Compare variants
Thermally broken hinged flat roof vent which can be installed on a flat (minimum 3°) or pitched roof.
Thermally broken hinged flat roof vent which can be installed on a flat (minimum 3°) or pitched roof.
Thermally broken hinged flat roof vent which can be installed on a flat (minimum 3°) or pitched roof.
Grey, White, Other
Grey, White, Other
Grey, White, Other
Powder-coated
Powder-coated
Powder-coated
Aluminium, Glass
Aluminium, Glass
Aluminium, Glass
Rectangle
Rectangle
Rectangle
Bespoke
Bespoke
Bespoke
Bespoke
Bespoke
Bespoke
Ten year, Two year
Ten year, Two year
Ten year, Two year
Specification
Flat.
Flat.
Flat.
As drawing., As schedule.
As drawing., As schedule.
As drawing., As schedule.
-
-
-
Aluminium.
Aluminium.
Aluminium.
-
-
-
Polyester powder coating.
Polyester powder coating.
Polyester powder coating.
RAL 7015 slate grey and RAL 9010 white., RAL, special order.
RAL 7015 slate grey and RAL 9010 white., RAL, special order.
RAL 7015 slate grey and RAL 9010 white., RAL, special order.
-
-
-
Glass units.
Glass units.
Glass units.
Double glazed.
Triple glazed.
Double glazed.
RAL 7015 slate grey and RAL 9010 white., RAL, special order.
RAL 7015 slate grey and RAL 9010 white., RAL, special order.
RAL 7015 slate grey and RAL 9010 white., RAL, special order.
-
-
-
-
-
-
Printed circuit board (PCB).
Printed circuit board (PCB).
Not required.
Not required., BMS Integration., Enduroshield easy clean glass coating., Rain sensor., Remote control., Ritec glass coating., Thermostat.
Not required., BMS Integration., Enduroshield easy clean glass coating., Rain sensor., Remote control., Ritec glass coating., Thermostat.
Not required., Enduroshield easy clean glass coating., Ritec glass coating.
Installation of framed rooflights.
Installation of framed rooflights.
Installation of framed rooflights.
Additional properties
Inner EPDM rubber bubble seals and outer EPDM rubber seal.
Inner EPDM rubber bubble seals and outer EPDM rubber seal.
Inner EPDM rubber bubble seals and outer EPDM rubber seal.
24 V, 14.6 A, 300 W.
24 V, 14.6 A, 300 W.
Not required.
6 mm clear soft low E toughened heat soak tested.
6 mm clear soft low E toughened heat soak tested.
6 mm clear soft low E toughened heat soak tested.
18 mm black silicone sealed argon filled cavity.
14 mm black silicone sealed argon filled cavity (spacer 1 and 2).
18 mm black silicone sealed argon filled cavity.
Not applicable.
6 mm clear soft low E toughened heat soak tested.
Not applicable.
8.8 mm annealed (PAR) PVB laminated.
8.8 mm annealed (PAR) PVB laminated.
8.8 mm annealed (PAR) PVB laminated.
Sustainability data
Europe
Europe
Europe
United Kingdom
United Kingdom
United Kingdom