Südanit 280 Alpha Hemihydrate Screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads.

Südanit 280 Alpha Hemihydrate Screed may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene), or as a floating floor, and is particularly suited in conjunction with underfloor heating or cavity floors.

Südanit 280 Alpha Hemihydrate Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet.

If a cement-based adhesive or smoothing compound is required, the surface of the screed must first be sealed, using an appropriate acrylic primer/sealer.

Related Downloads

•   TDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System I
• TDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System II
•   Sudanit 280 Alpha Hemihydrate Floor Screed – UFH Commissioning – Floor Screed Drying Schedule
• EPD – CASEA Calcium Sulphate Flowing Screed
• SMET Floor Screeds and Compounds Product Selector

Südanit 280 Alpha Hemihydrate Screed is a pumpable, high-quality screed material based on calcium sulfate.

It is supplied using a pre-blended compound and is mixed on site with a special blend of approved aggregates to EN 13813: 2002.

It is designed for application at thicknesses of 20–90 mm. Südanit 280 Alpha Hemi Hydrate Binder complies with EN 13454-1: 2004 and is CE marked.

Features and benefits:

• Smooth laitance free finish.
• Pumpable.
• Underfloor heating – full encapsulation.
• Suitable for underlayment in wet areas.
• Reduced drying times.
• CE marked.
• BS EN 13454-1/ EN 13813: 2002.