Mixing

Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin. 

Watco Epoxy Gloss/ Matt Coat Application

• Best results are obtained in warm (minimum 15ºC), dry conditions with good ventilation. In very high temperatures (30ºC and above) it is recommended that bare concrete is lightly dampened first with water. Apply with a medium pile roller, working well into the surface of the concrete. Do not exceed the maximum coverage of 30m² per 5 litre pack, per coat. The product will darken slightly as curing commences and it should not be over rollered. The second coat can be applied as soon as the first coat is dry (generally 4-6 hours) and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for seven days.

Epoxy Gloss Coat:

Watco Epoxy Gloss Coat has been re-formulated to produce a ‘Best in Class’ water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. The blend of the resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.

Epoxy Matt Coat:

A tough two pack epoxy paint with a matt finish. Ideal for floors with imperfections as the matt finish will hide these.

Epoxy Gloss Coat Hygienic:

Tough, hard wearing glossy floor finish for medium to heavy wear areas, ideal for areas where hygiene is important.

Epoxy Matt Coat Hygienic:

Tough, hard wearing Matt floor finish for medium to heavy wear areas, ideal for areas where hygiene is important.

Features and benefits:

Epoxy Gloss Coat:

• Tough, hard wearing floor finish for heavy wear areas.
• Apply to bare or previously painted surfaces.
• Easy roller, low odour application.
• Apply 2 coats in one day to reduce downtime.
• New colour formulations to RAL shades.
• Gloss, Matt or Hygienic versions available.
• Tested safe for use in food production areas.
• Superior performance demonstrated by ISO testing to CE mark EN1504-2.

Epoxy Matt Coat:

• Tough, hard wearing floor finish for heavy wear areas.
• Apply to bare or previously painted surfaces.
• Easy roller, low odour application.
• Apply 2 coats in one day to reduce downtime
• New colour formulations to RAL shades.
• Gloss, Matt or Hygienic versions available.
• Tested safe for use in food production areas.
• Superior performance demonstrated by ISO testing to CE mark EN1504-2.

Epoxy Damp Proof Membrane:

• 100% solids, high build coating.
• Virtually solvent free liquid epoxy resin damp-proofer.
• Withstands 98% RH.
• Holds back rising damp where a damp proof membrane is either missing or defective.
• Can be over painted after 16 hours with most types of floor coatings.

Epoxy Gloss Coat Hygienic:

• Tough, hard wearing floor finish for heavy wear areas.
• Apply to bare or previously painted surfaces.
• Easy roller, low odour application.
• Apply 2 coats in one day to reduce downtime.
• New colour formulations to RAL shades.
• Gloss, Matt or Hygienic versions available.
• Tested safe for use in food production areas.
• Superior performance demonstrated by ISO testing to CE mark EN1504-2.

Epoxy Matt Coat Hygienic:

• Tough, hard wearing floor finish for heavy wear areas.
• Apply to bare or previously painted surfaces.
• Easy roller, low odour application.
• Apply 2 coats in one day to reduce downtime.
• New colour formulations to RAL shades.
• Gloss, Matt or Hygienic versions available.
• Tested safe for use in food production areas.
• Superior performance demonstrated by ISO testing to CE mark EN1504-2.