Surface preparation

Ensure a clean surface free of all loose material and surface water, oil etc for effective pothole repair.

Application

If appearance is critical we recommend the application of a small trial area first.

Pour the primer onto the prepared surface and spread using a brush. Tip or shovel out sufficient material into the hole to slightly overfill it and then compact with the back of a shovel or tamper. In exceptional temperature conditions advice should be obtained from Watco’s Technical Department.

A range of durable bitumen-based patch repair products for use on exterior pot-holed asphalt and concrete.

Watco Bitu-Mend® Advanced is suitable for filling holes in asphalt and similar type floors. It’s strength allows for thinner repairs than conventional products and it is ideal for heavily trafficked areas.

Watco Bitu-Mend® Deep Fill is ideal for filling deep holes (up to 200 mm) in asphalt and concrete, without the need to make up the repair in layers. The epoxy resin formulation provides high strength throughout the depth of the repair making it ideal for heavily trafficked areas.

Watco Bitu-Mend® Pour and Restore is for shallow repairs to damaged or cracked asphalt and tarmac. Mix and pour over pitted, cracked and damaged surfaces and it self-smooths with a trowel.

Bitu-Mend®Pothole Repair :

Watco Bitu-Mend® is a durable bitumen-based patch repair material for use on exterior potholed asphalt and concrete. Repairs with Watco Bitu-Mend® are ready for instant trafficking. 

• Simple to use - no mixing required
• Easily pours from the pack
• Can be driven over immediately after application
• Ideal for repairs 25–75mm thick
• Pack includes primer

Bitu-Mend® Advanced:

• Cures to a hard, black, slip resistant finish.
• Can be applied at any thickness from 10–100 mm.
• Can also be used on concrete.
• Ready for use in 12 hours.

Bitu-Mend® Deep Fill:

• Cures to a hard, black, slip resistant finish.
• No primer required.
• Can be applied at any thickness from 15–200 mm.
• Suitable for use inside and out.
• Ready for use in 12 hours.

Bitu-Mend® Pour & Restore:

• Easy to mix and apply.
• Ideal for shallow repairs.
• Ready for traffic in 16 hours.

Areas of use Bitu-Mend®:

• Ideal for pot-holes in roadways, vehicle parks, loading docks,; paths, airfields etc;
• On bituminous and concrete surfaces.

Bitu-Mend® Advanced:

• Potholes in asphalt and tarmac;
• Gangways and work areas;
• Car parks and loading bays where forklifts and lorries operate;
• Splits and cracks in asphalt;
• Roller shutter door guide rails.

Bitu-Mend® Deep Fill:

• Deep holes in heavily trafficked areas like car parks or loading bays.

Bitu-Mend® pour & restore:

• Repairing shallow depressions, dished or pitted asphalt surfaces;
• Car parks, yards, pavements.