NBS Source
I'm a manufacturer

Compare variants

Yeoman Shield Protection Rails
Yeoman Shield Protection Rails
Yeoman Shield Protection Rails

Last verified by manufacturer over a year ago

Yeoman Shield, trading name of Harrison Thompson & Co Ltd

75 mm.

Last verified by manufacturer over a year ago

Yeoman Shield, trading name of Harrison Thompson & Co Ltd

125 mm.

Last verified by manufacturer over a year ago

Yeoman Shield, trading name of Harrison Thompson & Co Ltd

200 mm.

Summary
Impact absorbing protection rails.
Impact absorbing protection rails.
Impact absorbing protection rails.
Application

Suitable for use in hospitals, nursing homes, hotels, supermarkets, schools, airports, banks and other commercial premises.

Suitable for use in hospitals, nursing homes, hotels, supermarkets, schools, airports, banks and other commercial premises.

Suitable for use in hospitals, nursing homes, hotels, supermarkets, schools, airports, banks and other commercial premises.

Description

Protection rails designed to protect building fabric against accidental damage.


Features and benefits:

  • Composition: Components are made from a specially formulated PVC-U.
  • Rails are available in three widths.
  • Range of compatible accessories, including stop ends and corners (injection moulded).
  • Available as flat back (to the wall) or Stand off on 60 mm standard spacers
  • Available with a standard stipple finish (designed to conceal the effects of impact and abrasion) in the full range of colours. Manufacturer recommend contrasting colours for stop ends and corners for maximum visibility and aesthetic effect.
  • Can be fixed on clips or on a choice of cores.
  • A full supply and fix service is available using Harrison Thompson direct employed installation specialists.


Approvals:

Textured Extruded Protection Products:

  • B, s2, d0.
  • BS EN 13823: 2010 + A1: 2014.
  • BS EN ISO 11925 - 2: 2010.
  • BS EN 13501 - 1: 2007 + A1: 2009.
  • BS 476: Part 7: 1997 - The Surface Spread of Flame of Products - Class 1Y (Class 1 is the best classification in this test).
  • BS 476: Part 6: 1989 + A1: 2009 - Fire Propagation for Products - Class O - As defined in the latest Building Regulations, Approved Document B (Fire Safety).


VOC Emissions

Yeoman Shield PVCu Falmouth Wall & Door Protection panels have been tested for VOC to ISO 16000-10:2006 Indoor air - Part 10.

 

The test showed the following results:

 

<10 µg m‑2 h‑1 for TVOC

<5 µg m‑2 h‑1 for Formaldehyde

 

The interpretation of these results by BRE are if all the walls (less door and window) of the 30 m3 reference room described in BS EN 16515‑2017

(with a ventilation rate of 0.5 air changes per hour) were clad with our Yeoman Shield PVCu Falmouth Wall & Door Protection Panels, the increase in TVOC in the room would

be <20 µg m‑3 for TVOC and <10 µg m‑3 for Formaldehyde and these are deemed to be low.

 

BREEAM Hea02 has limits of 300 µg m‑3 for TVOC and 100 µg m‑3 for Formaldehyde, so the theoretical increases in TVOC and Formaldehyde from

using our PVCu sheet are deemed as low.



Protection rails designed to protect building fabric against accidental damage.


Features and benefits:

  • Composition: Components are made from a specially formulated PVC-U.
  • Rails are available in three widths.
  • Range of compatible accessories, including stop ends and corners (injection moulded).
  • Available as flat back (to the wall) or Stand off on 60 mm standard spacers
  • Available with a standard stipple finish (designed to conceal the effects of impact and abrasion) in the full range of colours. Manufacturer recommend contrasting colours for stop ends and corners for maximum visibility and aesthetic effect.
  • Can be fixed on clips or on a choice of cores.
  • A full supply and fix service is available using Harrison Thompson direct employed installation specialists.


Approvals:

Textured Extruded Protection Products:

  • B, s2, d0.
  • BS EN 13823: 2010 + A1: 2014.
  • BS EN ISO 11925 - 2: 2010.
  • BS EN 13501 - 1: 2007 + A1: 2009.
  • BS 476: Part 7: 1997 - The Surface Spread of Flame of Products - Class 1Y (Class 1 is the best classification in this test).
  • BS 476: Part 6: 1989 + A1: 2009 - Fire Propagation for Products - Class O - As defined in the latest Building Regulations, Approved Document B (Fire Safety).


VOC Emissions

Yeoman Shield PVCu Falmouth Wall & Door Protection panels have been tested for VOC to ISO 16000-10:2006 Indoor air - Part 10.

 

The test showed the following results:

 

<10 µg m‑2 h‑1 for TVOC

<5 µg m‑2 h‑1 for Formaldehyde

 

The interpretation of these results by BRE are if all the walls (less door and window) of the 30 m3 reference room described in BS EN 16515‑2017

(with a ventilation rate of 0.5 air changes per hour) were clad with our Yeoman Shield PVCu Falmouth Wall & Door Protection Panels, the increase in TVOC in the room would

be <20 µg m‑3 for TVOC and <10 µg m‑3 for Formaldehyde and these are deemed to be low.

 

BREEAM Hea02 has limits of 300 µg m‑3 for TVOC and 100 µg m‑3 for Formaldehyde, so the theoretical increases in TVOC and Formaldehyde from

using our PVCu sheet are deemed as low.



Protection rails designed to protect building fabric against accidental damage.


Features and benefits:

  • Composition: Components are made from a specially formulated PVC-U.
  • Rails are available in three widths.
  • Range of compatible accessories, including stop ends and corners (injection moulded).
  • Available as flat back (to the wall) or Stand off on 60 mm standard spacers
  • Available with a standard stipple finish (designed to conceal the effects of impact and abrasion) in the full range of colours. Manufacturer recommend contrasting colours for stop ends and corners for maximum visibility and aesthetic effect.
  • Can be fixed on clips or on a choice of cores.
  • A full supply and fix service is available using Harrison Thompson direct employed installation specialists.


Approvals:

Textured Extruded Protection Products:

  • B, s2, d0.
  • BS EN 13823: 2010 + A1: 2014.
  • BS EN ISO 11925 - 2: 2010.
  • BS EN 13501 - 1: 2007 + A1: 2009.
  • BS 476: Part 7: 1997 - The Surface Spread of Flame of Products - Class 1Y (Class 1 is the best classification in this test).
  • BS 476: Part 6: 1989 + A1: 2009 - Fire Propagation for Products - Class O - As defined in the latest Building Regulations, Approved Document B (Fire Safety).


VOC Emissions

Yeoman Shield PVCu Falmouth Wall & Door Protection panels have been tested for VOC to ISO 16000-10:2006 Indoor air - Part 10.

 

The test showed the following results:

 

<10 µg m‑2 h‑1 for TVOC

<5 µg m‑2 h‑1 for Formaldehyde

 

The interpretation of these results by BRE are if all the walls (less door and window) of the 30 m3 reference room described in BS EN 16515‑2017

(with a ventilation rate of 0.5 air changes per hour) were clad with our Yeoman Shield PVCu Falmouth Wall & Door Protection Panels, the increase in TVOC in the room would

be <20 µg m‑3 for TVOC and <10 µg m‑3 for Formaldehyde and these are deemed to be low.

 

BREEAM Hea02 has limits of 300 µg m‑3 for TVOC and 100 µg m‑3 for Formaldehyde, so the theoretical increases in TVOC and Formaldehyde from

using our PVCu sheet are deemed as low.



Product certifications
Digital objects
Color
Black, Blue, Brown, Cream, Green, Grey, Orange, Pink, Purple, Red, White, Yellow, Other
Black, Blue, Brown, Cream, Green, Grey, Orange, Pink, Purple, Red, White, Yellow, Other
Black, Blue, Brown, Cream, Green, Grey, Orange, Pink, Purple, Red, White, Yellow, Other
Finish
Textured
Textured
Textured
Material
Medium density fibreboard (MDF), Aluminium, PVC-U
Medium density fibreboard (MDF), Aluminium, PVC-U
Medium density fibreboard (MDF), Aluminium, PVC-U
Length
3500 mm
3500 mm
3500 mm
Width
75 mm, 125 mm, 200 mm
75 mm, 125 mm, 200 mm
75 mm, 125 mm, 200 mm
Height
Bespoke
Bespoke
Bespoke

Specification

Material
Vinylac, a specially formulated PVC-U.
Vinylac, a specially formulated PVC-U.
Vinylac, a specially formulated PVC-U.
Fire rating
To BS EN 13501-1, class A1; BS 476: Part 7: 1997 - Class 1Y and BS 476: Part 6: 1989 + A1: 2009 - Class O.
To BS EN 13501-1, class A1; BS 476: Part 7: 1997 - Class 1Y and BS 476: Part 6: 1989 + A1: 2009 - Class O.
To BS EN 13501-1, class A1; BS 476: Part 7: 1997 - Class 1Y and BS 476: Part 6: 1989 + A1: 2009 - Class O.
Finish
Stipple texture.
Stipple texture.
Stipple texture.
Fixing
Screws.
Screws.
Screws.

Additional properties

Rail width
75 mm.
125 mm.
200 mm.
Strengthening core
None., MDF., Aluminium., Vinylac section.
None., MDF., Aluminium., Vinylac section.
None., MDF., Aluminium., Vinylac section.
Accessories
None., External corner – steel., External corner – Vinylac., Irregular corner – steel., Irregular corner – Vinylac., Stop end – Vinylac., Stop end - steel.
None., External corner – steel., External corner – Vinylac., Irregular corner – steel., Irregular corner – Vinylac., Stop end – Vinylac., Stop end - steel.
None., External corner – steel., External corner – Vinylac., Irregular corner – steel., Irregular corner – Vinylac., Stop end – Vinylac., Stop end - steel.