NBS Source
I'm a manufacturer

Compare variants

elZinc Flat Lock Cladding - Zinc Roof and Wall Cladding
elZinc Flat Lock Cladding - Zinc Roof and Wall Cladding
elZinc Flat Lock Cladding - Zinc Roof and Wall Cladding

Verified 1 month ago

elZinc

Flat Lock Cladding - Horizontal

Verified 1 month ago

elZinc

Flat Lock Cladding - Vertical

Verified 1 month ago

elZinc

Flat Lock Cladding - Oblique

Summary
Traditional fully supported architectural zinc cladding system composed of interlocking zinc shingles.
Traditional fully supported architectural zinc cladding system composed of interlocking zinc shingles.
Traditional fully supported architectural zinc cladding system composed of interlocking zinc shingles.
Third party certification
Color
Grey, Red, Blue, Brown, Gold, Black, Green, Other
Grey, Red, Blue, Brown, Gold, Black, Green, Other
Grey, Red, Blue, Brown, Gold, Black, Green, Other
Finish
Natural, Pre-weathered
Natural, Pre-weathered
Natural, Pre-weathered
Material
Zinc
Zinc
Zinc
Shape
Square, Rectangle, Rhombus
Square, Rectangle, Rhombus
Square, Rectangle, Rhombus
Width
430 mm, 530 mm, 600 mm
430 mm, 530 mm, 600 mm
430 mm, 530 mm, 600 mm
Warranty description
Lifetime, 20 year
Lifetime, 20 year
Lifetime, 20 year

Specification

Air and vapour control layer
Not required., AVCL.
Not required., AVCL.
Not required., AVCL.
Carrier
Soft wood battens., Metal rails.
Soft wood battens., Metal rails.
Soft wood battens., Metal rails.
Substrate
Sheathing/ boarding., Ventilated plywood substrate, 18 mm., Ventilated galvanized steel metal deck, 0.7 mm., Open gap softwood boarding according to EN 12775-2, 18 mm., Foamglas insulating boards.
Sheathing/ boarding., Ventilated plywood substrate, 18 mm., Ventilated galvanized steel metal deck, 0.7 mm., Open gap softwood boarding according to EN 12775-2, 18 mm., Foamglas insulating boards.
Sheathing/ boarding., Ventilated plywood substrate, 18 mm., Ventilated galvanized steel metal deck, 0.7 mm., Open gap softwood boarding according to EN 12775-2, 18 mm., Foamglas insulating boards.
Sheet underlay
-
-
-
Material
Not required., Structural underlay., Breather membrane.
Not required., Structural underlay., Breather membrane.
Not required., Structural underlay., Breather membrane.
Zinc sheet
0.7 mm thick elZinc® titanium zinc., 0.8 mm thick elZinc® titanium zinc.
0.7 mm thick elZinc® titanium zinc., 0.8 mm thick elZinc® titanium zinc.
0.7 mm thick elZinc® titanium zinc., 0.8 mm thick elZinc® titanium zinc.
Vertical joints
-
-
-
Form
Single lock cross welt.
Single lock cross welt.
Single lock cross welt.
Fixing standing seam joints
Stainless steel clips.
Stainless steel clips.
Stainless steel clips.
Fasteners to substrate
A2 stainless steel annular ring shank clout nails, 3.35 x 25 mm., A2 stainless steel wood screws - countersunk head, 4.5 x 25 mm., A2 stainless steel pop rivet, 3.2 mm diameter., A2 stainless steel self-tapping screw - flat head, 4.8 x 25 mm.
A2 stainless steel annular ring shank clout nails, 3.35 x 25 mm., A2 stainless steel wood screws - countersunk head, 4.5 x 25 mm., A2 stainless steel pop rivet, 3.2 mm diameter., A2 stainless steel self-tapping screw - flat head, 4.8 x 25 mm.
A2 stainless steel annular ring shank clout nails, 3.35 x 25 mm., A2 stainless steel wood screws - countersunk head, 4.5 x 25 mm., A2 stainless steel pop rivet, 3.2 mm diameter., A2 stainless steel self-tapping screw - flat head, 4.8 x 25 mm.
Cross joints
-
-
-
Form
Staggered cross joint., Irregular cross joint., Stepped cross joint.
Staggered cross joint., Irregular cross joint., Stepped cross joint., Rhomboid cross joint., Rhomboid irregular cross joint.
Fully interlocking joints., Partially interlocking (tooth effect) joints.
Head detail
-
-
-
Form
Front vented with zinc wall capping., Rear vented with zinc wall capping., Unvented with zinc wall capping.
Front vented with zinc wall capping., Rear vented with zinc wall capping., Unvented with zinc wall capping.
Front vented with zinc wall capping., Rear vented with zinc wall capping., Unvented with zinc wall capping.
Bottom edge detail
-
-
-
Form
T-plate starter flashing and cavity inlet at foot., Starter T-plate.
T-plate starter flashing and cavity inlet at foot., Starter T-plate.
T-plate starter flashing and cavity inlet at foot., Starter T-plate.
Execution
-
-
-

Additional properties

Panel width
430 mm., 263 mm., 530 mm., 580 mm., 600 mm.
430 mm., 263 mm., 530 mm., 580 mm., 600 mm.
430 mm., 263 mm., 530 mm., 580 mm., 600 mm.
Colour/ Finish
elZinc Crystal®., elZinc Graphite®., elZinc Lava®., elZinc Natural., elZinc Oliva®., elZinc Rainbow® Black., elZinc Rainbow® Blue., elZinc Rainbow® Brown., elZinc Rainbow® Gold., elZinc Rainbow® Green., elZinc Rainbow® Red., elZinc Slate®.
elZinc Crystal®., elZinc Graphite®., elZinc Lava®., elZinc Natural., elZinc Oliva®., elZinc Rainbow® Black., elZinc Rainbow® Blue., elZinc Rainbow® Brown., elZinc Rainbow® Gold., elZinc Rainbow® Green., elZinc Rainbow® Red., elZinc Slate®.
elZinc Crystal®., elZinc Graphite®., elZinc Lava®., elZinc Natural., elZinc Oliva®., elZinc Rainbow® Black., elZinc Rainbow® Blue., elZinc Rainbow® Brown., elZinc Rainbow® Gold., elZinc Rainbow® Green., elZinc Rainbow® Red., elZinc Slate®.
FireRating
A1.
A1.
A1.
Co-efficient of linear thermal expansion
0.000022/ºC.
0.000022/ºC.
0.000022/ºC.

Sustainability data

Contains Red List materials
No
No
No
Country of material origin
Spain
Spain
Spain
Country of product manufacture
Spain
Spain
Spain
Recyclability
100%
100%
100%
Recycled content
20 %
20 %
20 %