• At the abutment of a flat roof with a cavity wall.
• At the abutment of a lean-to or mono pitch roof with a cavity wall.
• Over concrete ring beams.
• Over airbricks, cavity liners, ducts, meter boxes, etc.
• On external walls (not exceeding 102.5 mm in thickness) built from standard brickwork, blockwork or stone.
• Clear cavity widths of 50–125 mm.

• At the abutment of a flat roof with a cavity wall.
• At the abutment of a lean-to or mono pitch roof with a cavity wall.
• Over concrete ring beams.
• Over airbricks, cavity liners, ducts, meter boxes, etc.
• On external walls (not exceeding 102.5 mm in thickness) built from standard brickwork, blockwork or stone.
• Clear cavity widths of 50–125 mm.

• At the abutment of a flat roof with a cavity wall.
• At the abutment of a lean-to or mono pitch roof with a cavity wall.
• Over concrete ring beams.
• Over airbricks, cavity liners, ducts, meter boxes, etc.
• On external walls (not exceeding 102.5 mm in thickness) built from standard brickwork, blockwork or stone.
• Clear cavity widths of 50–125 mm.

Preformed horizontal cavity tray system for new build and existing walls.

Features and benefits:

• Fits all clear cavity sizes up to 125 mm.
• Suitable for brick, block and stone wall construction (cutting of masonry may be required).
• 150 mm-high back upstand exceeds minimum requirements of NHBC.
• Angled section between cavity.
• Interlocking mechanism for joining tray lengths to eliminate tray jointing.
• Built to brick bonding lengths for ease of use.
• Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
• Built independent to the inner leaf will enable inner and outer leafs to be built independently, if required.
• Available in two lengths: four-brick for general use and two-brick for reducing waste when making up a run of cavity tray to the required length.
• Can be specified separately with a pre-applied polystyrene strip mortar barrier.

Quality:

• Satisfies all NHBC requirements.
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
• Complies with all relevant Building Regulations.
• Meets all relevant British Standards.

Preformed horizontal cavity tray system for new build and existing walls.

Features and benefits:

• Fits all clear cavity sizes up to 125 mm.
• Suitable for brick, block and stone wall construction (cutting of masonry may be required).
• 150 mm-high back upstand exceeds minimum requirements of NHBC.
• Angled section between cavity.
• Interlocking mechanism for joining tray lengths to eliminate tray jointing.
• Built to brick bonding lengths for ease of use.
• Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
• Built independent to the inner leaf will enable inner and outer leafs to be built independently, if required.
• Available in two lengths: four-brick for general use and two-brick for reducing waste when making up a run of cavity tray to the required length.
• Can be specified separately with a pre-applied polystyrene strip mortar barrier.

Quality:

• Satisfies all NHBC requirements.
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
• Complies with all relevant Building Regulations.
• Meets all relevant British Standards.

Preformed horizontal cavity tray system for new build and existing walls.

Features and benefits:

• Fits all clear cavity sizes up to 125 mm.
• Suitable for brick, block and stone wall construction (cutting of masonry may be required).
• 150 mm-high back upstand exceeds minimum requirements of NHBC.
• Angled section between cavity.
• Interlocking mechanism for joining tray lengths to eliminate tray jointing.
• Built to brick bonding lengths for ease of use.
• Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
• Built independent to the inner leaf will enable inner and outer leafs to be built independently, if required.
• Available in two lengths: four-brick for general use and two-brick for reducing waste when making up a run of cavity tray to the required length.
• Can be specified separately with a pre-applied polystyrene strip mortar barrier.

Quality:

• Satisfies all NHBC requirements.
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
• Complies with all relevant Building Regulations.
• Meets all relevant British Standards.