"panel"
530 results found
Relevance
Showing 1-36 of 37
Wall Panels for Seeping Walls
Atlantis
APPLICATION: 30mm Wall PanelsPROJECT LOCATION: Redland Bay QldPROJECT DETAILS: Seeping WallsPROJECT COMPLETION: Jun 2011Atlantis fixing old water seepage problemsA property in Redland Bay Qld was having water seeping through the walls of the lower part of the property, which was below ground level.A trench was excavated to expose the walls which were below ground level, and the walls were allowed to dry out.A waterproof membrane was affixed to the wall and Atlantis® Flo- pipe® geotextile wrapped perforated pipes were clicked together and laid on top of the lower fold of the water proof membrane.A run of Atlantis® Flo-cell® drainage cells was sat on the perforated pipes and taped to the waterproof membrane, to extend along the length of the trench. The run of drainage cells was covered in hydrophilic geotextile and the trench filled in with compacted gravel.The water proof membrane formed a barrier to prevent water from contacting the walls of the property, while the 30mm drainage cell formed an air gap to relieve any hydrostatic pressure on the water proof membrane. Any water entering the drainage cell falls into the perforated pipe where it is taken away. This arrangement has been used, literally, thousands of time to overcome or prevent this seepage problem.
Colour Matching - Docklands Primary School
ECOTONE
CollaborationArchitect: Cox ArchitectureBuilder: Monaco HickeyDeveloper: Victorian School Building AuthorityMaterial & ApplicationThe off-white oxide coloured precast concrete panels of the project presented with unsightly and unacceptable patches. ECOTONE were engaged to colour the concrete surface using ECOTONE Minsil and ECOTONE Matt Plus to blend in the patches seamlessly with surrounds. The scope was then expanded to include the stained red oxide precast panels OutcomeA stunning result for both the off white and red precast concrete panels bring the project aesthetics back to design intent.
Arthur Cox, Dublin
SAS International Australia
Ireland’s second largest legal firm, Arthur Cox, has moved to its new headquarters, Ten Earlsfort Terrace, Dublin. Located a stone’s throw from St. Stephen’s Green, the LEED Platinum fit-out building is a marker of sustainable design.
Architects, Scott Talon Walker, had a specific design requirement in mind so chose SAS International for their longstanding relationship and expertise. To accommodate the number of recurring apertures, Scott Talon Walker collaborated with SAS to create bespoke service panels within the SAS330 hinged mega panel tartan grid.
The panel design features five unperforated squares which create a single unit capable of housing fire detectors, movement sensors and other electrical devices. These unique panels satisfy the client’s M&E stipulations, ensuring the building’s sustainable performance well into the future.
Additional SAS systems installed include: SAS500 acoustic lighting baffles and SAS150. Both of these systems assure complete design flexibility and service maintenance in equal measure.
Nominated for Fit Out Project of the Year – Large Office, SAS International has once again exceeded the mark to deliver premium metal ceiling solutions for its client.
University of Birmingham Library
SAS International Australia
Part of a vast regeneration programme to improve student amenities, the UoB invested £60m in a state-of-the-art academic library. The project aimed to celebrate the wider campus architectural styles and improve access to new resources like e-journals and wireless charging stations. Associated Architects chose SAS International to provide the high acoustic and finishing touches to the academic interior fit-out.
In order to create an effective library environment, acoustic performance must also be carefully considered. With the aim to create a space suited for thousands of scholars, bespoke acoustic metal wall panels were supplied to the library. Depending on the location of each tile, the panels were finished in white and black-grey PPC or anodised in regency gold. Specified with a 23% or 50% open area, the panels act as acoustic absorbers with an oblong perforation. Each panel is fitted with a black, fleece-wrapped acoustic pad for high performance.
The architects specified three additional acoustic treatments for open soffit areas over computer clusters and lounge spaces. SAS500 baffles and bespoke ring shaped and circular rafts were created by SAS International to fulfil this requirement.
The discs and raft-halos are an SAS150 hybrid designed to fulfil acoustic and service requirements while contributing to the contemporary look. Consisting of multiple panels, the concealed grid system creates a smooth finish enclosed using a steel perimeter trim. Long 3m baffles were also installed in a continuous sequence along walkways and group study areas. These options provide durable acoustic solution, minimising maintenance and improving access to the soffit and services.
Rye Residence, VIC
Alspec
The use of large panelled sliding doors deliver spacious indoor-outdoor living in this seaside home on the Mornington Peninsula.
Doha International Airport, Qatar
Rondo Building Services Pty Ltd
Rondo have supplied the suspended ceiling support frame for a metal panel ceiling which will be used in the construction of the Doha International Airport project.
Ewingsdale Residence, QLD
Alspec
Enclosed by three walls consisting of large panelled sliding doors, this rural property near Byron Bay maximises the opportunities to enjoy the sweeping rural aspect.
Hadspen Bull Run Reserve
Adventure+
The Hadspen Bull Run Reserve playground is an excellent example of a community playground that suits everyone! Located within the Meander Valley Council in Tasmania, the park is a central hangout for the community in Hadspen.
The vast range of equipment within the park is what makes this playground so special. There is something for all ages and interests, with a play unit, flying fox, multi-user rocker, wheelchair carousel, swings, single rocker, interactive panels, and a fitness station. While there is plenty for children, the fitness station also provides for the older demographic that may be minding the children on the playground, or doing their morning workout.
Having the playground accessible was an important feature in the brief provided to adventure+. To reflect this, our design team included rubber paths for access through the playground, with access to low-level interactive panels and a wheelchair carousel.
With our serious approach to play, we always aim to make our playground designs engaging and enjoyable. But, making the playground attractive is also essential. Selecting a modern colour scheme, as well as a play panel with an engraved bull image, makes the playground enticing, and ties the design to the name of the park.
Heathrow Airport, Terminal 4
SAS International Australia
The £70 million project saw SAS International design and manufacture bespoke spun aluminium profiled discs, acoustic metal wall panelling and System 600 rafts in the new terminal.
The architects 3D Reid had to make the building light, airy and modern yet the façade and various materials used within the terminal had to withstand potential of a security breach. All products installed ‘land-side’ were required to meet the requirements of Aviation Security in Airport Development (ASIAD). The result answers aesthetic demands, yet provides the highest level of performance for the requirements of the building.
For the design to be realised, square aluminium sheets were cut by the manufacturer into a circle and spun into a dome. Installation in such an environment means safety cables had to be attached to each disc, wall panel, tile and raft to ensure they do not fall and cause injury. Allowance for safety cables to be attached had to be taken into consideration during the design phase.
Large vertical wall panels with an ultra-micro perforation were also specified to provide the necessary acoustic properties required for this vast open space. The very fine 0.7mm perforation, with 1% open area, helps to manage acoustics within the large open spaced terminal.
The off-site modular manufacture of the architectural metalwork products meant installation was quicker, which causes less disruption to such a busy environment, and in addition there is no waste on site.
Aesthetic versatility can be achieved using SAS International Architectural Metalwork throughout projects. It also allows for integration of M&E services into the building design while meeting design demands and durability requirements. The range includes acoustic baffles, acoustic wall panels, air handling units, bespoke ceilings, and column casings.
Icnssc, QLD
Rondo Building Services Pty Ltd
Rondo worked closely with Wadsworth Contracting providing KEY-LOCK Concealed Ceiling Systems, Panther Access Panels, plastering beads as well as external 92mm framing, soffit framing, internal 76 & 64mm wall framing.
One New Change, London
SAS International Australia
One New Change features SAS International bespoke metal ceiling panels with an expanded metal mesh, finished in silver, red and black.
The ground-breaking, bold and perceptive £300 million One New Change mixed-use development project won the MIPIM AR Future Project Award 2010. Now complete, the building has become known as the ‘Stealth Bomber’ after the radar-proof combat plane that inspired its faceted form and has also won a RIBA 2011 Award for London and LDSA Building Excellence Award.
The design incorporates pedestrian arcades converging at the core of the building, reinstating a historic north-south pedestrian route and allowing new panoramas of London’s landmark St Paul’s Cathedral.
SAS International supplied the ceiling solution for the retail corridors of the development with a concealed suspension system, working closely with the architects to create a result where no visible fixings can be seen through the ceiling plane.
To complement this, bespoke metal ceiling panels were produced with an expanded metal mesh, finished in silver, red and black.
A challenging material to work with, to ensure the mesh held a uniform shape and corners for the panels could be formed accurately, SAS International’s solution was to create a ‘picture frame’ behind each panel. This also helped to provide support for the concealed attachment bolts.
Design challenges at One New Change included the building grid size and shape (it was termed the most difficult site in Europe), the complex geometry of the structure (including some tight ceiling to structural beam heights), and a shared fire strategy between retail and office storeys.
Requirements to achieve an environmentally-friendly building, complying with Part L and BREEAM ratings, were also critical and the design uses a materials palette of limestone, metal, mirror and a new method of fritted glass on the exterior to help shield the interior from glare.
Adelaide Convention Centre, SA
Rondo Building Services Pty Ltd
The project has called on our Technical Services Team for wall and ceiling designs, with significant quantities of Rondo systems used in the project including Rondo Stud and Track, KEY-LOCK Concealed Suspended Ceiling Systems and PANTHER Access Panels.
Lambton Square, NZ
Rondo Building Services Pty Ltd
The $11.3 million dollar renovation of Lambton Square required Rondo product throughout including our Key-Lock Concealed Ceiling System, Steel Stud Wall framing system and various other Rondo components for the fixing of plasterboard and feature panels.
Manukau Bus Station, NZ
Rondo Building Services Pty Ltd
Timber features were used throughout the project, with Decortech acoustic panels used to clad both internal and external ceilings. Rondo, in collaboration with BVT Engineering was engaged to provide design assistance for all external soffits/ceilings, internal walls and ceiling framing.
Meriton
Evergreen Walls
Meriton is a long standing client of Evergreen Walls and we are their trusted provider of any artificial greenery needs that arise. In this particular fitout we installed a green wall as a feature piece in Meriton's Pagewood Green lobby with mirrors and timber panels atop the foliage in an impressive sprawling pattern.
Ropemaker Place, London
SAS International Australia
SAS International bespoke metalwork comprising of a striking waveform shaped ceiling was designed by architects Arup Associates to feature in the construction of Ropemaker Place, London EC2 for British Land.
Simon Anson, architect at Arup Associates comments; “The purpose of the ceiling was to provide the 10.5m tall entrance foyer with an acoustic performance, and create a lighting source providing both uplight and downlight. The illuminated ceiling provides the entrance foyer with visual impact from views of City Point Plaza, Ropemaker Street and The City.”
Simon Anson continues, “The appearance of the ceiling is that of a series of illuminated vaulted waves flowing into the interior, the volume of the space perceptually expanded by the uplit waveform surfaces. The vaulted ceiling with its flowing contours provides a visually stunning focal point as well as a practical solution to the acoustic requirements of the interior of the building.”
Specialist bespoke wave ceilings were installed in the atrium, main reception area, lift lobbies and main external canopy. The waveform panel, although elegant in appearance, had to have the required strength to support the light fitting. The extra weight posed a significant design challenge of how to integrate and support the light fitting into the waveform panel. The complex design required all fixings to be concealed, as a large proportion of the face and rear of the waveform tiles are visible.
In the design development and installation of the system, Arup Associates worked closely with SAS International and the specified lighting manufacturer, Zumtobel, to ensure the panels integrated seamlessly with the luminaires to produce the optimum installation.
Westfield Centrepoint, NSW
Rondo Building Services Pty Ltd
Westfield Shopping Centre in Sydney represents the next generation of retail experiences and is quickly becoming one of Westfield’s global flagships.
In order to achieve the architectural specifications, Rondo designed a unique suspended ceiling system using boxed Rondo Steel Studs as ceiling joists to accommodate the loading of custom made timber panels.
Ronald McDonald House, SA
Rondo Building Services Pty Ltd
The project has utilised a various range of Rondo products, including Stud and Track, DUO Concealed Grid System and PANTHER Access Panels to name a few. Rondo generously donated many of these products to this amazing charity, part FOC and part subsidised. With the official opening in May 2011, this house that will lend a hand to thousands of struggling families is sure to make a difference.
QT Hotel Perth, WA
Rondo Building Services Pty Ltd
For instance, the guest room ensuite walls were mainly comprised of glazed aluminium panels made overseas. Unfortunately, this meant there were minimal tolerances in the set-out. Yet, because the hotel floors were generally the same layout, Rondo created a template system for setting out most of the guest rooms while also ensuring that ceiling heights were set exactly.
Gold Coast University Light Rail Station, QLD
Rondo Building Services Pty Ltd
Contractors Precision Interior Walls and Ceilings (PIWC) primary responsibility was the installation of the specialist linings on curved feature ceilings. PIWC Construction Manager, Ashley O’Connor mentions working closely with Rondo, and using CAD drawings to create a ceiling system before the panels were even made. “We designed and ensured the ceiling systems project’s specific design criteria were met”, said Ashley.
Hotel Jakarta, Amsterdam
Boon Edam Australia Pty Ltd
Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind.
Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels).
The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning.
A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.
Trust Towers, Abu Dhabi
SAS International Australia
This unique offset ellipse design tower had to allow the ceiling to flow around the building. A bespoke SAS330 metal ceiling system was specified incorporating trapezoidal panels.
Trust Tower forms one of three new tower blocks; part of the Central Market development. The first tower to be completed is tower three a 59-storey commercial office development.
The tower is a unique offset ellipse design, to allow the ceiling to flow around the building a bespoke. SAS330 metal ceiling system was specified incorporating trapezoidal panels.
Enabling a monolithic finish to the ceiling plane, black service troughs house recessed lighting and other MEP services; this enables maximum acoustic performance to be achieved from the ceiling tiles.
Over 900 different sized ceiling tiles were manufactured and installed throughout the project. Metal ceilings provide durability, accessibility to the ceiling void and low maintenance. The life-span of SAS International’s metal ceilings is in excess of 25 years with only very basic maintenance.
The entrance mezzanine area features a four-storey high ceiling finished in midnight blue, providing a dramatic entrance to this iconic building.
Crown Towers, WA
Rondo Building Services Pty Ltd
The tower corridors to the hotel rooms followed a slight curve and the Rondo Technical Services Team were engaged to provide many engineered designs for both internal and external wall framings, as well as internal ceilings and external soffit framings. This included Stud & Track, MAXIframe External Wall Framing System, EXANGLE Finishing Sections and PANTHER Access Panels, all needed to meet the detail required throughout the tower and podium levels.
South Australian Health & Medical Research Institute (SAHMRI), SA
Rondo Building Services Pty Ltd
With a demand for leading scientific research facilities growing year upon year, the South Australian Government commissioned the development of the South Australian Health & Medical Research Institute (SAHMRI). Since the project commenced in 2010, Rondo has supplied our KEY-LOCK Suspended Ceiling System, Steel Stud and Track, DUO Exposed Grid Ceiling System, PANTHER Access Panels, Shaftwall and Walk-About Trafficable Ceiling System.
New Street Station, Birmingham
SAS International Australia
Birmingham New Street Station was originally re-built in 1967 to accommodate 650 trains carrying 60,000 passengers per day. By 2010 it had become the busiest station outside of London, operating at more than twice its intended capacity.
The first half of the refurbishment was completed in 2013. The station’s recently updated configuration should now accommodate a yearly 8.3% rise in passenger numbers.
SAS International commenced work on the three-phase project in June 2012. NG Bailey and main contractor Mace installed SAS systems across the platforms, the shopping centre and the concourse.
Full scale, physical mock-ups of the bespoke ceiling solutions were built on-site to ensure design intent prior to installation. The integration of fans for smoke extraction and complex wind loads had to be considered to guarantee passenger safety. The wind loads were a concern as trains passing platforms at speed can cause considerable negative loads.
Bespoke ceilings comprising fixed angle bulkheads were installed in line with the curving platforms. The typically trapezoidal bulkheads were bolted end to end in order to form a faceted layout to follow these curves.
Using shared data from the project’s BIM model, SAS International used a point cloud to measure the platforms and 3D model the panels. The model’s geometry revealed that the platforms were all non-uniform. This posed a significant design challenge. The data required careful analysis in order to achieve a smooth curved line within the platform edge. This was essential to provide train drivers with an unobstructed view coming into and out of the station.
The SAS International design team was able to rationalise the number of unique panel types down to four. This overcame the driver visibility issue, ensured uncompromised aesthetics and brought costs within budget. Electronic Total Station setting-out techniques were then used to set out the panels along the curve.
Health & Innovation Building, SA
Rondo Building Services Pty Ltd
he developments $247.3m price tag makes it marginally more expensive than the $246m Adelaide University building next door. HIB will house the Centre for Cancer Biology and UniSA’s pharmacy school, with 450 researchers between them. Rondo’s involvement included providing ceiling and wall systems using our Shaftwall One-Way Erected System, KEY-LOCK Concealed Ceiling System and PANTHER Access Panels to create the desired effect.
Forensic Pathology & Coroner’s Court, NSW - Vitracore G2
Fairview Architectural
The Forensic Pathology & Coroner's Court is located in Lidcombe NSW. Fairview's deemed-to-satisfy non-combustible Vitracore G2 panels were chosen to achieve the unique exterior as designed by Silver Thomas Hanley and Cox Architecture, The design features vertical fins with pyramid details in five complementary finishes - Fresh Green, Pure White, Cool Grey from Fairview standard range and custom colours. Bechett and Irish Moore. Builder: Watpac NSW, Architect: Silver Thomas Hanley & Cox Architecture.
Barangaroo Tower, NSW
Bent & Curved Glass
Designed by Woods Bagot Pty Ltd and built by Lend Lease Group, BCG manufactured curved heat strengthened laminated glass panels for the feature stair to the entry lobby of the first completed commercial tower at Barangaroo – International Towers Sydney (ITS) 2. Working closely with Woods Bagot Architects and fabricators F & D Normoyle Engineering, BCG assisted with the fine tuning of the detail design. BCG’s precision bending and laminating processes provided the quality of finish and timely supply required to ensure the successful completion of the project.
Waverley Residence, NSW
Bent & Curved Glass
Designed and built by C Plus C Architectural Workshop. Large format curved glass panels up to 2400mm high x 3500mm girth have been manufactured by Bent & Curved Glass in a variety of glass types to meet the design requirements for thermal performance, privacy, night lighting effects while also maximising natural light and a sense of space and openness. Early consultation between architect, glass manufacturer and frame fabricator and a process of glass sampling, review and selection created the best project outcomes. The quality of these glass elements has made a significant contribution to the success of this exceptional project.
Prima Pearl Apartments, VIC
Rondo Building Services Pty Ltd
Rondo has delivered exceptional expertise and technical assistance during the design and construction of Melbourne’s Prima Pearl, residential skyscraper. This prestigious 667 apartment landmark boasts unparalleled amenities across 72 levels, some of which include a private cinema, virtual golf driving range and Level 67 Sky Lounge. By assisting Brookfield Multiplex Constructions’ architects at the design stage, Rondo has ensured our products are readily accessible on site, resulting in less design enquiries during construction. Rondo will be supplying the project with Stud and Track in 64mm, 76mm and 92mm sizes, KEY-LOCK Concealed Suspended Ceiling System and PANTHER Access Panels.
DNV GL Energy Office
Boon Edam Australia Pty Ltd
TenneT's former head office at the Arnhems Buiten business park has been renovated and converted into one of the most sustainable office buildings in the Netherlands. It is now the head office of DNV GL's energy branch, which employs 2,500 energy experts worldwide. It is DNV GL's largest office building in the Netherlands.
The site accommodates about 400 DNV GL employees and covers about 10,000 m2 of office and lab space. The building has achieved an A energy label thanks to innovations such as the use of seasonal thermal energy storage, solar panels, HR +++ glass and a highly efficient heating and cooling system.
Boon Edam installed a sliding door at the main entrance, and three Speedlane Slide access gates and two Winglock 900 swing barrier gates in the central hall behind the main entrance to prevent unauthorised entry.
Ready to Set Sail at the Brisbane International Cruise Terminal
Flowcrete
The brand new state-of-the-art $177 million Brisbane International Cruise Terminal was completed in mid-2020 and will serve as a gateway for the Queensland tourismsector. The 9,300m² terminal was designed by Arkhefield in collaboration with Arup will provide visitors with a world class experience.The public spaces including the internal walkways, communal areas and departure lounge featured 1,500m² of Flowcoat Terrosso in four bespoke colour combinations.The decorative resin-based flooring system was chosen to provide a decorative, seamless flooring system that would not only create a luxurious and welcome environment, but withstand the expected foot traffic.A further 1,200m² of Deckshield ID was applied to the foot bridge, providing passengers with a slip resistant and safe surface as they board or disembark some of the biggest cruise ships in the world.Tremco CPG Australia’s portfolio of industry leading products provided not just a flooring solution for the world-glass tourism facility. In addition to the Flowcreteflooring systems, Tremco CPG Australia also provided the structural glazing silicone Proglaze II to a total of 218 glass panels.
The Beverly, Broadbeach Waters
ECOCLEAN
LOCATIONBroadbeach Waters, QueenslandCOLLABORATIONDesigned by: Smek DesignBuilder: Live BuildBRIEFPreserve and protect the concrete elements of the high-end residential homeMATERIAL & APPLICATIONECOCLEAN Concrete Sealer(Specified concrete on the project including the bar area, front fence, and garden bed)OUTCOMEThe Beverly is a stunning $7.7mil high-end residential building sitting right on the water at Broadbeach Waters QLD. It was a pleasure for our QLD team to work in such a fantastic location. Our Concrete Sealer will keep the concrete looking clean, allow water to bead off the concrete and reduce carbonation which will extend the asset life of the concrete.TESTIMONIALWorking with ECOCLEAN has been a stress-free experience. The whole process was professional and positive from start to finish. The work is perfection. The concrete-look colour stain is seamless and the sealer used for all our pre-cast concrete panels have not had any issues with water damage or staining. I would highly recommend them and would be using them for all future projects.Ryan and Guech Venville, Homeowner
Uppsala University, Sweden
Boon Edam Australia Pty Ltd
When entering the new Segerstedthuset building at the Uppsala University in Sweden – guests, students and employees alike are cheerfully greeted by a colourful revolving door. This unique door is an art installation by renowned American artist Spencer Finch and is aptly named ‘The Colour Wheel’. The artist is best known for installations that visualise his experience of the nature of light, colour, memory.
The Uppsala University is the oldest university research university in the Nordic area and this large facility is located in Uppsala, Sweden - educating 45000 students. The new Segerstedthuset building, designed by 3XN is a multi-purpose extension to the university and was conceptualised and constructed as a modern workplace for researchers, university administration and management. Boon Edam Sweden was approached to supply Spencer Finch with two Tourniket revolving doors.
The doors measure a diameter of 3000 mm and a total height of 2400 mm and the 6 glass door panels provide the canvas for the light installation artist to work his magic on. Colour film is fitted between the glass which creates a truly remarkable and memorable entry experience into this urban, communal space. The Segerstedthuset building was built as a sustainable building and proved to meet high environmental standards such as efficient energy use, sound material choices and a silent indoor environment. The building is environmentally certified according to the Sweden Green Building Council at the silver level.
Eastland Shopping Centre
RBA Group
The Eastland Shopping Centre features the following RBA products:B2250 – Free Standing Waste BinB295x14 – Accessible Compliant Stainless Steel ShelfRBA4177-120 – Shower Curtin Track (aluminium)RBA4177-999-001 – Taffeta shower curtainB683X24 – ShelfRBA4150-239 – 40° Wraparound Grab Rail & Backrest, Right HandRBA4150-240 – 40° Wraparound Grab Rail & Backrest, Left HandB819687 – Folding Shower SeatRBA4110-927 – Shower ‘T’ Grab Rail w/ Handset, Slider & Hose, LHRBA4090-450 – 90° Grab Rail, Ambidextrous AmbulantRBA4007-113 – Bariatric Drop Down Rail (left hand transfer with toilet roll holder)RBA4007-115 – Bariatric Drop Down Rail (right hand transfer with toilet roll holder)RBA4000-090 – 900mm Straight Grab BarB715E – Elan Hand DryerB7128E – Trimline Hand DryerB682 – Double Hook VerticalB3803 – Paper Towel Dispenser and Waste Bin, TrimlineB36903 – Paper Towel & Waste Bin, Small, TrimlineRBA7730-860 – Panel Mounted Soap DispenserB2012 – Sensor Soap DispenserB6807 – Soap DishB2890 – Jumbo Toilet Roll HolderB2888 – Classic Toilet Roll HolderB2721 – Interleaved Toilet Tissue Dispenser
Qantas Headquarters, Mascot, Australia
SAS International Australia
7000m² of SAS310 helped Qantas Airways overcome acoustic challenges, controling reverberation time and meeting a very high acoustic performance target.
Qantas Airways Limited, nicknamed ‘The Flying Kangaroo’, is Australia’s largest airline. The new headquarters is the largest property project undertaken by Qantas Airways in the last 10 years.
The project aims to rejuvenate the existing campus, consolidating and upgrading four existing office buildings and joining them together with an interconnecting hub. Selected areas of the existing building floorplate have been extended into the new atrium space creating balconies and office pods. These improved physical and visual connections aim to encourage interaction and engagement between workers.
With a brief for high acoustic performance, SAS International were an obvious choice for Hassell architects, due to our vast portfolio of high acoustic rated metal ceiling tiles. SAS provided 7000m² of SAS310. The acoustic challenge was to control the reverberation time in a large volume space accommodating a PA system and a very high acoustic performance target. The reverberation time was significantly reduced with the addition of absorptive material and purposed designed acoustic ceiling panels.
Qantas Headquarters was constructed with longevity in mind so the durability of the tiles was key, an advantage of using metal. The finish completely meets the performance demands, is extremely functional and cost effective, an A Grade corporate campus that incorporates the latest developments in sustainability and energy efficiency.
Showing 1-36 of 37