NBS Source
I'm a manufacturer

Compare variants

Celotex CW4000
Celotex CW4000
Celotex CW4000

Verified 2 months ago

Celotex

Verified 2 months ago

Celotex

Verified 2 months ago

Celotex
Summary
PIR insulation for partial fill masonry cavity walls.
-
-
Application

Walls - External Wall Insulation - Partial Fill Masonry Cavity Walls

-
-
Description

Celotex CW4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 40 mm to 100 mm, it is suitable for use in partial fill cavity wall applications.

Product Features

  • Lightweight 1200 x 450 mm boards
  • Squared edges
  • Low emissivity foil facing
  • BBA approved – certificate 24/7312 (Partial Fill Cavity Walls)

Fire Classification

Euroclass F Reaction to Fire classification, according to BS EN 13501-1. Products with this level of classification are not provided with a rating for smoke emission.

Product Benefits

  • Thermal Performance - Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value.
  • High Performance Facer - Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value.
  • Easy to Install - The boards are light and rigid assisting with ease of transportation, handling and fitting. They are sized to fit standard wall tie spacing for ease of installation.
  • BBA Certified - Celotex CW4000 has been assessed by the BBA as fit for use in defined partial fill cavity wall applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/BBA for full details and restrictions.

Key Considerations

When using Celotex CW4000, you need to satisfy yourself that use of the product meets all relevant national Building Regulations and guidance as well as local, national and other applicable standards relevant for your construction or application, including requirements in relation to fire and applicable height restrictions.

Please refer to the following product documents:

  • Product Datasheet
  • BBA Certificate
  • Declaration of Performance
  • Health & Safety Datasheet

Celotex CW4000 should not be used in the external walls of buildings over 11 metres in height. Recent changes to Building Regulations mean that only non-combustible insulation or insulation of limited combustibility should be used in buildings of that height.

-
-
Product certifications
-
-
Color
Silver, Cream
-
-
Finish
Foil
-
-
Material
Polyisocyanurate (PIR)
-
-
Shape
Rectangle
-
-
Length
450 mm
-
-
Width
1200 mm
-
-

Specification

Standard
To BS EN 13165.
-
-
Third-party certification
BBA approved 16/5343; ISO 9001; ISO 14001; UKCA marked.
-
-
Fire performance
Euroclass F Reaction to Fire classification, according to BS EN 13501-1. Products with this level of classification are not provided with a rating for smoke emission.
-
-
Thermal conductivity (maximum)
0.022 W/m.K.
-
-
Compressive strength at 10% deformation
Manufacturer’s standard.
-
-
Cross section
Uniform thickness.
-
-
Thickness (nominal)
40 mm.
-
-
Face size (length x width)
1200 x 450 mm.
-
-
Density
Manufacturer's standard.
-
-
Recycled content
Manufacturer's standard.
-
-
Facing
Foil.
-
-
Edges
Square.
-
-

Additional properties

Thermal resistance (R-value)
1.80 m²K/W.
-
-
Handling
Manufacturer's standard.
-
-

Sustainability data

Country of product manufacture
United Kingdom
-
-
Manufacturing plant location
England, UK
-
-
Material
Polyisocyanurate (PIR)
-
-