Summary
Mortice lock, self-locking, electric coupling, panic C.
Mortice lock, self-locking, electric coupling, panic C.
Mortice lock, self-locking, electric coupling, panic C.
Application
For doors with electrically controlled lever handle operation in residential and commercial buildings.
For doors with electrically controlled lever handle operation in residential and commercial buildings.
For doors with electrically controlled lever handle operation in residential and commercial buildings.
Description
For doors with electrically controlled lever handle operation in residential and commercial buildings. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt-switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.
Features and benefits:
- Split three-part lock follower; square 9 mm.
- Self-locking with sequence control and latch blocking.
- Electrically couplable external lever handle.
- Emergency opening via the cylinder (forced locking function).
- Panic C: panic side reversible inwards/ outwards.
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
- Method of operation: standby/ operating current can be switched (DIP switch).
- Opening impulse protected against tampering: can be switched on/ off (DIP switch).
- Connection cable (not in scope of supply): 12-pin; 10/20 m; 0.14 mm2.
- Operating voltage: 12/24 V d.c. +/-15%; 100/50 mA.
- Inputs: 12/24 V d.c. at GND.
- Outputs: potential free; loading capacity 30 V d.c./100 mA.
- Hardened deadbolt; 20 mm throw.
- Dampened, reversible DIN L/R comfort latch.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
For doors with electrically controlled lever handle operation in residential and commercial buildings. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt-switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.
Features and benefits:
- Split three-part lock follower; square 9 mm.
- Self-locking with sequence control and latch blocking.
- Electrically couplable external lever handle.
- Emergency opening via the cylinder (forced locking function).
- Panic C: panic side reversible inwards/ outwards.
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
- Method of operation: standby/ operating current can be switched (DIP switch).
- Opening impulse protected against tampering: can be switched on/ off (DIP switch).
- Connection cable (not in scope of supply): 12-pin; 10/20 m; 0.14 mm2.
- Operating voltage: 12/24 V d.c. +/-15%; 100/50 mA.
- Inputs: 12/24 V d.c. at GND.
- Outputs: potential free; loading capacity 30 V d.c./100 mA.
- Hardened deadbolt; 20 mm throw.
- Dampened, reversible DIN L/R comfort latch.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
For doors with electrically controlled lever handle operation in residential and commercial buildings. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt-switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.
Features and benefits:
- Split three-part lock follower; square 9 mm.
- Self-locking with sequence control and latch blocking.
- Electrically couplable external lever handle.
- Emergency opening via the cylinder (forced locking function).
- Panic C: panic side reversible inwards/ outwards.
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
- Method of operation: standby/ operating current can be switched (DIP switch).
- Opening impulse protected against tampering: can be switched on/ off (DIP switch).
- Connection cable (not in scope of supply): 12-pin; 10/20 m; 0.14 mm2.
- Operating voltage: 12/24 V d.c. +/-15%; 100/50 mA.
- Inputs: 12/24 V d.c. at GND.
- Outputs: potential free; loading capacity 30 V d.c./100 mA.
- Hardened deadbolt; 20 mm throw.
- Dampened, reversible DIN L/R comfort latch.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Color
Silver
Silver
Silver
Finish
Matt
Matt
Matt
Material
Stainless steel
Stainless steel
Stainless steel
Length
300 mm
300 mm
300 mm
Height
18 mm, 20 mm
18 mm, 20 mm
18 mm, 20 mm
SKU Code
18907
18907
18907
Specification
Classification data
Standard
To EN 12209, EN 14846, EN 1125 and EN 179.
To EN 12209, EN 14846, EN 1125 and EN 179.
To EN 12209, EN 14846, EN 1125 and EN 179.
Latch or lock type
Electromechanical mortice lock.
Electromechanical mortice lock.
Electromechanical mortice lock.
Backset
65 mm., 70 mm., 80 mm.
60 mm., 70 mm., 80 mm.
65 mm., 80 mm.
Material and finish
Matt stainless steel faceplate.
Matt stainless steel faceplate.
Matt stainless steel faceplate.
Additional properties
Operating voltage
12/24 V d.c. +/-15%; 100/50 mA.
12/24 V d.c. +/-15%; 100/50 mA.
12/24 V d.c. +/-15%; 100/50 mA.
Cut-outs
PZ, 72 mm., PZ, 92 mm., RZ, 74 mm., RZ, 94 mm.
RZ, 78 mm., PZ, 78 mm.
PZ, 88 mm.
Locks with follower
9 mm.
9 mm.
9 mm.
Forend
Radiussed, 20 x 300 mm.
Radiussed, 18 x 300 mm., Radiussed, 20 x 300 mm.
Radiussed, 20 x 300 mm.