intensive use in busy environments, the semi-circular and circular washtroughs are particularly vandal resistant. Products are available for up to eight users with a choice of touch free infra-red controls or manually operated self-closing taps, designed to save water and energy with adjustable flow time. Both tap options are available with soap dispensers. Semi-circular troughs are for mounting up to a wall and for duct mounted or floor supply services. The large floor mounted base for the circular troughs provides good stability. Services are fed from below and can be accessed through a side panel which is fitted with tamper proof security screws. The use of a single water supply and waste has a significant cost saving compared to conventional washbasins which need water supplies and a waste for each basin. Delivered fully assembled. Junior height version also available.

Wall mounted cleaners sink manufactured from grade 1.4301 (304) stainless steel, material thickness 0.9 mm, with splash back, hinged grating, 38 mm BSP waste fitting and complete with integral wall brackets.

General purpose sink for wall mounting, stainless steel, surface satin finished, material thickness 1.5 mm, seamless welded bowl with dimensions 370x340x160 mm, rounded edges, 1 1/2" plug waste with plastic overflow pipe, drainage back left, 30 mm rear upstand, incl. stainless steel grid with rubber bumps, incl. stainless steel screws and dowels.

General purpose sink for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded bowl with dimensions 420x400x170 mm, rounded edges, 1 1/2" plug waste, drainage back right, 40 mm rear upstand, incl. stainless steel screws and dowels. With stainless steel hinged grating with rubber bumps.

Combination paper towel dispenser, soap dispenser and waste bin.

RODX601:

Paper towel, soap dispenser combination for wall mounting, stainless steel, surface satin finished, material thickness 0.8 mm, cylinder lock with Franke standard key, inspection windows on sides, paper towel dispenser with loading capacity 300–400 pieces of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 L soap tank, pull lever, including stainless steel screws and dowels.

RODX617:

Waste bin, paper towel, soap dispenser combination for wall mounting, stainless steel, surface satin finished, material thickness 0.8 mm, cylinder lock with Franke standard key, paper towel dispenser with loading capacity 300–400 pieces of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 L soap tank, push lever, waste bin with approximately 23 L capacity, including stainless steel screws and dowels.

Stratos surface mounted paper towel and soap dispenser unit.

Stratos paper towel and soap dispenser combination for recessed mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection windows on front, paper towel dispenser with loading capacity 300 - 400 pcs. of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 liter soap tank, push lever, incl. stainless steel screws and dowels.

Combination paper towel dispenser, soap dispenser and waste bin.

RODX601:

Paper towel, soap dispenser combination for wall mounting, stainless steel, surface satin finished, material thickness 0.8 mm, cylinder lock with Franke standard key, inspection windows on sides, paper towel dispenser with loading capacity 300–400 pieces of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 L soap tank, pull lever, including stainless steel screws and dowels.

RODX617:

Waste bin, paper towel, soap dispenser combination for wall mounting, stainless steel, surface satin finished, material thickness 0.8 mm, cylinder lock with Franke standard key, paper towel dispenser with loading capacity 300–400 pieces of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 L soap tank, push lever, waste bin with approximately 23 L capacity, including stainless steel screws and dowels.

Combination paper towel dispenser, soap dispenser and waste bin.

RODX601:

Paper towel, soap dispenser combination for wall mounting, stainless steel, surface satin finished, material thickness 0.8 mm, cylinder lock with Franke standard key, inspection windows on sides, paper towel dispenser with loading capacity 300–400 pieces of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 L soap tank, pull lever, including stainless steel screws and dowels.

RODX617:

Waste bin, paper towel, soap dispenser combination for wall mounting, stainless steel, surface satin finished, material thickness 0.8 mm, cylinder lock with Franke standard key, paper towel dispenser with loading capacity 300–400 pieces of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 L soap tank, push lever, waste bin with approximately 23 L capacity, including stainless steel screws and dowels.

Stratos paper towel dispenser and waste bin combination for recessed mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection windows on front, loading capacity 300 - 400 pcs. of paper depending on convolution, waste bin with approx. 22 liter capacity, integrated bag holder, incl. stainless steel screws and dowels.