Primarily designed to be used with Newton sump systems for the removal of ground water collected by the Newton System 500 basement waterproofing system, Newton NP750 can also be used for the removal of water from:

• Flooded basements and cellars.
• Light-wells.
• Surface drainage collection vessels.
• Reservoirs and water holding.

A range of high-quality clean water pumps, suitable for the removal of ground water from basements and cellars. The unique vertical operation float switch ensures that the pumps operate within their footprint, removing the possibility of the float snagging during operation and allowing the pumps to be used within smaller sumps. The vertical float switch is also very flexible, allowing the pump switching height to be adjusted both in terms of the height between the ‘on’ and ‘off’ positions, as well as the height relative to the pump.

A high head and high to medium performance pump. The NP400 is available as an automatic pump (as shown), or as a manual pump for use with our pump control systems.

The automatic version is also fitted with a vertical operation float switch, ensuring that the pump operates within its footprint, removing the possibility of the float snagging during operation and allowing the pump to be used within smaller sumps.

The vertical float switch is also very flexible, allowing the pump switching height to be adjusted between the ‘on’ and ‘off’ positions, as well as the height relative to the pump.

Newton NP Pumps hold a 3 year back to base manufacturers warranty. If installed and maintained by a Newton approved installer, the back to base warranty increases to 5 years

High performance ground and clean water pump. The NP750 is available as an automatic pump or as a manual pump for use with our pump control systems. The NP750 is available as pump only, or as a key component in our Newton Titan-Pro packaged pump systems. It can be used with Newton Victron Power Inverter 12/3000/125 to give continual pumping during power outage.

The NP750 is supplied with a 2” female BSP threaded outlet ready for 50mm or 63mm pressure rated pipe and fittings. Pressure pipe, fittings and one-way-valves should be ordered with the pump. When supplied within the Titan-Pro pumping systems, the internal pipe work and one-way-valve are included.

Two versions of the pump are available: Purchase Code P5 is the automatic self switching pump and Purchase Code P6 is the manual version for use with our pump control systems.

Features and benefits:

• Thermal overload protection against motor burnout.
• Non-clogging vortex impeller.
• Protection against motor burnouts due to a locked impeller.
• Double mechanical seals ensure increased durability against particle abrasion and wear.
• Anti-airlock impellor housing ensures that the pump is able to remove trapped air even when the sump was previously dry.
• High performance and efficiency, even with a low current.
• Auto model has a unique vertical float that allows complete adjustment of the start and stop heights.