Summary
Wall Mounted Cycle holder.
Wall Mounted Cycle holder.
Application
Suitable for use as a bicycle holder.
Suitable for use as a bicycle holder.
Description
The simplest cycle holder, a familiar sight throughout the UK, allows the tyre of the bicycle to be supported.
Features and benefits:
- The stand is fixed to a suitable wall and can be spaced at no less than 610 mm between holders for cost effective cycle parking.
- The Model R is available in either 90° or 45° versions which allow for cycles to be parked either head-on or angled.
- The practical and durable nature of the AUTOPA Model R cycle holder ensures it has been consistently specified and used since it’s introduction in the 1950’s.
- Galvanized steel tube.
Installation:
- Must be fixed to a suitable brick or concrete wall.
- Centre of holders should be approximately 345 mm (197 mm to centre of lower fixing hole) above ground level.
The simplest cycle holder, a familiar sight throughout the UK, allows the tyre of the bicycle to be supported.
Features and benefits:
- The stand is fixed to a suitable wall and can be spaced at no less than 610 mm between holders for cost effective cycle parking.
- The Model R is available in either 90° or 45° versions which allow for cycles to be parked either head-on or angled.
- The practical and durable nature of the AUTOPA Model R cycle holder ensures it has been consistently specified and used since it’s introduction in the 1950’s.
- Galvanized steel tube.
Installation:
- Must be fixed to a suitable brick or concrete wall.
- Centre of holders should be approximately 345 mm (197 mm to centre of lower fixing hole) above ground level.
Finish
Galvanized
Galvanized
Material
Steel
Steel
Length
212 mm
212 mm
Width
90 mm
90 mm
Height
346 mm
346 mm
Warranty description
One year
One year
SKU Code
138 200 001, 138 200 002
138 200 001, 138 200 002
Specification
Classification data
Stand type
Cycle.
Cycle.
Base
Bolt down.
Bolt down.
Finish as delivered
Galvanized.
Galvanized.
Additional properties
Weight
1.9 kg.
1.9 kg.
Angle
90°.
45°.
Accessories
Not required., 138 200 047 - M10 Raw bolt (2 required per cycle holder).
Not required., 138 200 047 - M10 Raw bolt (2 required per cycle holder).
Standards
To ISO 9001, ISO 14001 and OHSAS 18001.
To ISO 9001, ISO 14001 and OHSAS 18001.
Sustainability data
Country of product manufacture
United Kingdom
United Kingdom
Material
Steel
Steel