Can be installed in electric cabinets with DIN rail attachment.

• DEVIreg™ 330 (-10 to +10°C) is used primarily for controlling a lower temperature range such as frost protection. This thermostat has a button to adjust the temperature setting with a scale from -10 °C to +10 °C. Special outdoor white wire sensor included in the set.
• DEVIreg™ 330 (5–45°C) is used primarily for controlling lower temperature range such as frost protection and for cooling, comfort floor heating, total (direct) floor heating, ice and snow melting on ground, frost protection on roofs, pipe tracing, etc. The thermostat has a button to adjust the temperature setting with a scale from 5–45°C. This type has temperature lowering in economy periods mode by using external timer.
• DEVIreg™ 330 (60–160°C) is used primarily for high temperature maintenance in pipe heating systems. The thermostat has a button to adjust the temperature setting with a scale from 60–160 °C. Special high temperature silicon wire sensor in the set.

Can be installed in electric cabinets with DIN rail attachment.

• DEVIreg™ 330 (-10 to +10°C) is used primarily for controlling a lower temperature range such as frost protection. This thermostat has a button to adjust the temperature setting with a scale from -10 °C to +10 °C. Special outdoor white wire sensor included in the set.
• DEVIreg™ 330 (5–45°C) is used primarily for controlling lower temperature range such as frost protection and for cooling, comfort floor heating, total (direct) floor heating, ice and snow melting on ground, frost protection on roofs, pipe tracing, etc. The thermostat has a button to adjust the temperature setting with a scale from 5–45°C. This type has temperature lowering in economy periods mode by using external timer.
• DEVIreg™ 330 (60–160°C) is used primarily for high temperature maintenance in pipe heating systems. The thermostat has a button to adjust the temperature setting with a scale from 60–160 °C. Special high temperature silicon wire sensor in the set.

Can be installed in electric cabinets with DIN rail attachment.

• DEVIreg™ 330 (-10 to +10°C) is used primarily for controlling a lower temperature range such as frost protection. This thermostat has a button to adjust the temperature setting with a scale from -10 °C to +10 °C. Special outdoor white wire sensor included in the set.
• DEVIreg™ 330 (5–45°C) is used primarily for controlling lower temperature range such as frost protection and for cooling, comfort floor heating, total (direct) floor heating, ice and snow melting on ground, frost protection on roofs, pipe tracing, etc. The thermostat has a button to adjust the temperature setting with a scale from 5–45°C. This type has temperature lowering in economy periods mode by using external timer.
• DEVIreg™ 330 (60–160°C) is used primarily for high temperature maintenance in pipe heating systems. The thermostat has a button to adjust the temperature setting with a scale from 60–160 °C. Special high temperature silicon wire sensor in the set.

Electronic thermostat with IP20 protection, provided with a wire sensor to measure and control the desired temperature.

Features and benefits:

• DIN rail attachment.
• Low temperature area.
• Low standby consumption.
• LED indicator.
• The thermostat has relay with two contact pairs - NO (normally opened) and NC (normally closed). Additionally, NO and NC contact pairs are not wetted by a voltage source inside thermostat, and can be used for control systems with any voltage up to 250 V.
• Three temperature ranges available.
• Compliant with EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat).

Please note the thermostat must be installed via an all-pole disconnection switch.

Electronic thermostat with IP20 protection, provided with a wire sensor to measure and control the desired temperature.

Features and benefits:

• DIN rail attachment.
• Low temperature area.
• Low standby consumption.
• LED indicator.
• The thermostat has relay with two contact pairs - NO (normally opened) and NC (normally closed). Additionally, NO and NC contact pairs are not wetted by a voltage source inside thermostat, and can be used for control systems with any voltage up to 250 V.
• Three temperature ranges available.
• Compliant with EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat).

Please note the thermostat must be installed via an all-pole disconnection switch.

Electronic thermostat with IP20 protection, provided with a wire sensor to measure and control the desired temperature.

Features and benefits:

• DIN rail attachment.
• Low temperature area.
• Low standby consumption.
• LED indicator.
• The thermostat has relay with two contact pairs - NO (normally opened) and NC (normally closed). Additionally, NO and NC contact pairs are not wetted by a voltage source inside thermostat, and can be used for control systems with any voltage up to 250 V.
• Three temperature ranges available.
• Compliant with EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat).

Please note the thermostat must be installed via an all-pole disconnection switch.