humiSteam basic (Y):

• Suitable for installation in civil environments, offices, hospitals and industrial facilities, and is designed for installation both in rooms, using the steam blower, and air ducts, using the linear steam distributors.
• Suitable for applications where steam production is controlled by an external signal, i.e. BMS or humidistat, and comes in a range from 1.5 to 65 kg/h.

humiSteam X-plus (X):

• For all applications that require high levels of connectivity to ensure maximum control over operation.
• The limit probe reading, in addition to the temperature and relative humidity probes, guarantees greater safety and hygiene. Moreover, modulating operation ensures continuous and efficient control of steam production. Steam production range 1 to 130 kg/h.

humiSteam Wellness (W):

• HumiSteam Wellness, part of the family of immersed electrode steam humidifiers, is designed for steam bath installations.
• Operation in time bands at different temperature set points.
• External device management: four pumps (for essences and disinfection), two fans, one light drain pump to facilitate the removal of scale when draining the water. Steam production range 1 to 65 kg/h.

Immersed electrode humidifiers which are designed to generate safe steam humidification for duct, in-room, or steam bath application. This unit is designed to work with mains water supply with a conductivity level between 75 μS and 1250 μS.

Mains water contains a certain quantity of dissolved mineral salts and is slightly conductive therefore the principle of these units relies on applying voltage to metal electrodes immersed in the water which in turn creates an electric current flow that heats the water until producing steam.

Features and benefits:

• Reliability: The patented Anti Foaming System (AFS) detects and manages foam to prevent droplets of water being carried by the steam.
• Performance: Quick start-up and operation with a wide range of feedwater conductivity values.
• Safety: Modulating limit probe for maximum safety in the ducts.
• Flexibility: Possibility to use mains water, with the software able to automatically adapt to a very wide range of feedwater characteristics.
• Supervision: The new solution with independent connection for remote supervision (X-Plus only).

Certifications:

CE, ETL (UL998), TÜV and EAC.