Steel, Wood, Chipboard, Cement, Cementitious, Rubber

-

-

Rectangle

-

-

2000 mm, Bespoke

-

-

60 mm, 80 mm, Bespoke

-

-

36 mm, 56 mm, 64 mm, 89 mm, Bespoke

-

-

Ten year

-

-

Steel and elastomer.

-

-

-

-

-

36 mm.

-

-

60 mm.

-

-

0.1–3 MPa per pad.

-

-

The structural floor should comply with the required tolerances regarding the gradient (0.1% or 1 mm/m) and smoothness (max. 2 mm) prior to installation of the CDM Stravitec floating floor. The subfloor should be dry and clean of any debris (dust, dirt, grease, foreign objects) prior to installation.

-

-

Perimeter strip, 10 x 50 x 10 000 mm., Perimeter strip, 10 x 100 x 10 000 mm., Perimeter strip, 10 x 150 x 10 000 mm., Perimeter strip, 10 x 200 x 10 000 mm.

-

-

CDM Stravitec resilient pads, Pad-L (low stiffness)., CDM Stravitec resilient pads, Pad-M (medium stiffness)., CDM Stravitec resilient pads, Pad-H (high stiffness)., CDM Stravitec resilient pads, Pad-X (extra high stiffness).

-

-

Metal channels 60 x 2000 mm with pads 30 mm thick.

-

-

Concrete - 18 mm V313 chipboard formwork and 100 mm concrete.
, Concrete - 18 mm V313 chipboard formwork and 125 mm concrete., Concrete - 18 mm V313 chipboard formwork and 150 mm concrete., Panelized - 2no. 18 mm V313 chipboard., Panelized - 2no. 18mm plywood., Panelized - 18mm plywood, 2no. 12.5 mm cement board, 18 mm plywood.

-

-

Mineral wool, 20 mm., Mineral wool, 40 mm.

-

-

Acoustic test standard: Rw measured in accordance with ISO 10140-2:2021 and single figure ratings determined in accordance with EN ISO 717-1:2021. Ln,w and ∆Lw measured in accordance with ISO 10140-3:2021 and single figure ratings determined in accordance with EN ISO 717-2:2013.

-

-

Up to 73 dB.

-

-

ΔLw: Up to 40 dB.

-

-

Minimum build-up height: 136 mm (wet/concrete system); 76 mm (dry/timber/cement boards system).

-

-

36 mm (minimum).

-

-

No

-

-

Europe

-

-

Europe

-

-