Plasterboard Access Panels are designed for use as an access hatch, for application into plasterboard walls and ceilings from 8–32 mm thickness, including double boards. Will fit into the structural membrane of a joint-less plasterboard wall and ceiling system.

Designed for inspection purposes in areas where regular maintenance to services is required, rather than personnel access - consult manufacturer for details.

This panel is not fire, acoustic, or air pressure tested.

The FlipFix Easy Install Range of Plasterboard Access Panels are the panels to install on the market due to the unique FlipFix fitting device.

Fitting requires no battening out of the structural opening due to the unique FlipFix device which clamps the frame on to the rear of the plasterboard. It is manufactured with a beaded frame for tape and jointing/skim-coat plastering.

The panels door leaf is locked in place via a budget lock as standard other lock options are available upon request.

Features and benefits:

• Manufactured in the UK.
• Ten year guarantee.
• Manufactured with a beaded frame for tape and jointing/ skim-coat plastering.
• Easy to install, with no battening out of the structural opening required - the FlipFix device clamps directly up to the rear of the plasterboard, and the panel fits into a pre-cut hole (to be cut 5 mm larger than panel size with the pop-out cutting template provided).
• Lockable using a budget lock (supplied).

Please Note: the structural opening size (hole in the wall or ceiling) needs to be at least 5 mm larger than the panel size, back of frame size (i.e. 600 x 600 mm panel size requires a 605 x 605 mm hole etc).