Summary
Multipoint lock, self-locking, motorized opening, panic E.
Multipoint lock, self-locking, motorized opening, panic E.
Multipoint lock, self-locking, motorized opening, panic E.
Application
For use in residential and commercial buildings and automated doors.
For use in residential and commercial buildings and automated doors.
For use in residential and commercial buildings and automated doors.
Description
Multipoint lock, self-locking, motorized opening, panic E. Operation from outside (knob/pull handle) via electronic identification systems (e.g. badge) or via the cylinder. In daytime release mode (self-locking inactive), the door can be opened very quickly (< 0.4 sec). This method of operation is particularly suitable for heavily used doors needing controlled access.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with «L-cam». Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt switch contact is recommended. Scope of supply: without connection cable or accessories.
Features and benefits:
- Four-part clamp follower, square 9 mm, panic E.
- Three hardened deadbolts; 20 mm throw.
- Slider protection: mechanical at top; cover at bottom.
- Dampened, reversible DIN L+R comfort latch with latch blocking.
- Smooth-running latch withdrawal for retracting the latch.
- Self-locking with mechanical sequence control (electronically monitored to prevent unwanted throwing of the deadbolt) and tampering protection (Mode 2+4).
- Four operating modes and acoustic signals can be set via the DIP switch (Mode 1 = factory setting).
- Recommended connection cable: 6-pin; 10/20 m; 0.5 mm2.
- Inputs: opening and/or daytime release function earthed (GND).
- Output: potential free; max. 125 V a.c./300 mA or 30 V d.c./1 A.
- Feedback contact: Mode 1 ‘locked’; Mode 2+3 ‘door closed + locked’; Mode 4 for door drive ‘open’ as long as latch + bolt are retracted by the motor.
- Power: 24 V d.c./1.5 A (36 W); 12 V d.c./3.9 A (47 W) possible.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Multipoint lock, self-locking, motorized opening, panic E. Operation from outside (knob/pull handle) via electronic identification systems (e.g. badge) or via the cylinder. In daytime release mode (self-locking inactive), the door can be opened very quickly (< 0.4 sec). This method of operation is particularly suitable for heavily used doors needing controlled access.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with «L-cam». Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt switch contact is recommended. Scope of supply: without connection cable or accessories.
Features and benefits:
- Four-part clamp follower, square 9 mm, panic E.
- Three hardened deadbolts; 20 mm throw.
- Slider protection: mechanical at top; cover at bottom.
- Dampened, reversible DIN L+R comfort latch with latch blocking.
- Smooth-running latch withdrawal for retracting the latch.
- Self-locking with mechanical sequence control (electronically monitored to prevent unwanted throwing of the deadbolt) and tampering protection (Mode 2+4).
- Four operating modes and acoustic signals can be set via the DIP switch (Mode 1 = factory setting).
- Recommended connection cable: 6-pin; 10/20 m; 0.5 mm2.
- Inputs: opening and/or daytime release function earthed (GND).
- Output: potential free; max. 125 V a.c./300 mA or 30 V d.c./1 A.
- Feedback contact: Mode 1 ‘locked’; Mode 2+3 ‘door closed + locked’; Mode 4 for door drive ‘open’ as long as latch + bolt are retracted by the motor.
- Power: 24 V d.c./1.5 A (36 W); 12 V d.c./3.9 A (47 W) possible.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Multipoint lock, self-locking, motorized opening, panic E. Operation from outside (knob/pull handle) via electronic identification systems (e.g. badge) or via the cylinder. In daytime release mode (self-locking inactive), the door can be opened very quickly (< 0.4 sec). This method of operation is particularly suitable for heavily used doors needing controlled access.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with «L-cam». Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt switch contact is recommended. Scope of supply: without connection cable or accessories.
Features and benefits:
- Four-part clamp follower, square 9 mm, panic E.
- Three hardened deadbolts; 20 mm throw.
- Slider protection: mechanical at top; cover at bottom.
- Dampened, reversible DIN L+R comfort latch with latch blocking.
- Smooth-running latch withdrawal for retracting the latch.
- Self-locking with mechanical sequence control (electronically monitored to prevent unwanted throwing of the deadbolt) and tampering protection (Mode 2+4).
- Four operating modes and acoustic signals can be set via the DIP switch (Mode 1 = factory setting).
- Recommended connection cable: 6-pin; 10/20 m; 0.5 mm2.
- Inputs: opening and/or daytime release function earthed (GND).
- Output: potential free; max. 125 V a.c./300 mA or 30 V d.c./1 A.
- Feedback contact: Mode 1 ‘locked’; Mode 2+3 ‘door closed + locked’; Mode 4 for door drive ‘open’ as long as latch + bolt are retracted by the motor.
- Power: 24 V d.c./1.5 A (36 W); 12 V d.c./3.9 A (47 W) possible.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Color
Silver
Silver
Silver
Finish
Matt
Matt
Matt
Material
Stainless steel
Stainless steel
Stainless steel
Length
1744 mm, 1788 mm, 1850 mm
1744 mm, 1788 mm, 1850 mm
1744 mm, 1788 mm, 1850 mm
Height
18 mm, 20 mm
18 mm, 20 mm
18 mm, 20 mm
SKU Code
18947
18947
18947
Specification
Classification data
Lock type
Multipoint mortice lock.
Multipoint mortice lock.
Multipoint mortice lock.
Category of use
-
-
-
Standard
To DIN 18251-3, EN 14846, EN 1125 and EN 179.
To DIN 18251-3, EN 14846, EN 1125 and EN 179.
To DIN 18251-3, EN 14846, EN 1125 and EN 179.
Backset
60 mm., 70 mm., 80 mm.
65 mm., 70 mm., 80 mm.
65 mm., 80 mm.
Material and finish
Matt stainless steel faceplate.
Matt stainless steel faceplate.
Matt stainless steel faceplate.
Additional properties
Power
24 V d.c./1.5 A (36 W)., 12 V d.c./3.9 A (47 W).
24 V d.c./1.5 A (36 W)., 12 V d.c./3.9 A (47 W).
24 V d.c./1.5 A (36 W)., 12 V d.c./3.9 A (47 W).
Cut-outs
RZW, 78 mm., PZW, 78 mm.
PZW, 72 mm., PZW, 92 mm., RZW, 74 mm., RZW, 94 mm.
PZW, 88 mm.
Locks with follower
9 mm.
9 mm.
9 mm.
Forend
Radiussed, 18 x 1788 mm., Radiussed, 20 x 1788 mm.
Radiussed, 20 x 1744 mm.
Radiussed, 20 x 1850 mm.
Accessories
Not required., 82760 concealed plug-in door loop.
Not required., 82760 concealed plug-in door loop.
Not required., 82760 concealed plug-in door loop.