Summary
Goods lift with carrying capacity of 500–2000 kg, option to carry up to two attendants.
Goods lift with carrying capacity of 500–2000 kg, option to carry up to two attendants.
Application
Goodsmaster CD goods only lift:
500–2000 kg load capacity; low pit and headroom requirements; flexible car and shaft dimensions.
Goodsmaster CD Plus goods attended lift:
Suited to premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/bike lift applications in residential flats requiring waste transfer.
Goodsmaster CD goods only lift:
500–2000 kg load capacity; low pit and headroom requirements; flexible car and shaft dimensions.
Goodsmaster CD Plus goods attended lift:
Suited to premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/bike lift applications in residential flats requiring waste transfer.
Description
The Goodsmaster CD range offers a 500–2000 kg load capacity, with low pit and headroom requirements, together with flexible car and shaft dimensions.
The CD Plus (up to two attendants’ option) is suitable for use in premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/ bike lift applications in residential flats requiring waste transfer. All lifts come with all the safety features required.
Features and benefits:
- Car operating panel – key switch operation with constant pressure control and emergency stop switch.
- Car entrance protection via full height light ray and robust collapsible car gate.
- Alarm device with battery backup and emergency lighting
- Lift car widths and depths can be tailored to suit exact requirements, from 1000 to 2000 mm in 100 mm increments.
- Structure-supported frame with no requirement for load bearing shaft, only lateral support.
- Low pit and headroom requirements for all models.
- The lift operates inside a rapidly erected structure supported frame that is easy to install and requires minimal builder's work. No separate lifting beam is required.
- Shaft cladding in non-fire rated black (RAL 9005) sheet steel is included.
- No separate motor room is required; the control cabinet is mounted to suit site requirements.
- Quiet and efficient chain drive with VVVF operation for greater levelling accuracy, stand-by mode and led lighting - all these features are consistent with BREEAM requirements for a lift.
A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required.
Safety: All Goodsmaster CD models comply fully with the essential safety requirements of The Machinery Directive 2006/42/EC.
Technical characteristics:
- Controls: Fully automatic push button control with call and despatch facilities and a stop switch at each landing entrance.
- Pit depth: 100 mm required as standard. Optional ramp available where no pit is possible.
- Speed: 0.15 m/s nominal for all models.
- Travel: Up to three stops over a total distance of 9 m.
- Headroom: Internal car height + 700 mm (2700 mm as standard).
- Overload: Load weighing device with audible overload signal on all models.
The Goodsmaster CD range offers a 500–2000 kg load capacity, with low pit and headroom requirements, together with flexible car and shaft dimensions.
The CD Plus (up to two attendants’ option) is suitable for use in premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/ bike lift applications in residential flats requiring waste transfer. All lifts come with all the safety features required.
Features and benefits:
- Car operating panel – key switch operation with constant pressure control and emergency stop switch.
- Car entrance protection via full height light ray and robust collapsible car gate.
- Alarm device with battery backup and emergency lighting
- Lift car widths and depths can be tailored to suit exact requirements, from 1000 to 2000 mm in 100 mm increments.
- Structure-supported frame with no requirement for load bearing shaft, only lateral support.
- Low pit and headroom requirements for all models.
- The lift operates inside a rapidly erected structure supported frame that is easy to install and requires minimal builder's work. No separate lifting beam is required.
- Shaft cladding in non-fire rated black (RAL 9005) sheet steel is included.
- No separate motor room is required; the control cabinet is mounted to suit site requirements.
- Quiet and efficient chain drive with VVVF operation for greater levelling accuracy, stand-by mode and led lighting - all these features are consistent with BREEAM requirements for a lift.
A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required.
Safety: All Goodsmaster CD models comply fully with the essential safety requirements of The Machinery Directive 2006/42/EC.
Technical characteristics:
- Controls: Fully automatic push button control with call and despatch facilities and a stop switch at each landing entrance.
- Pit depth: 100 mm required as standard. Optional ramp available where no pit is possible.
- Speed: 0.15 m/s nominal for all models.
- Travel: Up to three stops over a total distance of 9 m.
- Headroom: Internal car height + 700 mm (2700 mm as standard).
- Overload: Load weighing device with audible overload signal on all models.
Product certifications
Color
Black, Other
Black, Other
Finish
Galvanized, Powder-coated
Galvanized, Powder-coated
Material
Steel
Steel
Shape
Rectangle, Square
Rectangle, Square
Length
1000 mm, 1100 mm, 1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm
1000 mm, 1100 mm, 1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm
Width
1000 mm, 1100 mm, 1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm
1000 mm, 1100 mm, 1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm
Height
1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm
1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm
Warranty description
One year
One year
Specification
Classification data
Lift type
Goods lift with option for two attendants.
Goods lift with attendant option.
Lift components
Lift cars.
Lift cars.
Door configuration
Single entrance., Through-car.
Single entrance., Through-car.
Drive position
Top drive.
Top drive.
Speed control
Single-speed.
Single-speed.
Additional properties
Rated load
500 kg., 1000 kg., 1500 kg., 2000 kg.
500 kg., 1000 kg., 1500 kg., 2000 kg.
Car
Manufacturer's standard.
Manufacturer's standard.
Width
1000 mm., 1100 mm., 1200 mm., 1300 mm., 1400 mm., 1500 mm., 1600 mm., 1700 mm., 1800 mm., 1900 mm., 2000 mm.
1000 mm., 1100 mm., 1200 mm., 1300 mm., 1400 mm., 1500 mm., 1600 mm., 1700 mm., 1800 mm., 1900 mm., 2000 mm.
Depth
1000 mm., 1100 mm., 1200 mm., 1300 mm., 1400 mm., 1500 mm., 1600 mm., 1700 mm., 1800 mm., 1900 mm., 2000 mm.
1000 mm., 1100 mm., 1200 mm., 1300 mm., 1400 mm., 1500 mm., 1600 mm., 1700 mm., 1800 mm., 1900 mm., 2000 mm.
Height
2000 mm., 1800 mm., 1900 mm., 2100 mm., 2200 mm.
2000 mm., 1800 mm., 1900 mm., 2100 mm., 2200 mm.
Door clear height
As height.
As height.
Controller
600 x 260 x 1050 mm.
600 x 260 x 1050 mm.
Accessories
None., Bump rails., Chequer plate ramp., Intercom system., Full height infra-red detector., Key-operated car operating panel with constant pressure pushes and stop switch., Single-hinged doors, black sheet steel (RAL 9005)., Single-hinged doors, galvanized steel., Double-hinged doors, black sheet steel (RAL 9005)., Double-hinged doors, galvanized steel.
None., Bump rails., Chequer plate ramp., Intercom system., Full height infra-red detector., Key-operated car operating panel with constant pressure pushes and stop switch., Single-hinged doors, black sheet steel (RAL 9005)., Single-hinged doors, galvanized steel., Double-hinged doors, black sheet steel (RAL 9005)., Double-hinged doors, galvanized steel.
Drive space
Machine room-less.
Machine room-less.
Sustainability data
Contains Red List materials
No
No
Country of material origin
Spain
Spain
Country of product manufacture
Spain
Spain
Recyclability
Metal parts can be recycled
Metal parts can be recycled